Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

33/9-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    33/9-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    33/9-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LINE MNG-16 SP.778
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Mobil Exploration Norway INC
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    142-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    67
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    27.10.1975
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    01.01.1976
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.01.1978
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    12.04.2016
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    152.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3157.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    76
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    STATFJORD GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 20' 47.87'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 56' 51.7'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6802013.31
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    443705.30
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    410

  • Wellbore history
    General
    Well 33/9-5 was drilled on the northern part of the Statfjord structure on Tampen Spur in the northern North Sea. The objective was to appraise the northern extension of the Statfjord Field with the Brent Group as primary target. The Brent Group had previously proved oil bearing in wells 33/9-3 and 33/9-4 on the northern part of the structure. The well was positioned to penetrate the upper Brent reservoir at 2522 m MSL, 62 meters above the known field water level. The Statfjord Group was a secondary objective.
    Operations and results
    Appraisal well 33/9-5 was spudded with the semi-submersible installation  Ross Rig on 27 October 1975 and drilled to TD at 3157 m in Late Triassic sediments of the Statfjord Group.
    Top Brent Group (Tarbert Formation) was encountered at 2605 m, 57.8 m low to prognosis. As with other Brent Group oil wells in the Statfjord Field, high total gas readings (70 000 ppm) were encountered when the reservoir was penetrated. Using the field pay cut off value of 65% water saturation, the oil/water contact depth as measured from the CPI log is 2616.4 m (2591.4  MSL), which is 7.3 meters deeper than the main field water level. The resulting gross pay interval is 11.6 meters of which 100% is net pay using CPI field cut off values of 65% water saturation, 40% v-clay or 12% porosity. Average CPI measured porosity in the pay section is 22.1% and water saturation is 37%.
    The Statfjord Group was penetrated at 2998 m and was found water wet.
    One core was cut from 2611.5 to 2628.35 m with 88.7% recovery. The core to log depth shift was estimated to be -2.3 m. FIT fluid samples were taken at 2624.5 m (failed test), 2617.0 m (water with trace oil), 2611.0 m (water with trace mud), 2609.0 m (water with trace mud), 2607.0 m (35.8 °API oil and water), 2650.0 m (water with trace mud), and 2607.8 m (water only).
    The well was permanently abandoned on 1 January 1976 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    260.00
    3157.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2611.5
    2628.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    16.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2611-2614m
    Core photo at depth: 2614-2616m
    Core photo at depth: 2616-2619m
    Core photo at depth: 2619-2621m
    Core photo at depth: 2621-2624m
    2611-2614m
    2614-2616m
    2616-2619m
    2619-2621m
    2621-2624m
    Core photo at depth: 2624-2627m
    Core photo at depth: 2627-2628m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2624-2627m
    2627-2628m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2556.0
    [m]
    DC
    UOS
    2562.0
    [m]
    DC
    UOS
    2568.0
    [m]
    DC
    UOS
    2574.0
    [m]
    DC
    UOS
    2580.0
    [m]
    DC
    UOS
    2586.0
    [m]
    DC
    UOS
    2592.0
    [m]
    DC
    UOS
    2598.0
    [m]
    DC
    UOS
    2604.0
    [m]
    DC
    UOS
    2612.0
    [m]
    DC
    UOS
    2613.0
    [m]
    DC
    UOS
    2615.0
    [m]
    DC
    UOS
    2616.0
    [m]
    DC
    UOS
    2618.8
    [m]
    DC
    UOS
    2619.0
    [m]
    DC
    UOS
    2622.0
    [m]
    DC
    UOS
    2622.2
    [m]
    DC
    UOS
    2624.0
    [m]
    DC
    UOS
    2625.0
    [m]
    DC
    UOS
    2627.0
    [m]
    DC
    UOS
    2628.0
    [m]
    DC
    UOS
    2631.0
    [m]
    DC
    UOS
    2637.0
    [m]
    DC
    UOS
    2643.0
    [m]
    DC
    UOS
    2649.0
    [m]
    DC
    UOS
    2655.0
    [m]
    DC
    UOS
    2661.0
    [m]
    DC
    UOS
    2667.0
    [m]
    DC
    UOS
    2673.0
    [m]
    DC
    UOS
    2679.0
    [m]
    DC
    UOS

  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.27
    pdf
    4.05

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BGT
    450
    1895
    BHC
    451
    1900
    CDM AP
    1888
    3155
    DIR
    450
    1895
    DLL
    2449
    3157
    DLL MSFL
    2549
    3157
    FDC CNL
    1888
    3157
    IES
    460
    3157
    ISF SON
    451
    3155
    MUD
    460
    3157
    VELOCITY
    451
    3155

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    252.0
    36
    252.0
    0.00
    SURF.COND.
    20
    456.0
    26
    460.0
    0.00
    INTERM.
    13 3/8
    1889.0
    17 1/2
    1903.0
    0.00
    INTERM.
    3158.0
    12 1/4
    3158.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    252
    1.22
    Waterbased
    460
    1.10
    Waterbased
    1332
    1.13
    Waterbased
    1555
    1.20
    Waterbased
    1973
    1.56
    Waterbased
    2259
    1.58
    Waterbased
    2608
    1.50
    Waterbased
    2794
    1.62
    Waterbased

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.22