Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/5-6

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/5-6
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/5-6
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Amoco Norway Oil Company
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    196-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    95
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.05.1978
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    16.08.1978
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    16.08.1980
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    02.04.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    68.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4132.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    4.75
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    147
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 34' 13.24'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 37' 16.57'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6269872.65
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    538176.24
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    261

  • Wellbore history
    General
    Well 2/5-6 was drilled on the Siv structure, only 800 m northeast of the 2/5-4 discovery well. The Siv structure is a north-south trending anticline. The primary objective of well 2/5-6 was to establish the possibility of Jurassic sands being present along the west side of the Mandal High and to evaluate the hydrocarbon potential of these sands on the Siv structure. Sands of this age had previously been encountered in the BP block 7/12 further to the north. In addition, the well was planned to appraise the Chalk reservoirs found to be oil-bearing by Amoco well 2/5-4.
    Operations and results
    Wildcat well 2/5-6 was spudded with the semi-submersible installation Norskald on 14 May 1978 and drilled to TD at 4132 m in the Triassic Skagerrak Formation. A bentonite slurry used while drilling the first two intervals, 30" casing was set at 166 m and 20" casing at 540 m. The 17 1/2" hole was drilled using a seawater native solids mud. Problems were encountered as casing point was approached, sloughing shale and tight hole proved troublesome and the mud weight was increased to 10.6 lb/gal before running 13 3/8" casing to 1852 m. The 12 1/4" hole was drilled initially with a gypsum CMC mud. Tight hole was a significant problem until a depth of approximately 2900 m. At 2950 m the mud was converted to a dispersed lignosulphonate system to obtain more stable rheological properties. This mud was used until a depth of 3967 m. Tight hole was experienced on trips at a depth of 2000 m. The pipe was stuck at 3640 m and a fish was left in the hole. The 9 5/8" casing was set above the fish at a depth of 3560 m and a technical sidetrack was performed. The 8 1/2" hole was drilled using the same mud to a depth of 3967 m. At this point, in a Middle Jurassic sand, a salt water flow high in magnesium and calcium delayed operations considerably. The mud was converted to a brine polymer type system and the mud weight was raised to 17.4 lb/gal in order to quell the salt-water flow. This mud was used to TD.
    Top Paleocene (Balder Formation) was encountered at 2910 m, top Danian Chalk (Ekofisk Formation) at 3048 m, top Maastrichtian chalk (Tor Formation) at 3151 m, and top Campanian chalk (Hod Formation at 3285 m. The primary objective, the Jurassic sands were encountered at depths of 3912 m (Late Jurassic) and 3946 m (Middle Jurassic). Gross sand thickness for each interval was 13 m and 142 m respectively, with net sand thickness of 10 m and 69 m. The average porosities for these sands were 19.4% (from core) and 25-30% in the Late and Middle Jurassic, respectively. Analysis of electric logs indicated 60% water saturation in these sands and only poor shows were observed. The chalk, the secondary target, was water wet with only poor shows.
    One conventional core was cut, after sidetracking, at 3915 - 3925 m in the Late Jurassic sand. A wire line FIT fluid sample was taken at 3919.5 m in the Late Jurassic sand. The sample recovered 8.5 l mud/water and 71 l gas.
    The well was permanently abandoned on 16 August 1978 as a dry well with shows.
    Testing
    No drill stem test was performed

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    200.00
    3946.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3915.0
    3925.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    10.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    93
    2910
    2910
    2923
    2929
    3024
    3048
    3048
    3151
    3285
    3596
    3946
    4087
    4087

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.31
    pdf
    1.67
    pdf
    0.21
    pdf
    0.39

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    22.76
    pdf
    45.21

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CDM
    1850
    3590
    CDM
    3972
    4135
    CDM AP
    1865
    3585
    DLL MSFL
    2850
    3590
    DLL MSFL
    3970
    4135
    FDC CNL
    2850
    4137
    ISF SONIC
    166
    528
    VELOCITY
    166
    4130

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    167.0
    36
    168.0
    0.00
    LOT
    SURF.COND.
    20
    540.0
    26
    541.0
    0.00
    LOT
    INTERM.
    13 3/8
    1847.0
    17 1/2
    1850.0
    0.00
    LOT
    INTERM.
    9 5/8
    3540.0
    12 1/4
    3542.0
    0.00
    LOT
    LINER
    7
    3967.0
    8 1/2
    3967.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    166
    1.01
    bentonit
    550
    1.01
    bentonit
    1855
    1.13
    Gypsum
    2193
    1.55
    Gypsum
    2550
    1.61
    Gypsum
    2988
    1.66
    seaw/ligno
    3134
    1.66
    seaw/ligno
    3211
    1.70
    seaw/ligno
    3544
    1.68
    seaw/ligno
    3602
    1.70
    seaw/ligno
    3967
    1.98
    brine/polym
    4057
    2.13
    brine/polym
    4132
    2.13
    brine/polym

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22