Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6407/3-2 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/3-2 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/3-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    PGS14005. inline: 11658. x-line: 5437
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Equinor Energy AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1775-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    31
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    06.08.2019
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.09.2019
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    05.09.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.04.2020
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.02.2020
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    31.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    237.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2628.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2590.0
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ÅRE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 45' 25.69'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 49' 35.47'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7182084.60
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    444160.30
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8816
  • Wellbore history

    General
    Well 6407/3-2 S was drilled to test the Lanterna prospect, located on the Trøndelag Platform, west of the Mikkel Discovery in the Norwegian Sea. The primary objective was to test migration of hydrocarbons into the prospect, and to prove hydrocarbons in the Garn, Tilje and upper Åre formations. Secondary objective was to test the hydrocarbon potential in the Lower Åre Formation and the Triassic Grey Beds.
    Operations and results
    Wildcat well 6407/3-2 S was spudded with the semi-submersible installation West Hercules on 6 August 2019 and drilled to TD at 2628 m (2589.4 m TVD) m in the Early Jurassic Åre Formation. An 8 ½” pilot well was drilled after the 42” from 320 to 477 m. The pilot hole observed gas bubbles at approximately 477 m. The flow was stopped with 1.60 sg kill-mud. After evaluating the situation and performing required measures to handle the situation, drilling continued as planned. Otherwise operations proceeded without significant problems. The well was drilled with seawater down to 435 m and with Glydril mud from 435 m to TD.
    A 41 m TVD thick Spekk Formation was penetrated above top Garn Formation, which was encountered at 2000 m (1983 m TVD). The Garn Formation contains a thick reservoir sandstone interval with an interbedded siltstone body and limestone stringers. The underlying Not Formation is predominantly clay and siltstone, while the Ile Formation consists of alternating sand and siltstone with traces of claystone and limestone. The Tilje Formation was encountered at 2314 m (2286 m TVD) and consisted of interbedded bodies of sandstone, siltstone, and claystone. The Åre Formation was encountered at 2430 m (2398 m TVD) and consists of interbedded bodies of sandstone, siltstone, and claystone with coals in the lower part.
    All reservoirs were water-bearing. No hydrocarbon indications were seen on the logs and no shows were seen on the cuttings and the gas levels were quite low in general throughout the well.
    No cores were cut. No fluid sample was taken.
    Due to dry well and lack of shows TD was set above the Triassic.
    The well was permanently abandoned on 5 September 2019 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    440.00
    2628.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    HRLA PEX XPT SS XPT
    1911
    2628
    MWD LWD - ARC TELE
    320
    435
    MWD LWD - PD ARC TELE
    268
    320
    MWD LWD - PD ARC TELE
    435
    1305
    MWD LWD - PDO ARC TELE
    1305
    1911
    MWD LWD - PDO GVR ARC TELE GEO
    1911
    2628
    XPT
    1911
    2628
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    317.0
    42
    320.0
    0.00
    SURF.COND.
    20
    431.0
    26
    435.0
    1.46
    FIT
    INTERM.
    13 3/8
    1300.0
    16
    1305.0
    1.67
    FIT
    LINER
    9 5/8
    1891.0
    12 1/4
    1911.0
    1.51
    FIT
    OPEN HOLE
    2628.0
    8 1/2
    2628.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    320
    1.30
    20.0
    CMC Spud
    320
    1.60
    18.0
    CMC Spud
    434
    1.30
    25.0
    CMC Spud
    435
    1.11
    8.0
    Glydril
    477
    1.60
    20.0
    CMC Spud
    510
    1.12
    8.0
    Glydril
    719
    1.13
    8.0
    Glydril
    950
    1.17
    10.0
    Glydril
    1070
    1.18
    10.0
    Glydril
    1257
    1.21
    11.0
    Glydril
    1305
    1.21
    11.0
    Glydril
    1305
    1.49
    15.0
    Glydril
    1323
    1.50
    19.0
    Glydril
    1911
    1.25
    11.0
    Glydril
    1911
    1.50
    23.0
    Glydril
    2628
    1.28
    16.0
    Glydril
    2628
    1.21
    15.0
    Glydril