Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/7-5 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/7-5 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/7-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    CN 8502 - 599 SP. 225
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Conoco Norway Inc.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    505-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    31
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    06.03.1986
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.04.1986
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    05.04.1988
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    17.09.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    FANGST GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BÅT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    331.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2673.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2525.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    30.9
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    63
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TILJE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 21' 30.27'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 17' 35.08'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7249656.78
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    420590.94
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    860

  • Wellbore history
    General
    Well 6507/7-5 A is located on the northern part of the Halten Terrace off shore Mid Norway and was drilled to appraise the northern extension of the 6507/7-2 Heidrun Discovery. Well 6507/7-5 A was drilled as a geological sidetrack from the 6507/7-5 well to further evaluate and appraise the Middle and Lower Jurassic sands in a downthrown fault block adjacent to, and NNW of the one tested by the 6507/7-5 well. Prognosed TD was at 2721 m MD RKB.
    Operations and results
    Appraisal well 6507/7-5 A was spudded the semi-submersible installation Nortrym on 6 March 1986. The well was drilled deviated from 6507/7-5 with kick-off point at 1100 m in the 6507/7-5 well and reached its TD at 2673 m in the Early Jurassic Tilje Formation. TD location was approximately 640 m NNW from the top hole location. No shallow gas was recorded during drilling. Due to technical problems, prognosed depth was not reached. The drill string became differentially stuck during a connection 9 m off bottom. After 7 days of fishing, the string was backed off, leaving a 387 m fish in the hole. Hence there were no final logs run on this well. Two days were spent waiting for weather. The well was drilled with KCl/polymer mud from kick-off to TD.
    The well proved an even longer hiatus in this well than in well 6507/7-5: from the Late Cretaceous Turonian to the Middle Jurassic Aalenian/Bajocian. Hence, no Late Jurassic sediments were encountered. The Fangst Group, Garn Formation, came in at 2554.5 m (2420.6 m TVD RKB) and the Båt Group at 2582.5 m (2445.2 m TVD), with top Tilje Formation at 2598.0 m (2458.8 m TVD). Analysis of cores indicated good to excellent porosity and permeability with shows.
    Poor to moderate shows occurred in siltstone and sandstone samples from the Cretaceous between 2300 and down to top Jurassic. In the Fangst Group oil shows appeared first at 2560 m, ca 3 m down from the top of core no 1 and 5 m below top Garn Formation. A transitional zone of increasingly strong oil shows followed down to 2563 m from where good shows persisted down to 2629 m ca 13 m TVD into the Tilje Formation. An oil-down-to contact was thus indicated at this level, supported by logs. However, since no RFT was run and occasional oil shows were observed in sandstone and siltstone fragments down to TD the hydrocarbon contact remained unclear.
    Coring commenced at 2557 m, and 6 cores were cut in the interval 2557 - 2629.6 m. No fluid samples were taken on wire line.
    The well was permanently abandoned on 5 April 1986 as a dry well. The well was plugged and abandoned as an oil and gas appraisal, with possible communication between the Fangst and Båt Groups.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1100.00
    2668.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2557.0
    2568.8
    [m ]
    2
    2572.0
    2572.9
    [m ]
    3
    2573.0
    2592.3
    [m ]
    4
    2595.0
    2610.1
    [m ]
    5
    2611.7
    2622.5
    [m ]
    6
    2622.5
    2629.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    65.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    356
    1491
    1966
    1966
    2083
    2083
    2117
    2188
    2555
    2583
    2598

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    8.03
    pdf
    1.42

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    HRT CCL
    355
    2160
    ISF BHC GR SP
    2186
    2569
    ISF SLS MSFL GR
    1032
    2432
    ISF SLS MSFL GR
    1032
    2196
    MWD - GR RES DIR
    1434
    2673

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    SURF.COND.
    20
    1033.0
    26
    1098.0
    1.58
    LOT
    INTERM.
    13 3/8
    2189.0
    17 1/2
    2201.0
    1.69
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1098
    1.38
    33.5
    622.4
    WATER BASED
    07.03.1986
    1110
    1.38
    33.5
    622.4
    WATER BASED
    09.03.1986
    1498
    1.39
    73.5
    622.4
    WATER BASED
    11.03.1986
    1916
    1.42
    73.5
    622.4
    WATER BASED
    12.03.1986
    2051
    1.39
    73.5
    622.4
    WATER BASED
    17.03.1986
    2198
    1.40
    73.5
    622.4
    WATER BASED
    17.03.1986
    2201
    1.27
    73.5
    622.4
    WATER BASED
    15.03.1986
    2478
    1.27
    73.5
    622.4
    WATER BASED
    19.03.1986
    2572
    1.30
    26.0
    21.0
    WATER BASED
    21.03.1986
    2634
    1.30
    22.0
    18.0
    WATER BASED
    24.03.1986
    2673
    1.33
    18.0
    22.0
    WATER BASED
    24.03.1986
    2673
    1.03
    18.0
    23.0
    WATER BASED
    08.04.1986