Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7220/8-3

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7220/8-3
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    PLUGGED
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7220/8-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    CGG19002. Inline: 9752. Xline 11412
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Equinor Energy AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1889-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    17
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    16.04.2022
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.06.2022
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    07.06.2022
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.06.2024
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    07.06.2024
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    STØ FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    32.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    352.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1309.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1309.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    38
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    FRUHOLMEN FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    72° 26' 57.36'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    20° 20' 32.88'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    8047256.44
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    679610.52
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    33
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    9551
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    700.00
    1308.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    936.6
    950.9
    [m ]
    2
    951.1
    996.3
    [m ]
    3
    996.3
    1041.4
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    104.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    700.0
    [m]
    DC
    CGG
    710.0
    [m]
    DC
    CGG
    720.0
    [m]
    DC
    CGG
    730.0
    [m]
    DC
    CGG
    740.0
    [m]
    DC
    CGG
    750.0
    [m]
    DC
    CGG
    760.0
    [m]
    DC
    CGG
    770.0
    [m]
    DC
    CGG
    780.0
    [m]
    DC
    CGG
    790.0
    [m]
    DC
    CGG
    800.0
    [m]
    DC
    CGG
    810.0
    [m]
    DC
    CGG
    820.0
    [m]
    DC
    CGG
    830.0
    [m]
    DC
    CGG
    840.0
    [m]
    DC
    CGG
    850.0
    [m]
    DC
    CGG
    860.0
    [m]
    DC
    CGG
    870.0
    [m]
    DC
    CGG
    880.0
    [m]
    DC
    CGG
    890.0
    [m]
    DC
    CGG
    900.0
    [m]
    DC
    CGG
    910.0
    [m]
    DC
    CGG
    917.8
    [m]
    C
    CGG
    923.0
    [m]
    DC
    CGG
    926.0
    [m]
    DC
    CGG
    929.0
    [m]
    DC
    CGG
    932.0
    [m]
    DC
    CGG
    933.6
    [m]
    C
    CGG
    935.0
    [m]
    DC
    CGG
    936.7
    [m]
    C
    CGG
    938.0
    [m]
    DC
    CGG
    940.8
    [m]
    C
    CGG
    944.9
    [m]
    C
    CGG
    947.7
    [m]
    C
    CGG
    951.4
    [m]
    C
    CGG
    955.8
    [m]
    C
    CGG
    960.7
    [m]
    C
    CGG
    966.9
    [m]
    C
    CGG
    970.3
    [m]
    C
    CGG
    973.9
    [m]
    C
    CGG
    975.4
    [m]
    C
    CGG
    979.9
    [m]
    C
    CGG
    984.6
    [m]
    C
    CGG
    988.9
    [m]
    C
    CGG
    993.9
    [m]
    C
    CGG
    998.7
    [m]
    C
    CGG
    1001.7
    [m]
    C
    CGG
    1005.3
    [m]
    C
    CGG
    1008.4
    [m]
    C
    CGG
    1013.7
    [m]
    C
    CGG
    1015.7
    [m]
    C
    CGG
    1017.4
    [m]
    C
    CGG
    1021.5
    [m]
    C
    CGG
    1024.2
    [m]
    C
    CGG
    1028.4
    [m]
    C
    CGG
    1031.3
    [m]
    C
    CGG
    1034.5
    [m]
    C
    CGG
    1036.5
    [m]
    C
    CGG
    1038.8
    [m]
    C
    CGG
    1041.1
    [m]
    C
    CGG
    1043.0
    [m]
    DC
    CGG
    1049.0
    [m]
    DC
    CGG
    1055.0
    [m]
    DC
    CGG
    1061.0
    [m]
    DC
    CGG
    1067.0
    [m]
    DC
    CGG
    1073.0
    [m]
    DC
    CGG
    1079.0
    [m]
    DC
    CGG
    1085.0
    [m]
    DC
    CGG
    1091.0
    [m]
    DC
    CGG
    1097.0
    [m]
    DC
    CGG
    1103.0
    [m]
    DC
    CGG
    1109.0
    [m]
    DC
    CGG
    1115.0
    [m]
    DC
    CGG
    1121.0
    [m]
    DC
    CGG
    1127.0
    [m]
    DC
    CGG
    1133.0
    [m]
    DC
    CGG
    1139.0
    [m]
    DC
    CGG
    1145.0
    [m]
    DC
    CGG
    1151.0
    [m]
    DC
    CGG
    1157.0
    [m]
    DC
    CGG
    1163.0
    [m]
    DC
    CGG
    1169.0
    [m]
    DC
    CGG
    1175.0
    [m]
    DC
    CGG
    1181.0
    [m]
    DC
    CGG
    1187.0
    [m]
    DC
    CGG
    1193.0
    [m]
    DC
    CGG
    1199.0
    [m]
    DC
    CGG
    1205.0
    [m]
    DC
    CGG
    1211.0
    [m]
    DC
    CGG
    1217.0
    [m]
    DC
    CGG
    1223.0
    [m]
    DC
    CGG
    1229.0
    [m]
    DC
    CGG
    1235.0
    [m]
    DC
    CGG
    1241.0
    [m]
    DC
    CGG
    1247.0
    [m]
    DC
    CGG
    1253.0
    [m]
    DC
    CGG
    1259.0
    [m]
    DC
    CGG
    1265.0
    [m]
    DC
    CGG
    1271.0
    [m]
    DC
    CGG
    1277.0
    [m]
    DC
    CGG
    1283.0
    [m]
    DC
    CGG
    1289.0
    [m]
    DC
    CGG
    1295.0
    [m]
    DC
    CGG
    1301.0
    [m]
    DC
    CGG
    1307.0
    [m]
    DC
    CGG
    1308.7
    [m]
    C
    CGG
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    IBC CBL
    540
    917
    MDT
    936
    1277
    MWD - DGR EWR PWD PCDC WDP
    405
    695
    MWD - GP AFR DGR ADR DIR PWD PCD
    918
    1309
    MWD - IC DGR EWR PWD DIR PCDC WD
    695
    918
    NEXT XPT CMR
    917
    1310
    NGI MSIP PEX AIT
    540
    1290
    XLR
    923
    1269
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    396.0
    30
    396.0
    0.00
    INTERM.
    405.0
    24
    405.0
    0.00
    INTERM.
    13 3/8
    688.2
    17 1/2
    695.0
    1.25
    FIT
    LINER
    9 5/8
    917.0
    12 1/4
    918.0
    1.50
    FIT
    OPEN HOLE
    1309.0
    8 1/2
    1309.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    656
    1.05
    11.0
    8.0
    Innovert
    840
    1.12
    16.0
    11.5
    Innovert
    918
    1.12
    14.0
    12.0
    Innovert
    936
    1.13
    16.0
    11.5
    Innovert
    1041
    1.13
    15.0
    13.0
    Innovert
    1309
    1.12
    15.0
    11.5
    Innovert