Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-12

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-12
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-12
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline:LN09M2 36056 Crossline:LN09M2 127920
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1262-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    42
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    29.07.2009
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    08.09.2009
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    08.09.2011
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    08.09.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PRE-DEVONIAN
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BASEMENT
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    107.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2055.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2055.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    80
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PRE-DEVONIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 48' 22.53'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 15' 50.77'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6518862.54
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    457482.17
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6166

  • Wellbore history
    General
    Well 16/1-12 was drilled south of the Luno Discovery on the south-western part of the Utsira High. The Luno Discovery sits in an inlier basin where well 16/1-8 Luno Discovery well proved a 275 m thick Late Triassic to Jurassic sequence, overlain by a 25 m thick Late Cretaceous chalk sequence. The purpose of the well is to prove oil-filled sediments of Late - Middle Jurassic fluvial/marine and pre-Jurassic sediments south of the established Luno sediment basin. The potential reservoir was expected from the top of the Jurassic conglomeratic sandstones to the base of the Triassic sandstones and conglomerates (TD).
    Operations and results
    Well was spudded with the semi-submersible installation Songa Dee on 29 July 2009 and drilled to TD at 2055 m in pre-Devonian Basement rock. The well was drilled with seawater and sweeps down to 603 m and with Glydril mud from 603 m to TD.
    Well 16/1-12 proved oil in weathered and faulted/fractured granitic basement beneath a thin, 20 - 30 cm, Early Cretaceous conglomerate. An oil/water contact was established at approximately 1954 m. An extensive data acquisition program was undertaken and the oil column was confirmed by oil sampling, pressure measurements and observations in both cores and sidewall cores. The weathered and fractured basement showed moderate reservoir characteristics with an average porosity of 9% and an average permeability of 1 mD. As fractured basement plays are rare on the Norwegian continental shelf, a large uncertainty applied to both reservoir properties and the lateral outline of the discovery. The latter being due to seismic image quality and to difficulties mapping the fracture/fault density.
    The first oil shows in well 16/1-12 were observed in Core 4 at 1912 m after penetrating the thin, Cretaceous age, conglomerate layer below the Cromer Knoll marls. Moderate oil shows continued throughout the remainder of the cored interval, which consisted of fractured basement rocks. In cuttings from the subsequent drilling below the cored interval oil shows were more difficult to detect, however, poor shows were reported down to 1956 m. Oil was present in both the fractures and in secondary pore spaces.
    A total of 8 conventional cores were taken in well 16/1-12. As planned, coring operations commenced at 1864 m in the Shetland Group limestones in order to core the transition into the reservoir. Mini DSTs were performed at 1922.5 m, 1946.8 m, and 1956.6 m. Test interpretation indicated permeability ranges of 2-30 mD, 5-100 mD, and approximately 700 mD respectively, for the three tests. Oil samples were obtained from the first two DSTs and water from the last.
    The well was permanently abandoned on 8 September 2009 as an oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    610.00
    2055.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1864.0
    1877.9
    [m ]
    2
    1878.5
    1904.7
    [m ]
    3
    1904.7
    1912.0
    [m ]
    4
    1912.0
    1919.4
    [m ]
    5
    1919.5
    1922.8
    [m ]
    6
    1923.0
    1925.8
    [m ]
    7
    1926.0
    1931.1
    [m ]
    8
    1931.5
    1937.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    71.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1786.0
    [m]
    DC
    LUNDIN
    1795.0
    [m]
    DC
    LUNDIN
    1804.0
    [m]
    DC
    LUNDIN
    1813.0
    [m]
    DC
    LUNDIN
    1822.0
    [m]
    DC
    LUNDIN
    1831.0
    [m]
    DC
    LUNDIN

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.41

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.22
    txt
    0.00
    txt
    0.09

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    FMI PPC MSIP GR
    1570
    2039
    MDT
    1922
    1956
    MSCT GR
    1941
    1986
    MSCT GR
    2027
    2042
    MWD LWD - GR RES PWD
    1835
    1864
    MWD LWD - GR RES PWD DIR
    131
    592
    MWD LWD - GR RES PWD DIR SON DEN
    606
    1835
    MWD LWD - GR RES PWD DIR SON NEU
    1938
    2055
    VSI GR
    84
    1981
    XPT HRLT PEX
    1826
    2042

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    212.0
    36
    216.0
    0.00
    LOT
    SURF.COND.
    20
    597.0
    26
    606.0
    1.88
    LOT
    INTERM.
    9 5/8
    1826.0
    12 1/2
    1835.0
    1.76
    LOT
    OPEN HOLE
    2055.0
    8 1/2
    2055.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    272
    1.04
    Water
    606
    1.30
    Water
    1835
    1.35
    Water
    1910
    1.20
    Water
    1933
    1.21
    Water
    2055
    1.20
    Water
    2055
    1.21
    Water

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.22