Faktasider Sokkeldirektoratet
Faktasider Sokkeldirektoratet
sodir.no          English
22.11.2024 - 09:09
Tidspunkt for siste synkronisering med Sokkeldirektoratets interne systemer

RAN SANDSTONE UNITS

Eksport: PDF ikon PDF
  • Generell informasjon

    Generell informasjon
    Attributt Verdi
    Litostrat. enhet
    Den litostratigrafiske enhetens offisielle navn.
    RAN SANDSTONE UNITS
    NPDID for litostrat. enhet
    Sokkeldirektoratets entydige nøkkel for litostratigrafiske enheter.
    125
    Nivå
    Angir den litostratigrafiske enhetens nivå. Lovlige verdier: GROUP, FORMATION, MEMBER.
    FORMATION
    Litostrat. enhet, forelder
    Den litostratigrafiske enhetens offisielle navn, refererer til forelder. Se også nivå. Vil være tom hvis Nivå = GROUP.
  • Nivå under

    Nivå under
    Litostrat. enhet
  • Beskrivelse

    Ran sandstone units

    Name
    Ran was the wife of the sea god Gir in Norse mythology. She liked to drag sailors down to the depths with her net.
    Well reference sections
    Norwegian well 2/7-15 from 3498 m to 3450 m, coordinates N 56°23'46.82", E 03°18'54.63" (Fig 5.22) . 16 m of cores in the lowermost part of the formation. Norwegian well 7/3-1 from 2412 m to 2396 m, coordinates N 57°50'35.25", E 02°44'55.61" (Fig 5.23) . No cores. Norwegian well 17/11-2 from 1802 m to 1767 m, coordinates N 58°06'54.91", E 03°22'09.81" (Fig 5.13) . No cores.
    Thickness
    The gross sandstone thicknesses vary from a few metres up to approximately 100 m. The gross thicknesses in the reference wells are 48 m ( 2/7-15 ), 16 m ( 7/3-1 ) and 35 m ( 17/11-2 ). Up to 130 m (gross) of Aptian-Albian sandstone sequences are penetrated in block 16/27 in the UK sector (see Distribution).
    Lithology
    The colour of the sandstones ranges from white to light grey, green and brown to reddish-brown. The sandstones are generally argillaceous, sometimes calcareous and glauconitic, and usually do not represent potential reservoir rocks in these wells.
    Basal stratotype
    The various sandstone units may appear in contact with the Åsgard , Tuxen , Sola and Rødby formations (Fig 5.4 , 5.7 , 5.8 , 5.9). Their lower boundaries are generally defined as the base of an upward decrease in the gamma-ray response when passing into the sandstone units (Fig 5.22 , 5.23) . The gamma-ray readings in the calcareous marlstones and chalks of the Tuxen Formation , especially its upper part, and the Mime Formation may be similar to those in the sandstones. The velocity curve is often less suitable for defining the lower boundary.
    Characteristics of the upper boundary
    The upper boundary can usually be identified as an upward increase in the gamma-ray readings (Fig 5.22) , and generally by a slight decrease in the sonic velocity.
    Distribution
    The Ran sandstone units are encountered in only a few wells in the Norwegian sector (Fig 5.21) , and Remarks).
    Age
    Ryazanian-Albian.
    Depositional environment
    The sandstones that have been penetrated are described as shallow (Norwegian sector) and deep water (UK sector) submarine fans.
    Remarks
    Hesjedal & Hamar (1983) recognised several scattered sandstone sequences which they described as the Kopervik and Klepp Formations in the Central Trough and Norwegian-Danish Basin, and the Florø Formation in the Agat Discovery in blocks 35/3 and 36/1. The Kopervik and Klepp Formations are here described as the Ran sandstone units. Since they consisted of several isolated sandstone bodies they should not have been given formation status, and the names did not conform with the existing recommendations. The Florø Formation is formally defined as the Agat Formation in this paper (see also General lithostratigraphic notes for Cretaceous).
    In the UK sector (the Andrew Field), just south of the Andrew Ridge and Fladen Ground Spur, Aptian-Albian sandstone sequences (the Bosun Member) are encountered in many wells, among others UK wells 16/27-1 and 16/27a-2 (100-130 m gross), 16/28-1 (50 m gross) and 16/28-6 (90 m gross). The palaeogeographical position of these sandstones, i.e. basinal areas close to the subaerially exposed major structural highs mentioned above, may be quite similar to the palaeogeographical situation along the western margin of the Maløy Fault Blocks. Here, up to 400 m (gross) thick sandstone sequences of Aptian-Early Cenomanian age were deposited in Norwegian blocks 35/3 and 36/1, and are defined as the
    Agat Formation in this paper.
    The Devil's Hole Formation (UK well 29/25-1) and the "Unnamed Formation" (UK well 14/20-5) in the UK sector are comparable to the Ran sandstone units.
    Source
    • Isaksen, D. and Tonstad, K. (eds.) 1989: A revised Cretaceous and Tertiary lithostratigraphic nomenclature for the Norwegian North Sea. NPD-Bulletin No. 5, 59 pp.
  • Brønnbaner som penetrerer

    Brønnbaner som penetrerer
    Brønnbane navn
    Dato for boreslutt
    Topp dyp [m]
    Bunn dyp [m]
    23.11.1985
    3713
    3717
    02.06.1980
    3450
    3498
    31.08.1981
    3325
    3432
    10.06.1969
    2396
    2412
    24.03.1969
    1880
    1902
    30.06.1968
    1447
    1510
    17.05.1976
    1787
    1802
  • Brønnbaner med kjerner

    Brønnbaner med kjerner
    Brønnbane navn
    Dato for boreslutt
    Kjernelengde [m]
    02.06.1980
    16
    31.08.1981
    10