Give whole or part of name of wellbore, licence, field, company, discovery etc. E.g. Aker, Statfjord, 24/12, ABP21014. The main content is not searched.
Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
30/9-2 R
Type
Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
EXPLORATION
Purpose
Final classification of the wellbore.
Legal values for exploration wellbores:
WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.
Legal values for development wellbores:
OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.
Legal values for other wellbores:
SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
SCIENTIFIC (drilling according to Law of Scientific research and exploration),
STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
APPRAISAL
Status
Status for the wellbore. Legal values are:
BLOWOUT: A blowout has occurred in the well.
CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
JUNKED: The drilling operation has been terminated due to technical problems.
P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
Norsk Hydro Produksjon AS
Drill permit
The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
370-L2
Drilling facility
Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
Number of days from wellbore entry to wellbore completion.
38
Entered date
The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
01.06.1986
Completed date
Exploration wellbores from moveable facilities:
For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
07.07.1986
Plugged and abondon date
Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
07.07.1986
Release date
Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
07.07.1988
Publication date
Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
28.05.2003
Purpose - planned
Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
WILDCAT
Reentry
Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
YES
Reentry activity
Reason for reentry of the wellbore. Only relevant for exploration wellbores. Example of legal values: DRILLING, DRILLING/PLUGGING, LOGGING, PLUGGING, TESTING, TESTING/PLUGGING.
TESTING/PLUGGING
Content
For exploration wellbores, status of discovery.
Legal values:
DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment. Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER
For development wellbores, type of produced/injected fluid.
Legal values:
WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
OIL/GAS
Discovery wellbore
Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
NO
1st level with HC, age
Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
See also Norwegian Offshore Directorate bulletins.
MIDDLE JURASSIC
1st level with HC, formation
Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
See also Norwegian Offshore Directorate bulletins.
BRENT GP
Kelly bushing elevation [m]
Elevation of the rotary kelly bushing (RKB) above mean sea level.
25.0
Water depth [m]
Depth in metres betweem mean sea level and sea floor.
105.0
Total depth (MD) [m RKB]
Total measured length of wellbore from kelly bushing to total depth (driller's depth).
2830.0
Final vertical depth (TVD) [m RKB]
Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
2830.0
Maximum inclination [°]
Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
12
Bottom hole temperature [°C]
Estimated temperature at final total depth of the wellbore. Shown only for released wells.
See discription.
107
Oldest penetrated age
Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
EARLY JURASSIC
Oldest penetrated formation
Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
DRAKE FM
Geodetic datum
Reference system for coordinates. Example of legal values: ED50.
ED50
NS degrees
Geographic coordinate of the wellhead, north-south degrees.
60° 27' 53'' N
EW degrees
Geographic coordinate of the wellhead, east-west degrees.
2° 49' 13.03'' E
NS UTM [m]
Universal Transverse Mercator coordinate of the wellhead, north-south.
6703339.30
EW UTM [m]
Universal Transverse Mercator coordinate of the wellhead, east-west.
The wildcat 30/9-2 was planned as the first well on the Gamma structure in block 30/9. Well 30/6-9 had previously penetrated the structure but this well failed to encounter the oil/water contact. The primary objectives of 30/9-2 were to verify the reserve estimate for the main part of the gamma structure and penetrate the oil/water contact in the lower part of the Brent Group. Additional objectives were to obtain core material from the oil zone in the Etive Formation and perform a water injection test in this, obtain information on the quality of the reservoir in the water zone and stratigraphical information on the southern part of the Gamma structure.& The well was temporarily abandoned for about one year and then re-entered for an extended test.
Operations and results
Wildcat well 30/9-2 was spudded with the semi-submersible installation "Nortrym" on 1 April 1983 and drilled to a total depth of 2830 m in the Early Jurassic Dunlin Group. The well was drilled using water-based mud down to the 12 1/4" hole at 1715 m. The 12 1/4" hole was drilled to TD using oil based mud ("ENVIROMUL" and "IL 2832 oil" as oil base). While running the 13 3/8" casing, this got stuck at 1334 m. The casing was worked free using diesel in the mud and the casing was set at 1680 m. After drilling the 12 1/4" hole to 2203 m the drill pipe got stuck with the bit at 2170 m. Several unsuccessful attempts were made to free the pipe. The drill pipe was then backed off and the well was cemented back and sidetracked from 1482.5 m.
The Brent Group sandstones (2578-2767 m) RKB were hydrocarbon bearing down to 2737m where an oil/water contact was encountered within the Etive Formation sandstones (2698-2767m).& No additional hydrocarbon bearing reservoirs were encountered by this well. Poor hydrocarbon shows reported from Upper Cretaceous limestones were considered uninteresting. The Ness Formation (2578-2698 m) consisted of very fine to coarse-grained sandstones with interbedded shales, coals and occasional siltstones.& The Etive Formation consisted of very fine to predominantly medium grained homogeneous sandstones with pebble beds in the upper part.& The sandstones were locally micaceous and carbonaceous and contained stringers with abundant calcareous cement.& Twelve conventional cores were cut continuously from 2591 m near the top of the Ness Formation and down into the top of the Drake Formation shales at 2777 m. FMT pressure recordings and sampling were performed in the well.& Samples of oil and gas were obtained from the FMT samples at 2599.5 m (Ness Formation) and 2728 m (Etive Formation).& Samples of water/filtrate were obtained from the samples at 2639.5 m (Ness Formation) and 2755 m (Etive Formation).
The well was temporarily abandoned as an oil and gas appraisal on 12 July 1983. The well was re-entered as 30/9-2 R on 1 June 1986 for a test production. The re-entry was formally completed on 7 July, and subsequently re-classified to 30/9-T-2 for the test production.&
Testing
Four DST's were performed in the well, two in the Etive Formation (DST1 from 2738 m to 2737 m and DST2 from 2704 m to 2728 m) and two in the Ness Formation (DST3 2685 m to 2693 m and DST4 from 2595 m to 2604 m). The DST performed in the lower part of the Etive Formation was a combined production and injection test, which produced water. The other DST's produced oil and gas.
PDF