Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

1/3-9 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/3-9 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    RE-CLASS TO DEV
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/3-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    BPNHR97-13 X-OVER BPNHR97-22
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    BP Norway Limited U.A.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    928-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    85
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    08.05.1998
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    31.07.1998
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    31.07.2000
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    30.04.2010
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reclassified to wellbore
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ULA FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    68.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4516.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4359.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    25.9
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    168
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ULA FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 58' 57.93'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 57' 31.44'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6315608.87
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    497491.85
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3362

  • Wellbore history
    General
    Well 1/3-9 S is located on the Tambar Field on the Cod Terrace in the North Sea. The objective was to appraise the possibility of commercial quantities of hydrocarbons in the Ula Formation sandstones of the JU8 prospect (the Ula Formation is sometimes referred to as the "Gyda Sandstone Member" in this part of the North Sea). The well was planned deviated to avoid shallow gas anomalies and to fully appraise the target sand.
    Operations and results
    Well 1/3-9 S was spudded with the semi-submersible installation Mærsk Jutlander on 8 May 1998 and drilled to 3100 m where hole problems led to plug-back and a sidetrack (1/3-9 S T2) with kick-off at 1836 m. Final TD of the well was set at 4516 m in the Late Jurassic Ula Formation. The well was drilled with seawater and hi-vis pills down to 1050 m, with Barasilc WBM from 1050 m to 3185 m, and with Enviromul OBM from 3185 m to TD. Total Non-Productive time for the well was 40%, most of which was due to contamination of the mud system, the side-track of the well and the TD logging performance. The 12 1/4" Section was notably different from plan, after an unexpected water kick was taken at 2535 m. This not only reduced the mud systems ability to accept contaminants, with a required MW increase up to 1.7sg, but also severely reduced the ROP, due to high overbalance drilling, later in the section. This also resulted in setting the 9 5/8" casing high, leaving reactive shales open whilst drilling the 8 1/2" section.
    The Palaeocene Forties sands of the 1/3-6 and 1/3-7 wells were not encountered. The target Ula Formation sandstone was encountered at 4266.3 m, 33.7 m high to prognosis. It was oil-bearing with an estimated OWC at ca 4375 m. Oil shows, both fluorescence in cuttings samples and drilled gas with the compositional range of C1 - C5, were observed through the interval 4273 - 4377 m, within this unit. No other shows were recorded in the well. Analysis of MDT pressure revealed a 550 psi difference compared to well 1/3-3 and Gyda well 2/1-6. This is interpreted as being a result of depletion from Gyda oil production, and suggests there is significant communication through the aquifer between the JU8 structure and the Gyda Field.
    A total of 105 m of core was cut in two cores in the Ula Formation. A total recovery of 99.7% was obtained, representing the two longest core recoveries in the area. MDT oil samples were taken at 4279.5 m, 4304.98 m, and at 4346.49 m. Following extensive logging of the well, a 7" liner was run in preparation for future development. The well was temporarily suspended on 31 July 1998, with a combined trawl guard and corrosion cap left on top. In June 2001 it was re-entered and reclassified to development well on the Tambar and Tambar Øst Fields.
    Well 1/3-9 S is classified as an appraisal of the 1/3-3 Tambar Discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1070.00
    3100.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4273.0
    4322.7
    [m ]
    2
    4323.0
    4378.1
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    104.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 4273-4278m
    Core photo at depth: 4278-4283m
    Core photo at depth: 4283-4288m
    Core photo at depth: 4288-4293m
    Core photo at depth: 4293-4298m
    4273-4278m
    4278-4283m
    4283-4288m
    4288-4293m
    4293-4298m
    Core photo at depth: 4298-4303m
    Core photo at depth: 4303-4308m
    Core photo at depth: 4308-4313m
    Core photo at depth: 4313-4318m
    Core photo at depth: 4318-4322m
    4298-4303m
    4303-4308m
    4308-4313m
    4313-4318m
    4318-4322m
    Core photo at depth: 4323-4328m
    Core photo at depth: 4328-4333m
    Core photo at depth: 4333-4338m
    Core photo at depth: 4338-4343m
    Core photo at depth: 4343-4348m
    4323-4328m
    4328-4333m
    4333-4338m
    4338-4343m
    4343-4348m
    Core photo at depth: 4348-4353m
    Core photo at depth: 4353-4358m
    Core photo at depth: 4358-4363m
    Core photo at depth: 4368-4373m
    Core photo at depth: 4373-4378m
    4348-4353m
    4353-4358m
    4358-4363m
    4368-4373m
    4373-4378m
    Core photo at depth: 4378-4378m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    4378-4378m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    4274.2
    [m]
    C
    APT
    4274.4
    [m]
    C
    APT
    4275.4
    [m]
    C
    APT
    4277.5
    [m]
    C
    APT
    4287.3
    [m]
    C
    APT
    4289.4
    [m]
    C
    APT
    4289.5
    [m]
    C
    APT
    4309.7
    [m]
    C
    APT
    4322.8
    [m]
    C
    APT
    4325.7
    [m]
    C
    APT
    4328.0
    [m]
    C
    APT
    4331.5
    [m]
    C
    APT
    4334.9
    [m]
    C
    APT
    4338.6
    [m]
    C
    APT
    4375.0
    [m]
    C
    APT
    4376.0
    [m]
    C
    APT
    4376.0
    [m]
    C
    APT
    4378.0
    [m]
    C
    APT
    4378.0
    [m]
    C
    APT

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.44
    pdf
    2.49
    pdf
    0.12

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    2.39
    .pdf
    31.90

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CSAT GR
    1050
    4518
    CSAT GR
    3106
    4518
    DSI IPL
    3157
    4518
    MDT GR
    4266
    4308
    MDT GR
    4266
    4396
    MDT GR
    4278
    4395
    PI GR
    3150
    4518

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    159.0
    36
    165.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1042.0
    17 1/2
    1050.0
    1.98
    LOT
    PILOT HOLE
    1050.0
    9 7/8
    0.0
    0.00
    LOT
    INTERM.
    9 5/8
    3180.0
    12 1/4
    3185.0
    1.90
    LOT
    LINER
    7
    4514.0
    8 1/2
    4516.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    160
    1.03
    1.0
    WATERBASED
    501
    1.03
    1.0
    WATERBASED
    1050
    1.25
    1.0
    WATER BASED MUD
    1658
    1.30
    16.0
    WATER BASED MUD
    1920
    1.70
    25.0
    WATER BASED MUD
    2180
    1.70
    26.0
    WATER BASED MUD
    2293
    1.70
    26.0
    WATER BASED MUD
    2348
    1.70
    26.0
    WATER BASED MUD
    2515
    1.70
    24.0
    WATER BASED MUD
    2932
    1.67
    45.0
    WATER BASED MUD
    2935
    1.70
    26.0
    WATER BASED MUD
    3087
    1.70
    30.0
    WATER BASED MUD
    3100
    1.67
    36.0
    WATER BASED MUD
    3185
    1.70
    27.0
    WATER BASED MUD
    3185
    1.70
    27.0
    WATER BASED MUD
    3466
    1.54
    29.0
    OIL BASED MUD
    3573
    1.54
    28.0
    OIL BASED MUD
    4042
    1.54
    30.0
    OIL BASED MUD
    4100
    1.54
    29.0
    OIL BASED MUD
    4253
    1.54
    32.0
    OIL BASED MUD
    4323
    1.54
    26.0
    OIL BASED MUD
    4377
    1.54
    30.0
    OIL BASED MUD
    4493
    1.54
    31.0
    OIL BASED MUD
    4516
    1.54
    30.0
    OIL BASED MUD

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21