6305/7-1
Export: PDF
-
General information
-
Wellbore history
GeneralWell 6305/7-1 was the first well drilled in licence PL 208 and the second in the Møre Basin deep-water area. The well was targeted at the Barden prospect at Tertiary level. The main objectives of the well were to establish the presence, quality and fluid content of the Lower Tertiary Egga Member in the Tang Formation and to penetrate a seismic flat-spot within this unit.Operations and resultsWildcat well 6305/7-1 was spudded in 857 m water depth with the semi-submersible installation "Ocean Alliance" on 6 July 1998 and drilled to TD at 3377 m in the Late Cretaceous Springar Formation. The well was drilled water based with seawater and hi-vis pills down to 1708 m and with KCl/NaCl/PAC mud from 1708 m to TD. Drilling went without major problems but was suspended from 20 July to 1 August (10 days) due to fishing regulations. Top Egga Member sandstone was penetrated at 2911 m. The reservoir was recognized by an abrupt increase in LWD resistivity and a decrease in LWD gamma. A total of 4 cores were cut from the Egga Member and top of the Springar Formation in the interval 2917 m to 3012.5 m with a total recovery of 94 m (98%). MDT samples were taken at 2921 and 2937 m in the Egga Member sandstone. The samples contained dry gas (93.5 % methane). Wire line coring and sampling proved a gas column from 2915 m to 2939.5 m. Both the reservoir thickness of the Egga formation and the net to gross were better than expected. The well was plugged and abandoned on 30 August 1998 and was classified as a gas appraisal well for the Ormen Lange 6305/5-1 gas discovery.TestingA drill stem test was performed in the interval 2915 m to 2931 m. The test flowed dry gas (93.3 % methane) with a GOR of 11000 Sm3/Sm3 -
Cuttings at the Norwegian Offshore Directorate
Cuttings at the Norwegian Offshore Directorate Cuttings available for sampling?YESCuttings at the Norwegian Offshore Directorate Cutting sample, top depth [m]Cutting samples, bottom depth [m]1710.003377.00 -
Cores at the Norwegian Offshore Directorate
Cores at the Norwegian Offshore Directorate Core sample numberCore sample - top depthCore sample - bottom depthCore sample depth - uom12917.02943.8[m ]22944.02971.2[m ]32971.02984.9[m ]42985.53011.8[m ]Cores at the Norwegian Offshore Directorate Total core sample length [m]94.1Cores at the Norwegian Offshore Directorate Cores available for sampling?YES -
Core photos
-
Palynological slides at the Norwegian Offshore Directorate
Palynological slides at the Norwegian Offshore Directorate Sample depthDepth unitSample typeLaboratory2917.7[m]CGEUS2923.2[m]CGEUS2930.1[m]CGEUS2951.4[m]CGEUS2952.6[m]COD2955.6[m]CGEUS2958.2[m]CGEUS2959.4[m]COD2959.7[m]CGEUS2961.5[m]COD2961.8[m]CGEUS2963.7[m]CGEUS2965.3[m]COD2965.5[m]CGEUS2968.8[m]CGEUS2969.0[m]COD2971.3[m]CGEUS2973.9[m]COD2974.4[m]CGEUS2976.5[m]COD2977.0[m]CGEUS2980.0[m]CGEUS2980.6[m]COD2982.0[m]CGEUS2983.6[m]CGEUS2987.2[m]CGEUS2989.0[m]COD2989.0[m]CGEUS2989.4[m]CGEUS2992.2[m]CGEUS2992.5[m]CGEUS2992.7[m]CGEUS2993.4[m]CGEUS2995.0[m]CGEUS2995.1[m]COD2995.7[m]CGEUS2995.7[m]CGEUS2998.5[m]CGEUS3001.0[m]CGEUS3001.1[m]COD3006.3[m]COD3007.7[m]CGEUS3009.8[m]COD3010.7[m]CGEUS -
Oil samples at the Norwegian Offshore Directorate
Oil samples at the Norwegian Offshore Directorate Test typeBottle numberTop depth
MD [m]Bottom depth
MD [m]Fluid typeTest timeSamples availableDSTDST 12931.002915.00CONDENSATE23.08.1998 - 00:00NO -
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit88388315291529256225622657291129922992 -
Composite logs
Composite logs Document nameDocument formatDocument size [MB]pdf0.33 -
Geochemical information
-
Documents – reported by the production licence (period for duty of secrecy expired)
Documents – reported by the production licence (period for duty of secrecy expired) Document nameDocument formatDocument size [MB].pdf2.10.pdf56.29 -
Drill stem tests (DST)
Drill stem tests (DST) Test numberFrom depth MD
[m]To depth MD
[m]Choke size
[mm]1.02915293123.8Drill stem tests (DST) Test numberFinal shut-in pressure
[MPa]Final flow pressure
[MPa]Bottom hole pressure
[MPa]Downhole temperature
[°C]1.028.96090Drill stem tests (DST) Test numberOil
[Sm3/day]Gas
[Sm3/day]Oil density
[g/cm3]Gas grav. rel.airGOR
[m3/m3]1.0586380000.7700.61011000 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]CSAT GR19202780CSAT GR27203360CST GR28323360FMI DSI20003373HALS DSI PEX EMS8832819MDT GR29143047MWD - DIR904925MWD - DIR FE28192917MWD - DIR FE29172919MWD - DIR PWD GR9412819MWD - RLL GR29443012PEX GPIT27613380 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30907.036907.00.00LOTINTERM.13 3/81696.017 1/21696.01.40LOTINTERM.9 5/82810.012 1/42819.00.00LOTLINER73377.08 1/23377.00.00LOT -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured9611.0320.0WATER BASED MUD12691.0315.0WATER BASED MUD17080.00WATER BASED MUD20711.2840.0WATER BASED MUD28191.3044.0WATER BASED MUD28521.3027.0WATER BASED MUD29441.3033.0WATER BASED MUD29681.3029.0WATER BASED MUD29801.3028.0WATER BASED MUD29931.3028.0WATER BASED MUD33771.081.0WATER BASED MUD -
Pressure plots
Pressure plots The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.Pressure plots Document nameDocument formatDocument size [MB]PDF0.29