Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
26.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/11-14

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/11-14
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/11-14
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    MC3D-NVG05STZ12-PSDM-KIR-FULLSTK-FIN-D In-line 1592 X-line: 2593
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1626-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    30
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    07.06.2016
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    06.07.2016
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    06.07.2018
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    06.07.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    TARBERT FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    29.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    107.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3467.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3466.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    125
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    DRAKE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 11' 29.91'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 35' 11.08'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6672982.46
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    477063.48
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7982

  • Wellbore history
    General
    Well 30/11-14 was drilled to test the Slemmestad prospect on the eastern flank of the Fensal Sub-basin in the North Sea. The well is located 6 km southeast of the 30/11-8 S (Krafla) discovery and 25 km southwest of the Oseberg Sør facility in the North Sea. The primary exploration target was to prove petroleum in the Middle Jurassic Tarbert Formation. The secondary exploration target was to prove petroleum in the Middle Jurassic Ness Formation.
    Operations and results
    Wildcat well 30/11-14 was spudded with the semi-submersible installation Songa Delta on 7 June 2016 and drilled to TD at 3467 m in the Early Jurassic Drake Formation. No significant problem was encountered in the operations. The well was drilled with seawater, sweeps and bentonite PAD down to 1638 m and with XP-07 oil based mud from 1638 m to TD.
    The Tarbert Formation came in at 2957 m. G as was encountered in two intervals in the upper Tarbert Formation: from 2957 to a GWC at 2978 m and from 3030 to a GWC at 3035 m. Based on the logs, gas response was seen in the Ness Formation, mostly related to coal beds. No oil shows were seen on cuttings. On cores, spotted direct and cut fluorescence were seen at 2981 to 2987 m, 3036 to 3039 m and at 3087 to 3088 m.
    Two cores were cut in succession from 2952 to 3166 m. Of this 209.6 m was recovered (97.9% recovery). MDT water samples were taken at 751.8 m in the Utsira Formation and 905.8 m in the Skade Formation. These samples were taken in an 8 1/2" pilot hole drilled from the 20'' shoe down to 979 m. Further MDT samples were taken at 2981.9 m (water), 2959.4 m (gas), and 3033.6 m (gas).
    The well was plugged back for sidetracking on 6 July 2016. It is classified as a gas/condensate discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    480.00
    3467.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2952.0
    3053.4
    [m ]
    2
    3061.0
    3166.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    206.7
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    490.0
    [m]
    DC
    PETROSTR
    520.0
    [m]
    DC
    PETROS
    550.0
    [m]
    DC
    PETROS
    580.0
    [m]
    DC
    PETROS
    610.0
    [m]
    DC
    PETROS
    640.0
    [m]
    DC
    PETROS
    690.0
    [m]
    DC
    PETROS
    720.0
    [m]
    DC
    PETROS
    750.0
    [m]
    DC
    PETROS
    780.0
    [m]
    DC
    PETROS
    810.0
    [m]
    DC
    PETROS
    840.0
    [m]
    DC
    PETROS
    870.0
    [m]
    DC
    PETROS
    900.0
    [m]
    DC
    PETROS
    930.0
    [m]
    DC
    PETROS
    960.0
    [m]
    DC
    PETROS
    990.0
    [m]
    DC
    PETROS
    1020.0
    [m]
    DC
    PETROS
    1050.0
    [m]
    DC
    PETROS
    1080.0
    [m]
    DC
    PETROS
    1110.0
    [m]
    DC
    PETROS
    1140.0
    [m]
    DC
    PETROS
    1170.0
    [m]
    DC
    PETROS
    1200.0
    [m]
    DC
    PETROS
    1230.0
    [m]
    DC
    PETROS
    1260.0
    [m]
    DC
    PETROS
    1290.0
    [m]
    DC
    PETROS
    1320.0
    [m]
    DC
    PETROS
    1350.0
    [m]
    DC
    PETROS
    1380.0
    [m]
    DC
    PETROS
    1410.0
    [m]
    DC
    PETROS
    1440.0
    [m]
    DC
    PETROS
    1470.0
    [m]
    DC
    PETROS
    1500.0
    [m]
    DC
    PETROS
    1530.0
    [m]
    DC
    PETROS
    1560.0
    [m]
    DC
    PETROS
    1590.0
    [m]
    DC
    PETROS
    1620.0
    [m]
    DC
    PETROS
    1650.0
    [m]
    DC
    PETROS
    1680.0
    [m]
    DC
    PETROS
    1710.0
    [m]
    DC
    PETROS
    1740.0
    [m]
    DC
    PETROS
    1770.0
    [m]
    DC
    PETROS
    1800.0
    [m]
    DC
    PETROS
    1830.0
    [m]
    DC
    PETROS
    1860.0
    [m]
    DC
    PETROS
    1890.0
    [m]
    DC
    PETROS
    1920.0
    [m]
    DC
    PETROS
    1950.0
    [m]
    DC
    PETROS
    1980.0
    [m]
    DC
    PETROS
    2010.0
    [m]
    DC
    PETROS
    2040.0
    [m]
    DC
    PETROS
    2070.0
    [m]
    DC
    PETROS
    2110.0
    [m]
    DC
    PETROS
    2130.0
    [m]
    DC
    PETROS
    2150.0
    [m]
    DC
    PETROS
    2170.0
    [m]
    DC
    PETROS
    2190.0
    [m]
    DC
    PETROS
    2210.0
    [m]
    DC
    PETROS
    2230.0
    [m]
    DC
    PETROS
    2250.0
    [m]
    DC
    PETROS
    2270.0
    [m]
    DC
    PETROS
    2290.0
    [m]
    DC
    PETROS
    2310.0
    [m]
    DC
    PETROS
    2330.0
    [m]
    DC
    PETROS
    2350.0
    [m]
    DC
    PETROS
    2370.0
    [m]
    DC
    PETROS
    2390.0
    [m]
    DC
    PETROS
    2410.0
    [m]
    DC
    PETROS
    2430.0
    [m]
    DC
    PETROS
    2450.0
    [m]
    DC
    PETROS
    2470.0
    [m]
    DC
    PETROS
    2490.0
    [m]
    DC
    PETROS
    2510.0
    [m]
    DC
    PETROS
    2530.0
    [m]
    DC
    PETROS
    2550.0
    [m]
    DC
    PETROS
    2580.0
    [m]
    DC
    PETROS
    2640.0
    [m]
    DC
    PETROS
    2660.0
    [m]
    SWC
    RRI
    2680.0
    [m]
    DC
    PETROS
    2700.0
    [m]
    DC
    PETROS
    2720.0
    [m]
    DC
    PETROS
    2780.0
    [m]
    DC
    PETROS
    2790.0
    [m]
    DC
    PETROS
    2800.0
    [m]
    DC
    PETROS
    2810.0
    [m]
    DC
    PETROS
    2820.0
    [m]
    DC
    PETROS
    2830.0
    [m]
    DC
    PETROS
    2840.0
    [m]
    DC
    PETROS
    2850.0
    [m]
    DC
    PETROS
    2860.0
    [m]
    DC
    PETROS
    2860.0
    [m]
    DC
    PETROS
    2870.0
    [m]
    DC
    PETROS
    2880.0
    [m]
    DC
    PETROS
    2890.0
    [m]
    DC
    PETROS
    2892.0
    [m]
    DC
    PETROS
    2895.0
    [m]
    DC
    PETROS
    2898.0
    [m]
    DC
    PETROS
    2901.0
    [m]
    DC
    PETROS
    2904.0
    [m]
    DC
    PETROS
    2910.0
    [m]
    DC
    PETROS
    2916.0
    [m]
    DC
    PETROS
    2922.0
    [m]
    DC
    PETROS
    2928.0
    [m]
    DC
    PETROS
    2934.0
    [m]
    DC
    PETROS
    2940.0
    [m]
    DC
    PETROS
    2946.0
    [m]
    DC
    PETROS
    2949.0
    [m]
    DC
    PETROS
    2953.7
    [m]
    C
    PETROS
    2955.2
    [m]
    C
    PETROS
    2956.8
    [m]
    C
    PETROS
    2958.5
    [m]
    C
    PETROS
    2960.6
    [m]
    C
    PETROS
    2962.8
    [m]
    C
    PETROS
    2968.4
    [m]
    C
    PETROS
    2974.0
    [m]
    C
    PETROS
    2982.9
    [m]
    C
    PETROS
    2989.0
    [m]
    C
    PETROS
    2994.9
    [m]
    C
    PETROS
    3000.3
    [m]
    C
    PETROS
    3010.7
    [m]
    C
    PETROS
    3020.6
    [m]
    C
    PETROS
    3024.7
    [m]
    C
    PETROS
    3028.9
    [m]
    C
    PETROS
    3035.9
    [m]
    C
    PETROS
    3042.8
    [m]
    C
    PETROS
    3052.8
    [m]
    C
    PETROS
    3069.9
    [m]
    C
    PETROS
    3076.0
    [m]
    C
    PETROS
    3082.7
    [m]
    C
    PETROS
    3092.6
    [m]
    C
    PETROS
    3104.6
    [m]
    C
    PETROS
    3107.5
    [m]
    C
    PETROS
    3123.7
    [m]
    C
    PETROS
    3131.8
    [m]
    C
    PETROS
    3147.8
    [m]
    C
    PETROS
    3155.5
    [m]
    C
    PETROS
    3158.8
    [m]
    C
    PETROS
    3162.8
    [m]
    C
    PETROS
    3165.7
    [m]
    C
    PETROS
    3169.0
    [m]
    DC
    PETROS
    3178.0
    [m]
    DC
    PETROS
    3187.0
    [m]
    DC
    PETROS
    3196.0
    [m]
    DC
    PETROS
    3205.0
    [m]
    DC
    PETROS
    3214.0
    [m]
    DC
    PETROS
    3223.0
    [m]
    DC
    PETROS
    3229.0
    [m]
    DC
    PETROS
    3238.0
    [m]
    DC
    PETROS
    3244.0
    [m]
    DC
    PETROS
    3253.0
    [m]
    DC
    PETROS
    3262.0
    [m]
    DC
    PETROS
    3271.0
    [m]
    DC
    PETROS
    3280.0
    [m]
    DC
    PETROS
    3289.0
    [m]
    DC
    PETROS
    3298.0
    [m]
    DC
    PETROS
    3307.0
    [m]
    DC
    PETROS
    3316.0
    [m]
    DC
    PETROS
    3325.0
    [m]
    DC
    HYDRO
    3334.0
    [m]
    DC
    PETROS
    3343.0
    [m]
    DC
    PETROS
    3352.0
    [m]
    DC
    PETROS
    3361.0
    [m]
    DC
    PETROS
    3370.0
    [m]
    DC
    PETROS
    3379.0
    [m]
    DC
    PETROS
    3388.0
    [m]
    DC
    PETROS
    3397.0
    [m]
    DC
    PETROS
    3406.0
    [m]
    DC
    PETROS
    3409.0
    [m]
    DC
    PETROS
    3415.0
    [m]
    DC
    PETROS
    3424.0
    [m]
    DC
    PETROS
    3433.0
    [m]
    DC
    PETROS
    3442.0
    [m]
    DC
    PETROS
    3451.0
    [m]
    DC
    PETROS
    3460.0
    [m]
    DC
    PETROS
    3467.0
    [m]
    DC
    PETROS

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT PEX ECS HNGS MSIP
    2730
    3467
    AIT PEX MASIP
    457
    1638
    MWD - DI GR RES
    173
    3467
    MWD - DI GR RES DEN NEU SON
    1638
    2828
    MWD- DI
    136
    469
    PEX MSIP ROBN
    457
    978
    ROBN PS HY PO LFA MS SC1 PC GR
    666
    906
    SAMPLING
    2959
    3381
    VSI4 GR
    437
    3465
    XPT CMR
    2845
    3450

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    172.0
    36
    172.0
    0.00
    SURF.COND.
    20
    457.0
    26
    466.0
    1.55
    FIT
    PILOT HOLE
    979.0
    8 1/2
    979.0
    0.00
    INTERM.
    13 3/8
    1634.0
    16
    1638.0
    0.00
    1642.0
    1642.0
    1.63
    LOT
    LINER
    9 5/8
    2827.0
    12 1/4
    2828.0
    0.00
    2832.0
    2832.0
    1.62
    LOT
    OPEN HOLE
    3467.0
    8 1/2
    3467.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    173
    1.30
    7.0
    Bentonite/Polymer mud
    173
    1.05
    6.0
    Spud Mud
    466
    1.26
    18.0
    XP-07
    466
    1.30
    10.0
    Bentonite/Polymer mud
    619
    1.27
    20.0
    XP-07
    850
    1.26
    18.0
    XP-07
    979
    1.26
    20.0
    XP-07
    979
    1.32
    19.0
    XP-07
    1107
    1.28
    19.0
    XP-07
    1170
    1.30
    21.0
    XP-07
    1675
    1.34
    22.0
    XP-07
    1888
    1.39
    24.0
    XP-07
    2667
    1.26
    20.0
    XP-07
    2750
    1.39
    23.0
    XP-07
    2826
    1.25
    14.0
    XP-07
    2828
    1.39
    24.0
    XP-07
    2830
    1.25
    14.0
    XP-07
    3166
    1.25
    16.0
    XP-07
    3467
    1.26
    20.0
    XP-07