Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
22.11.2024 - 09:09
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6306/3-1 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6306/3-1 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6306/3-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Inline: INE20300-04008. Crossline: INE20300-02012
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    PGNiG Upstream Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1870-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    73
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    30.09.2021
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    11.12.2021
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    11.12.2021
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    21.04.2022
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    21.04.2022
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    31.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    241.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2384.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2384.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    4.2
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    63° 53' 8.79'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 46' 9.65'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7086375.44
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    390460.14
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    9401
  • Wellbore history

    General
    Well 6306/3-1 S was drilled to evaluate the Fat Canyon prospect on the Fr ya High south of the Fenja Field in the Norwegian Sea. The primary objective was to prove and evaluate the potential Early Cretaceous to Late Jurassic sandstone reservoir of the Fat Canyon prospect and to test if the reservoir contained economically recoverable hydrocarbons.
    Operations and results
    Wildcat well 6306/3-1 S was spudded with the semi-submersible installation Borgland Dolphin on 30 September 2021. After drilling the top 36" hole to 338 m a 9 7/8" pilot was drilled to 976 m. The pilot encountered shallow gas at 468 m and 793 m. The upper zone was killed dynamically and drained controllably. The lower zone was plugged back with cement and the pilot was opened to 26" down to 657. The 20" casing was set at 650 and drilling commenced with a 17 1/2" section and 12 1/4" section to 2365 m. Here, the 9 5/8" casing stuck before reaching the planned setting and this led to several days NPT and in the end a technical sidetrack (6306/3-1 ST2) was made with kick-off at 1076 m. This bore holed was drilled to final TD at 2384 m (2384 m TVD) in Basement rocks. The well was drilled with seawater and hi-vis pills down to 657 m, with Glydril Plus from 657 to 2100 m and with Versatec oil-based mud from 2100 m to TD.
    The target Rogn Formation reservoir was penetrated from 2318 to 2345 m and consisted of very well cemented calcareous Sandstones and sandy Limestones. The potential Early Cretaceous Lyr Formation reservoir was not present and only Claystone lithologies were encountered. There were no hydrocarbon indicators observed whilst drilling.
    Due to dry well no cores were cut, no logs were run on wire line and no wire line fluid sample was taken.
    The well was permanently abandoned on 10 December 2021 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    660.00
    2363.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD - DI
    272
    336
    LWD - DI PWD RES GR SM CAL DEN N
    1048
    2365
    LWD - ECD GR RES DI
    338
    657
    LWD - GR ECD DEN NEU RES DI SON
    338
    972
    LWD - GR ECD DI
    338
    976
    LWD - PRES RES GR DI
    657
    1048
    T2 LWD - DI RES GR SON PWD
    1076
    2104
    T2 LWD - RES GR PWD DEN CAL NEU-
    2104
    2384
    T2 LWD - SPEC DI PRO SON
    2104
    2384
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    337.8
    36
    338.2
    0.00
    INTERM.
    20
    651.5
    26
    657.0
    1.47
    FIT
    INTERM.
    13 3/8
    1041.0
    17 1/2
    1048.0
    1.71
    FIT
    INTERM.
    9 5/8
    2091.2
    12 1/4
    2100.0
    1.86
    LOT
    2365.0
    12 1/4
    2365.0
    0.00
    OPEN HOLE
    2383.8
    8 1/2
    2383.8
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    140
    1.46
    26.0
    25.0
    GlyDril Plus
    327
    1.49
    1.0
    1.0
    Spud mud
    418
    1.29
    16.0
    7.0
    GlyDrill Plus
    510
    1.47
    22.0
    40.0
    Glydril Plus
    657
    1.24
    9.0
    34.0
    Glydril Plus
    692
    1.49
    1.0
    1.0
    Kill mud
    720
    1.49
    1.0
    1.0
    Spud mud
    723
    1.37
    9.0
    34.0
    Spud mud
    775
    1.24
    21.0
    16.0
    GlyDril Plus
    802
    1.27
    18.0
    9.0
    GlyDrill Pluss
    965
    1.25
    23.0
    15.0
    Glydril Plus
    976
    1.49
    1.0
    1.0
    Kill mud
    1015
    1.25
    21.0
    14.0
    GlyDril Plus
    1041
    1.46
    23.0
    11.0
    Glydril Plus
    1048
    1.30
    22.0
    15.0
    GlyDril Plus
    1080
    1.46
    23.0
    14.0
    Glydril Plus
    2130
    1.46
    22.0
    16.0
    GlyDril Plus
    2140
    1.30
    22.0
    11.0
    Versatec OBM
    2142
    1.46
    21.0
    13.0
    GlyDril Plus
    2243
    1.29
    28.0
    14.0
    OBM Versatec
    2278
    1.46
    25.0
    16.0
    GlyDril Plus
    2300
    1.29
    29.0
    14.0
    Versatec OBM
    2335
    1.46
    24.0
    14.0
    GlyDril Plus
    2384
    1.29
    28.0
    7.0
    Versatec OBM