Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
31.10.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7/11-3

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7/11-3
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7/11-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Phillips Petroleum Company Norway
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    20-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    114
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    17.10.1968
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.02.1969
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.02.1971
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.01.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    27.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    79.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3350.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    133
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PALEOCENE
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    EKOFISK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    57° 2' 58.8'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 28' 18.8'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6323180.27
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    467959.73
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    159
  • Wellbore history

    General
    Well 7/11-3 was drilled ca 3.5 km south-east of the 7/11-1 Cod discovery well on the eastern side of the Breiflabb Basin in the southern North Sea. The objective was to test the extension of the Paleocene sands that were found hydrocarbon bearing in wells 7/11-1 and 7/11-2.
    Operations and results
    Appraisal well 7/11-3 was spudded with the semi-submersible installation Ocean Traveller on 17 October 1968 and drilled to TD at 3350 m. The hole collapsed when drilling a shale section between 1950 m and 2300 m. Bridging took place until the mud weight was increased to 14.5 ppg. Otherwise the well was drilled without significant problems. The well was drilled with a Drispac-Flosal-Desco system, which was salt saturated when drilling the lower part of the hole.
    Minor amounts of oil and gas was tested in a Forties Formation sandstone sequence correlated to the best sandstone sequences that were tested in the two first Cod wells.
    Three cores were cut in the intervals 3074.2 to 3082 m, 3092.8 to 3105 m, and 3160.3 to 3177.2 m. No wire line fluid samples were taken.
    The well was permanently abandoned on 7 January 1969 as an oil appraisal well.
    Testing
    Eight drill stem testes were carried out.
    DST 1 tested the interval 3239.7 to 3246.4 m. It produced a total of 15 m3 diesel cushion, mud and water. Bottom hole temperature was 129 deg C.
    DST 2 tested the interval 3210.2 to 3231.8 m. It produced a total of 14.5 m3 water, diesel cushion and mud. Bottom hole temperature was 128 deg C.
    DST 3 tested the interval 3176.9 to 3202.2 m. It produced a total of 14.5 m3 water, diesel cushion and mud. Bottom hole temperature was 128 deg C.
    DST 4 tested the interval 3160.5 to 3172.4 m. It produced a total of 14 m3 water, diesel cushion and mud. Bottom hole temperature was 127 deg C.
    DST 5 tested the interval 3126 to 3144 m. It produced a total of 8 m3 water, diesel cushion and mud.
    DST 6 tested the interval 3096 to 3110 m. It produced a total of 38.5 m3 water, diesel cushion and mud.
    DST 7 tested the interval 3086.1 to 3092.2 m. It produced 14 m3 oil, 4400 Sm3 gas and 54 m3 water/day through a choke. The stock tank gas/oil ratio was 237 Sm3/Sm3. The oil was greenish-black and its gravity was 47 deg API. The bottom hole temperature at 3081.5 m was 123 deg C.
    DST 1 tested the interval 3036 to 3045 m. This test gave no flow.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    NO
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    560.80
    3349.75
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3074.2
    3082.0
    [m ]
    2
    3092.8
    3105.0
    [m ]
    3
    3160.3
    3177.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    37.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    3074.2
    [m]
    C
    OD
    3078.5
    [m]
    C
    OD
    3081.8
    [m]
    C
    OD
    3092.8
    [m]
    C
    OD
    3095.5
    [m]
    C
    OD
    3103.8
    [m]
    C
    OD
    3162.6
    [m]
    C
    OD
    3166.3
    [m]
    C
    OD
    3176.0
    [m]
    C
    OD
  • Lithostratigraphy

    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    106
    1584
    3032
    3032
    3044
    3084
    3286
    3333
    3333
  • Geochemical information

    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.86
    pdf
    0.89
  • Documents – reported by the production licence (period for duty of secrecy expired)

  • Documents – Norwegian Offshore Directorate papers

    Documents – Norwegian Offshore Directorate papers
    Document name
    Document format
    Document size [MB]
    pdf
    24.45
    pdf
    32.57
    pdf
    12.36
  • Drill stem tests (DST)

    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3241
    3247
    0.0
    2.0
    3211
    3233
    0.0
    3.0
    3180
    3203
    0.0
    4.0
    3161
    3173
    0.0
    5.0
    3127
    3145
    0.0
    6.0
    3097
    3111
    0.0
    7.0
    3087
    3093
    0.0
    8.0
    3037
    3046
    0.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    3.0
    4.0
    5.0
    6.0
    7.0
    123
    8.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2.0
    3.0
    4.0
    5.0
    6.0
    7.0
    14
    4400
    237
    8.0
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL
    1951
    3292
    CDM
    2920
    3349
    FDC
    2927
    3351
    GR
    91
    494
    IES
    1972
    3351
    LL-7
    2927
    3351
    MLL
    2927
    3351
    SGR
    494
    3351
    SNP
    2927
    3299
    SP
    1974
    3351
    VSP
    494
    3351
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    20
    172.0
    26
    176.0
    0.00
    LOT
    INTERM.
    13 3/8
    496.0
    17 1/2
    511.0
    0.00
    LOT
    INTERM.
    9 5/8
    1973.0
    12 1/4
    1994.0
    0.00
    LOT
    PROD.
    7
    3341.0
    8 1/2
    3351.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    141
    1.05
    waterbased
    502
    1.22
    waterbased
    1993
    1.43
    waterbased
    2298
    1.55
    waterbased
    2743
    1.72
    waterbased
    3179
    1.65
    waterbased
  • Thin sections at the Norwegian Offshore Directorate

    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    10086.00
    [ft ]
    10147.00
    [ft ]
    10147.00
    [ft ]
    10183.00
    [ft ]
    10423.00
    [ft ]