7220/11-2 A
Export: PDF
-
General information
-
Wellbore history
GeneralWell 7220/11-2 A is a geological sidetrack to well 7220/11-2. Both wells were drilled to appraise the 7220/11-1 Alta discovery. The main well found gas in Early Triassic sandstones and conglomerate, but no producible oil due to tight formation in the lower part of the reservoir. The objective of 7220/11-2 A was to investigate reservoir quality and confirm the presence of an oil leg on the western flank of the Alta structure.Operations and resultsAppraisal well 7220/11-2 A was kicked off at 635 m in the main well on 3 May 2015. It was drilled with the semi-submersible installation Island Innovator to TD at 2121 m (2071 m TVD) in basement rocks. No significant problem was encountered in the operations. The well was drilled with Aquadril mud from kick-off to TD.Top of the target reservoir was encountered at 1951.8 m (1901.7 m TVD). The reservoir consists of Early Triassic sandstone and conglomerates, similar as in the main well. The reservoir was oil and gas bearing. The contacts in the 7220/11-1 discovery well were not confirmed; however, pressure points indicated a common fluid system with the main well and with 7220/11-1. The thickness of the reservoir is 102 m TVD, ca 13 m thicker than in the main well. Between base reservoir and top basement, well 7220/11-2 A penetrated a 14 m thick sequence with marl, claystone and dolomite, possibly belonging to the Gipsdalen Group. Oil shows were similar as in the main well bore: on siltstone and sandstones from top Toscana Group to top reservoir, throughout the reservoir, and down to 2079 m in the basement.Six conventional cores were cut in the interval 1926.6 to 2048.66 m (125.9 m). Recovery for core 1 was 99%, for the remaining cores recovery was 100%. The core-log depth shift is -2.19 m for all cores. MDT fluid samples were taken at 1967.15 m (oil), 1989.71 m (oil), 2008.72 m (water), and 2030.11 m (water)The well was permanently abandoned on 14 June 2015 as an oil and gas appraisal well.TestingA production test was performed from the interval 1965.2 to 1997.37 m. The test produced 136 Sm3 oil and 18500 Sm3 gas /day through a 24/64" choke in the main flow. The flowing temperature was 68.8 °C, measured at 1952.6 m. -
Cuttings at the Norwegian Offshore Directorate
Cuttings at the Norwegian Offshore Directorate Cuttings available for sampling?YESCuttings at the Norwegian Offshore Directorate Cutting sample, top depth [m]Cutting samples, bottom depth [m]620.002121.00 -
Cores at the Norwegian Offshore Directorate
Cores at the Norwegian Offshore Directorate Core sample numberCore sample - top depthCore sample - bottom depthCore sample depth - uom11926.61936.4[m ]21936.51937.8[m ]31937.81965.6[m ]41965.61993.6[m ]51993.62021.1[m ]62021.12048.6[m ]Cores at the Norwegian Offshore Directorate Total core sample length [m]121.9Cores at the Norwegian Offshore Directorate Cores available for sampling?YES -
Oil samples at the Norwegian Offshore Directorate
Oil samples at the Norwegian Offshore Directorate Test typeBottle numberTop depth
MD [m]Bottom depth
MD [m]Fluid typeTest timeSamples availableMDT0.000.00OIL04.06.2015 - 00:00YESMDT0.000.00OIL04.06.2015 - 00:00YES -
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit4094094654655875876236231927192719521952205420542068 -
Drill stem tests (DST)
Drill stem tests (DST) Test numberFrom depth MD
[m]To depth MD
[m]Choke size
[mm]1.0196519979.5Drill stem tests (DST) Test numberFinal shut-in pressure
[MPa]Final flow pressure
[MPa]Bottom hole pressure
[MPa]Downhole temperature
[°C]1.0Drill stem tests (DST) Test numberOil
[Sm3/day]Gas
[Sm3/day]Oil density
[g/cm3]Gas grav. rel.airGOR
[m3/m3]1.013624000141 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]CMR XPT ADT19112110FMI MSIP4092119MDT19282052MWD - BR GR REMP BHPR MECH AAC5661222MWD - GR BHPR MECH409465MWD - GR REMP BHPR MECH DEN NEU11582121MWD - GR REMP BHPR MECH AAC456598UBI PEX HRLA HNGS NEXT18512113USIT17902120 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30476.036479.00.00SURF.COND.20591.326599.01.57FITPILOT HOLE601.09 7/8601.00.00INTERM.13 3/81215.217 1/21222.01.80FITINTERM.9 5/81853.012 1/41860.01.68LOTLINER72120.08 1/22121.00.00 -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured10261.2323.0Water Based12221.2519.0Water Based14941.2311.0Water Based17291.2316.0Water Based18651.159.0Water Based19381.1512.0Water Based21201.141.0Water Based21211.1515.0Water Based