Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6305/8-2

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6305/8-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6305/8-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    A/S Norske Shell
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1542-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    59
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    24.09.2014
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    21.11.2014
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    21.11.2016
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    21.11.2016
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PALEOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    EGGA FM (INFORMAL)
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    40.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    616.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3078.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3078.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.8
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SPRINGAR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    63° 19' 42.05'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    5° 21' 36.69'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7024521.08
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    618191.06
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7579

  • Wellbore history
    General
    Well 6305/8-2 was drilled to appraise the southern part of the Ormen Lange Field in the Sothern Norwegian Sea. The objective of well 6305/8-2 was to delineate the field to the south, as it was unclear whether the area was optimally drained or not by existing production wells.
    Operations and results
    Appraisal well 6305/8-2 was spudded with the semi-submersible installation Transocean Barents on 24 September 2014 and drilled to TD at 3078 m in the Late Cretaceous Springar Formation. No significant problem was encountered in the operations. The well was drilled with seawater and bentonite sweeps down to 1499 m, with KCl/polymer/glycol mud from 1499 m to 2897 m, and with Innovert NS oil based mud from 2897 m to TD.
    Top of the Egga Informal Formation Reservoir was encountered at 2906.5 m 23.5 m deeper than prognosed. Below Egga from 3005 to 3015 m an undifferentiated unit was penetrated before entering the Maastrichtian age Jorsalfare Formation. The Egga contained a 28-metre gas column down to a current GDT at 2936.0 m, and an underlying water zone with very good reservoir quality. The water zone in the lower part of Egga has extreme core permeabilities in the several Darcy range, often exceeding five Darcy. Below the GDT, the interpretation indicated a swept zone down to ca 2950 m followed by a residual gas zone down to ca 2969 m. All sands are fully water bearing below this depth.  Both the undifferentiated unit and the Jorsalfare Formation were aquiferous with very good and poor to very good reservoir quality, respectively. The water zone is 70 metres in total. Wireline pressure measurements show depletion due to production in the D-template area. Pressure depletion relative to the closest exploration well 6305/7-1 vary from a high of 88.5 bar to a low of 7.4 bar.
    Four consecutive cores were cut from 2898 to 3006.5 m, from the shale unit above the reservoir and down through the whole of Egga. MDT water samples were taken at 2991.7 m in Egga and at 3012 m in the underlying undifferentiated unit.
    The well was permanently abandoned on 21 November 2014 as a gas appraisal well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1500.00
    3078.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2910.0
    2924.4
    [m ]
    2
    2924.4
    2952.2
    [m ]
    3
    2952.2
    2978.0
    [m ]
    4
    2978.0
    3005.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    95.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DEN SON CAL GR
    731
    2897
    GR RES DEN NMR SPEC GR
    2830
    3080
    MDT MFRAC
    2904
    3046
    MFRAC
    2904
    2975
    MFRAC
    2920
    2960
    MIC RES SON CBL VDL
    2576
    3081
    MWD - DI
    655
    737
    MWD - GR RES PWD DI
    724
    2000
    MWD - GR RES PWD DI
    1794
    2897
    MWD - GR RES PWD SON NEU DEN DI
    2896
    3068
    MWD - PWD DI
    2889
    3077
    VSP GR
    655
    1980
    VSP GR
    1675
    2879
    VSP GR
    1790
    2897
    VSP GR
    2711
    3062

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    734.1
    42
    737.7
    0.00
    SURF.COND.
    20
    1492.4
    26
    1496.6
    1.25
    LOT
    PROD.
    13 5/8
    1996.4
    17 1/2
    2001.0
    1.35
    LOT
    LINER
    9 5/8
    2896.5
    12 1/4
    2897.0
    1.21
    LOT
    OPEN HOLE
    3078.0
    8 1/2
    3078.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    655
    1.03
    Seawater
    1480
    1.25
    KCl / NaCl /Glycol polymer mud
    1480
    1.30
    P&D Mud
    1498
    1.30
    KCl/Polymer Displacement
    1499
    1.25
    KCl / NaCl /Glycol polymer mud
    1714
    1.28
    KCl / NaCl /Glycol polymer mud
    1863
    1.32
    KCl / NaCl /Glycol polymer mud
    2001
    1.35
    KCl / NaCl /Glycol polymer mud
    2029
    1.41
    KCl / NaCl /Glycol polymer mud
    2897
    1.20
    INNOVERT NS OBM
    2897
    1.41
    KCl / NaCl /Glycol polymer mud
    2925
    1.20
    INNOVERT NS OBM
    3078
    1.35
    Bentonite mud
    3078
    1.35
    Polymer Mud / Glycol
    3078
    1.22
    INNOVERT NS OBM
    3078
    1.22
    INNOVERT NS OBM