Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
11.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6406/3-8

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6406/3-8
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6406/3-8
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST0614Inline 1346 & St0614 Xline 2122
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Wintershall Norge ASA
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1303-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    87
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    16.05.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    10.08.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.08.2012
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    23.08.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    GARN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    29.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    303.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4216.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4138.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    21.6
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TILJE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 56' 9.31'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 56' 33.43'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7203074.63
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    402756.88
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6350

  • Wellbore history
    General
    Well 6406/3-8 was drilled on the Maria prospect located is located in the Haltenbanken area, offshore Mid Norway. The prospect area is surrounded by producing fields and discoveries; Kristin (W), Smørbukk Sør (NW), Smørbukk (NW), Heidrun (N), Midgard (E), Tyrihans (SE) and Trestakk (SW). The primary objective was to confirm petroleum in the Middle Jurassic Garn Formation, with the deeper Ile and Tilje formations as secondary objectives. Also the Cretaceous Lysing Formation was seen at potentially hydrocarbon bearing.
    Operations and results
    Wildcat well 6406/3-8 was drilled with the semi-submersible installation Songa Delta. The well was spudded on three different locations with a 9 7/8" pilot hole assembly, due to shallow gas zones at 569 m, 620 m, and 670 m. The third pilot hole was drilled to revised 20" setting depth, at 545 m. Technical problems with lost circulation in the 14 3/4"x 17 1/2" hole led to a sidetrack at 1727 m (6406/3-8 T2) from the 16" liner shoe around the problem section, and back to the planned trajectory towards the end of the 12 1/4" section. This gave significant deviation from the vertical trajectory. The well was drilled to 4216 m (4138 m TVD) in the Early Jurassic Tilje Formation. The well was drilled with sea water down to 541 m and with Carbo-Sea oil based mud from 541 m to TD.
    The Lysing Formation was found tight and water bearing. Clear hydrocarbon shows and increased gas values were observed when penetrating the Middle Jurassic Garn Formation at 3841 m (3771 m TVD). Based on log and pressure data an OWC was established at 3907 m (3837 m TVD) giving an oil column of 66 m TVD in the well. No gas cap was observed. Two parallel oil gradients of 0.66 g/cc with a separation of 0.4 Bar was established in the Garn Formation and a clear water gradient of 0.982 g/cc in the lower part of Garn Formation was encountered. The Garn Formation sandstones had an average porosity of 14.5 % with porosity cut off of 10 % and Vclay cut-off of 50 %. The secondary targets, Ile and Tilje Formations, were water bearing.
    Two cores were cut from 3846 to 3929.6 m in the Garn Formation with 100% core recovery. The sandstones had an average porosity of 14.5 % when using a 10% cut off. The second core was water wet in the bottom after coring through the OWC. The upper 5 m of the Garn Formation was missed in the process of picking the coring point, and a sidewall coring run was performed to compensate for this. Oil and water samples were collected from the Garn Fm, both with conventional RCI probe and with the RCI straddle packer as part of the mini DST program. The fluid samples were taken at 3842.01 m (oil), 3843.5 m (oil), 3852 m (oil), 3873.5 m (oil), 3877.53 m (oil), 3896.12 m (oil), 3900 m (oil), and 3920 m (water). The samples were variably contaminated by the OBM in the C13 to C20 alkane range. The oil gravity was measured to 36.4 deg API with a GOR of 170 Sm3/Sm3.
    The well was permanently abandoned on 10 August 2010 as an oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    550.00
    2280.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3846.0
    3873.9
    [m ]
    2
    3874.0
    3929.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    83.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.26

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MMWD LWD - GR RES DIR SON
    1698
    2280
    MWD LWD - GR RES DIR
    332
    1698
    MWD LWD - GR RES DIR
    1654
    2312
    MWD LWD - NB GR RES DIR CAL DEN
    2312
    4216
    MWD LWD - NEU SONIC
    2312
    4216
    QUAD COMBO
    3759
    4186
    RCI
    3842
    4182
    RCI MINI-DST-VIT-SAMPLE
    3843
    3890
    SWC
    3840
    3847
    VSP
    1700
    4210

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    397.0
    36
    398.0
    0.00
    LOT
    SURF.COND.
    20
    541.0
    26
    544.0
    0.00
    LOT
    PILOT HOLE
    545.0
    9 5/8
    545.0
    0.00
    LOT
    LINER
    16
    1692.0
    20
    1698.0
    0.00
    LOT
    INTERM.
    13 3/8
    2280.0
    17 1/2
    2327.0
    0.00
    LOT
    INTERM.
    9 5/8
    3803.0
    12 1/4
    3805.0
    0.00
    LOT
    OPEN HOLE
    4216.0
    8 1/2
    4216.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    368
    1.06
    SPUD MUD
    544
    1.07
    SPUD MUD
    672
    1.21
    14.0
    AQUACOL KCL/POLYMER/GLYCOL
    1277
    1.26
    16.0
    AQUACOL KCL/POLYMER/GLYCOL
    1654
    1.60
    34.0
    CARBO TECH
    1694
    1.27
    18.0
    AQUACOL KCL/POLYMER/GLYCOL
    1700
    1.31
    17.0
    AQUACOL KCL/POLYMER/GLYCOL
    1808
    1.60
    45.0
    CARBO TECH
    1918
    1.67
    48.0
    CARBO TECH
    1964
    1.33
    19.0
    AQUACOL KCL/POLYMER/GLYCOL
    2054
    1.63
    47.0
    CARBO TECH
    2135
    1.33
    20.0
    AQUACOL KCL/POLYMER/GLYCOL
    2180
    1.63
    55.0
    CARBO TECH
    2280
    1.67
    49.0
    CARBO TECH
    2327
    1.63
    52.0
    CARBO TECH
    2828
    1.72
    52.0
    CARBO TECH
    3647
    1.22
    5.7
    CARBO TECH
    3805
    1.72
    50.0
    CARBO TECH
    3846
    1.20
    17.0
    CARBO TECH
    3928
    1.23
    20.0
    CARBO TECH
    3997
    1.20
    21.0
    CARBO TECH
    4216
    1.21
    22.0
    CARBO TECH

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.27