Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
12.11.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/7-8

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/7-8
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/7-8
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LINE PGE 217 M SP: 375
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Phillips Petroleum Company Norway
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    85-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    66
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    08.06.1973
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    12.08.1973
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    12.08.1975
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    26.10.2009
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PALEOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    EKOFISK FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    LATE CRETACEOUS
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    TOR FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    34.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    70.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3318.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    104
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HOD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 23' 8.6'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 19' 6.6'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6249195.05
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    519666.78
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    267

  • Wellbore history
    General
    Well 2/7-8 is located In the Feda Graben of the southern North Sea, some 3 km west of the Eldfisk Field. It was drilled on the East Eldfisk Structure, and the main objective was to test the Danian Limestone. Secondary objective was to test the Late Cretaceous Chalk, which could by hydrocarbon bearing if porosity is present.
    Operations and results
    Wildcat well 2/7-8 was spudded with the jack-up installation Zapata Explorer on 8 June 1973 and drilled to TD at 3318 m in the Late Cretaceous Hod Formation. The well was drilled with seawater and hi-vis slugs down to 1220 m, and with a lignosulphonate mud (UNI-CAL / Caustic) from 1220 m to TD. According to the mud program the section below 1220 m was drilled with 4% diesel in the mud.
    The Danian Limestone, which was expected to be 100 m thick with 38 m of net pay, was found to be much thinner than the other wells on Eldfisk, and was only 9 m thick. It was also less fractured than other wells on Eldfisk, but still yielded commercial quantities of oil and gas, after acidization, over the total interval on the third of three drill stem tests. This test included the top 23 m of the Late Cretaceous (Maastrichtian). The remaining tests below this interval, also in the Maastrichtian, did not produce oil or gas in commercial amounts. The truncated Danian, the lack of fracturing and secondarily porosity, and the fact that the produced oil was heavier than the oils on the main Eldfisk structure to the west, suggested that East Eldfisk structure is not in communication with the main Eldfisk structure.
    No cores were cut and no wire line fluid samples were taken.
    The well was permanently abandoned on 12 August 1973 as an oil discovery.
    Testing
    Four drill stem tests were performed.
    DST 1 and 2 tested the interval 3039 - 3051 m in the Maastrichtian Tor Formation. DST 1 gave no production. DST 2, after acidization, produced 1 litre fluid (95% water and 5% oil) pr hour.
    DST 3 tested the interval 3014 - 3033 m in the Tor Formation. It produced 13.5 Sm3 oil and 2407 Sm3 gas/day. The corresponding GOR is 178 Sm3/Sm3, and the measured oil gravity was 14 deg API.
    DST 4 tested the interval 2969 - 3001 m in the Danian Ekofisk Formation and the upper Tor Formation. It produced 539 Sm3 oil and 53802 SM3 gas/day. The corresponding GOR is 100 Sm3/Sm3, and the measured oil gravity was 33 deg API.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    NO
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1237.49
    3318.36

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    104
    1850
    2874
    2874
    2886
    2920
    2963
    2969
    2969
    2978
    3028

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.35
    pdf
    5.04

  • Documents – Norwegian Offshore Directorate papers
    Documents – Norwegian Offshore Directorate papers
    Document name
    Document format
    Document size [MB]
    pdf
    72.88
    pdf
    0.56

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3039
    3051
    0.0
    2.0
    3039
    3051
    0.0
    3.0
    3014
    3033
    0.0
    4.0
    2969
    3001
    0.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    3.0
    40.000
    27.000
    4.0
    40.000
    37.000
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2.0
    3.0
    13
    2406
    0.970
    4.0
    539
    53789
    0.860

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    4ARM DIPLOG
    8700
    10886
    BHC AC GR
    230
    3995
    BHC AC GR
    4004
    8044
    BHC AC GR
    8033
    10877
    CBL
    230
    585
    CBL
    300
    3940
    CBL
    5400
    7700
    CBL
    7720
    10814
    CNL
    9300
    10886
    FDC
    9300
    10886
    IEL
    1600
    10887
    ML
    9300
    10886
    VELOCITY
    230
    10887

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    154.0
    36
    155.0
    0.00
    LOT
    SURF.COND.
    20
    488.0
    26
    497.0
    0.00
    LOT
    INTERM.
    13 3/8
    1220.0
    17 1/2
    1229.0
    0.00
    LOT
    INTERM.
    9 5/8
    2449.0
    12 1/4
    2457.0
    0.00
    LOT
    LINER
    7
    3311.0
    8 1/2
    3318.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    174
    1.10
    waterbased
    487
    1.07
    55.0
    waterbased
    548
    1.37
    50.0
    waterbased
    762
    1.43
    55.0
    waterbased
    1066
    1.49
    55.0
    waterbased
    1219
    1.37
    55.0
    waterbased
    2900
    1.72
    51.0
    waterbased
    3318
    1.71
    51.0
    waterbased