Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/11-1 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/11-1 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/11-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    16/11-B SP:75.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Phillips Petroleum Company Norway
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    4-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    110
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.07.1967
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    31.10.1967
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    31.10.1969
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    24.09.2004
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    27.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    67.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3050.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3020.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    16
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    100
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ZECHSTEIN GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 4' 4'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 34' 8'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6436483.75
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    474564.38
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    112

  • Wellbore history
    Well 16/11-1 S is located in the Danish Norwegian Basin. The objective of the well was to test the hydrocarbon potential of the Tertiary, Mesozoic and Permian sediments. Specifically, Tertiary sandstones, Cretaceous sandstones and limestones, Jurassic and Triassic sandstones, Permian carbonates and Permian Rotligendes sandstone were considered to be prospective.
    Operations and results
    Wildcat well 16/11-1 S was spudded with the semi-submersible installation Ocean Viking on 17 July 1967 and drilled to TD at 3050 m (ca 3020 m TVD RKB) in the Late Permian Zechstein Group. The well is classified as deviated, but was not meant to be. During reaming operation at about 1463 m the hole was accidentally sidetracked. This was not discovered until 13 3/8" casing was set and the cement plug drilled through. Hole deviation was then determined to be 16 deg at the casing shoe. In order to prevent a dogleg the deviation was gradually decreased to 12.5 deg at about 2322 m and stabilized at an average of 12 deg to TD. The dip meter log indicates that the hole drifted in a N 45 deg E direction. While drilling at 2952 m the drill string stuck and a fish was left in the hole. A cement plug was set and the fish was bypassed by sidetracking with jet action from the bit. Upon reaching 2952 m, the pipe stuck a second time, which resulted in leaving a new fish. A second cement plug was set and the hole sidetracked using a Neyrpic turbine drill. The pipe stuck a third time at 2954 m and another fish was left. The hole was again sidetracked and mud weight increased to about 16 ppg. Drilling then continued to TD, before 9 5/8" casing was set. Circulation was lost immediately after drilling through the 9 5/8" casing shoe at 2957 m. Five Diaseal "M" squeezes and five DOC squeezes were performed in an attempt to regain circulation with a 16.0 ppg mud, but all attempts were unsuccessful. A Drispac/Flosal/Desco mud system was used to a depth of 2326 m. At this depth the system was converted to a Sodium Chloride -saturated Drispac/Flosal/Sodium Sulphate system. The salt-saturated mud system was used to total depth.
    The Tertiary section consisted mainly of clays and shales. Fairly high methane percentages were recorded by the chromatograph in the shaley lower part of this section as the section was drilled. Two zones within the Mesozoic were encountered which could be prospective reservoirs in other areas. These zones were the middle part of the Late Cretaceous chalk and the sandstones of the Early Jurassic. No shows were observed in either zone, but permeability was indicated in the Late Cretaceous chalk by a small salt-water inflow. Electric log calculations of the Early Jurassic sandstones indicated an average porosity of 23 percent and 100 percent water saturation. No sidewall or conventional cores were taken and no fluid samples collected.
    The well was permanently abandoned on 31 October 1967 as a dry well.
    Testing
    No drill stem test was performed

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    NO
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1841.00
    3048.00

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.30

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.03
    pdf
    0.80

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    30.92

  • Documents – Norwegian Offshore Directorate papers
    Documents – Norwegian Offshore Directorate papers
    Document name
    Document format
    Document size [MB]
    pdf
    44.94
    pdf
    10.68

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CAL
    451
    1494
    CCL
    1732
    2241
    CDM
    470
    2924
    CDS
    793
    1049
    EPIN
    1814
    2348
    FDC
    1814
    2348
    GR
    91
    451
    IES
    451
    1831
    LL-7
    1814
    2321
    ML C
    1494
    1830
    MLL C
    1814
    2321
    SGR C
    451
    2947
    SNP
    1814
    2348
    SRS
    451
    2947

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    145.0
    36
    145.0
    0.00
    LOT
    SURF.COND.
    20
    450.0
    26
    469.0
    0.00
    LOT
    INTERM.
    13 3/8
    1814.0
    17 1/2
    1829.0
    0.00
    LOT
    INTERM.
    9 5/8
    3050.0
    12 1/4
    3050.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    190
    1.05
    40.0
    Baroid
    469
    1.05
    31.0
    Baroid
    1543
    1.13
    36.0
    Baroid
    1829
    1.17
    45.0
    Baroid
    2011
    1.40
    62.0
    Baroid
    2963
    1.65
    53.0
    Baroid
    3049
    2.01
    54.0
    Baroid