Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
05.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6406/1-2

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6406/1-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6406/1-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NA01 M2 - 3D inline 2386-xline1600
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Agip AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1064-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    71
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    26.06.2003
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    04.09.2003
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    04.09.2005
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    29.12.2005
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LANGE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    383.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4500.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4492.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    8.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    164
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    RED BEDS (INFORMAL)
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 55' 32.23'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 7' 55.71'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7203419.29
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    364414.82
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    4762

  • Wellbore history
    General
    Well 6406/1-2 was drilled on the Sklinna prospect in the Norwegian Sea ca 10 km west of the Kristin Field. The Sklinna prospect is a faulted structural closure within a huge structure at Base Cretaceous level on the Sklinna High. The area closure was about 60 km2; crestal depth at ca 4160 m msl, and structural relief of more than 600 m. Structural closure was observed on all levels from The Lysing Fm and deeper. Therefore all possible reservoir levels like the Lysing and Lange sandstones were possible targets, but the primary target was the hydrocarbon potential in the Early Jurassic sandstone reservoirs of the Båt Group.
    Operations and results
    Wildcat well 6406/1-2 was spudded with the semi-submersible installation Deepsea Bergen on 26 June 2003 and drilled to TD at 4500 m in the Triassic Red Beds. The well was drilled with seawater/ high viscous sweeps with seawater/PAC spud mud down to 1205 m, with a water based silicate mud (Sildril) from 1205 m to 2415 m, and with Versapro oil based mud from 2415 m to TD. In addition to Versapro, Versatrol, VersaVert, and EDC99-ESCAID were used in intervals in the oil-based section. No shallow gas was observed.
    No significant sand development was encountered above the Lange Formation. The well encountered Hydrocarbon bearing sandstone of Turonian age in the Lower Lange Formation from 4163 m - 4185 m (4157 - 4181 m TVD). The Early Jurassic Båt group was not present in the well as the Early Cretaceous rested unconformably on Triassic sediments. The reservoir hydrocarbon samples taken at 4178 m were all found to have more than 90 % mud contamination. A number of different petroleum-like products were used in the oil-based drilling mud, including Versatrol, which is a trade name for Gilsonite, a natural petroleum asphalt. Due to this strong contamination the PVT program was reduced and of all the geochemical analyses only the optical analyses (e.g. vitrinite reflectance), the gases and the light hydrocarbons were unaffected. The well was found to be immature down to about 3000 m. The lean Cretaceous and Triassic sediments below this depth had relatively poor source rock potential. The chemical and isotopic composition of the gas and light hydrocarbons in the reservoir indicated a high-mature situation. Comparison with other data from the area indicated that the gasses had an affinity to the Spekk Formation, while the light hydrocarbons had some characteristics pointing to the Åre Formation. The heavier hydrocarbons (the oil) were masked by the oil-based mud and could not be characterized. Neither the Åre nor the Spekk Formations are present in the well.
    No conventional core was taken in the well. Fifteen sidewall cores were retrieved out of 25 attempts. Due to tight hole and cemented formation MDT pressure test and sampling was only successful at 4178 m. Seven samples were taken, 4 MPSR, 2 SPMC and one gallon sample. Gas, condensate and mud filtrate was sampled, no formation water was observed. All samples were strongly contaminated by oil-based mud.
    The well was permanently abandoned on 4 September 2003 as a gas/condensate discovery.
    Testing
    No drill stem test was performed in the well.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1210.00
    4500.00

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    3350.0
    [m]
    DC
    OD
    3360.0
    [m]
    DC
    OD
    3370.0
    [m]
    DC
    OD
    3380.0
    [m]
    DC
    OD
    3395.0
    [m]
    DC
    OD
    3400.0
    [m]
    DC
    OD
    3462.0
    [m]
    DC
    OD
    3471.0
    [m]
    DC
    OD
    3483.0
    [m]
    DC
    OD
    3495.0
    [m]
    DC
    OD
    3501.0
    [m]
    DC
    OD
    3513.0
    [m]
    DC
    OD
    3530.0
    [m]
    DC
    OD
    3540.0
    [m]
    DC
    OD
    3605.0
    [m]
    DC
    OD
    3840.0
    [m]
    DC
    OD
    4224.0
    [m]
    DC
    OD
    4256.0
    [m]
    DC
    OD
    4300.0
    [m]
    DC
    OD
    4315.0
    [m]
    DC
    OD
    4350.0
    [m]
    DC
    OD
    4404.0
    [m]
    DC
    OD
    4452.0
    [m]
    DC
    OD
    4500.0
    [m]
    DC
    OD

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.58

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.00

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    2.48
    .PDF
    1.67

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    IPLT AIT
    4072
    4506
    MDT
    4178
    4178
    MDT IPLT
    4177
    4186
    MSCT
    4155
    4474
    MWD - LWD GR RES DIR
    3908
    4500
    MWD LWD - GR DIR
    3645
    3852
    MWD LWD - GR RES DEN NEU PWD SON
    2427
    3645
    MWD LWD - GR RES DIR SON
    454
    2415
    MWD LWD - GR RES SON DEN NEU PWD
    3852
    3908
    OBDT DSI
    2770
    4500
    VSP APS
    1900
    4480

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    455.0
    36
    455.0
    0.00
    LOT
    SURF.COND.
    20
    1199.0
    26
    1201.0
    1.50
    LOT
    INTERM.
    13 3/8
    2404.0
    17 1/2
    2415.0
    1.87
    LOT
    INTERM.
    9 5/8
    3901.0
    12 1/4
    3908.0
    2.00
    LOT
    LINER
    7
    4140.0
    8 1/2
    4140.0
    2.07
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    578
    1.47
    18.0
    WBM (SILDRIL)
    858
    1.80
    29.0
    OBM (VERSAPRO)
    1210
    1.03
    SPUD MUD
    1210
    1.03
    SPUD MUD
    2415
    1.53
    24.0
    SILDRIL
    2835
    1.70
    50.0
    OIL (ENVIRON)
    3575
    1.70
    45.0
    OIL (ENVIRON)
    3835
    1.75
    47.0
    OIL (ENVIRON)
    3955
    1.91
    55.0
    OBM (VERSAPRO)
    4140
    1.89
    46.0
    OBM (VERSAPRO)
    4494
    1.98
    35.0
    OBM (VERSAPRO)
    4500
    1.98
    34.0
    OBM (VERSAPRO)

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.27