Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7225/3-2

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7225/3-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7225/3-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline 1627 & crossline 2183
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Total E&P Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1444-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    100
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    29.04.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.08.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.08.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    07.08.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    KOBBE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    381.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2210.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2209.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    65
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    KLAPPMYSS FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    72° 57' 5.17'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    25° 58' 23.34'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    8095573.09
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    466396.98
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    35
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7149

  • Wellbore history
    General
    Well 7225/3-2 was drilled on the Norvarg Dome on the Bjarmeland Platform in the Barents Sea. The objective of the well was to appraise the 7225/3-1 Norvarg gas discovery. Primary target was channel sandstones in the Kobbe Formation. Triassic sandstones within the Carnian section and the Upper Snadd Formation as well as Jurassic sandstones in the Stø Formation were secondary targets.
    Operations and results
    Appraisal well 7225/3-2 was spudded with the semi-submersible installation Leiv Eiriksson on 29 April 2013 and drilled to TD at 2210 m in the Early Triassic Klappmyss Formation. During drilling operations of the 26” hole section at 500 m the drill string parted. The fish was successfully retrieved. After this, the hole packed off at 525 m and 535 m in the 26” section. Most of the NPT in the well were related to these events.  Further operation proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 554 m, with Glydril water based mud from 554 m to 1073 m, and with a water based mud from 1073 m to TD.
    Three main gas-filled reservoir layers were encountered in the Kobbe Formation. Channel A with top at 1590 m had a thickness of 18.7 m, a NTG of 76% and an average porosity and water saturation of 17% and 40% respectively. Channel D with top at 1775 m had a thickness of 33.1 m, a NTG of 51% and an average porosity and water saturation of 13% and 44% respectively. A third sandstone, “Anomaly 2”, with top at 1909.6 m had a thickness of 18.3 m, a NTG of 89% and an average porosity and water saturation of 13% and 48% respectively. All three had gas-down-to contacts. The secondary targets were water-wet. Shows (fluorescence and cut) were described on sandstones in the Kobbe Formation between 1550 m and 1950 m.
    Four 54 m core barrels were cut in the Kobbe Formation, with very low ROP, from 1553 to 1610 m (two cores) and from 1727 to 1757 m (two cores). While the recovery of last two cores was 100%, the first two gave respectively 86.1 and 76.4% recovery. MDT fluid samples were taken at 1600.7 m (dry gas), 1778. 31 m (filtrate + gas), 1788.59 m (filtrate), 1913.01 m (filtrate + gas + oil?), and 1923.64 m (filtrate + gas + oil?).
    The well was permanently abandoned on 7 August 2013 as a gas appraisal.
    Testing
    Two Drill Stem Tests were performed in two channel sandstones in the Kobbe Formation
    DST 1 tested 207.33 m of perforations from 1725.05 to 1932.38 m. It produced 28500 Sm3 gas/day through a 40/64” choke. The maximum temperature in the test, measured during the clean-up flow was 54.9 °C.
    DST 2 tested 23 m of perforation from 1587.5 to 1610.5 m. It produced 167400 Sm3 gas/day through a 36/64” choke. The maximum temperature in the test, measured at end of build-up after the clean-up flow was 48.6 °C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    554.00
    2205.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1553.0
    1561.6
    [m ]
    2
    1563.0
    1598.2
    [m ]
    3
    1727.0
    1734.5
    [m ]
    4
    1734.5
    1757.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    73.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1725
    1932
    12.5
    2.0
    1587
    1610
    20.6
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    23400
    2.0
    176200

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DP GR
    1913
    1923
    GR MDT
    732
    1020
    GR PPC
    554
    687
    GR PPC MSIP CBL FMI ECS CAL
    627
    2200
    HNGR APS TLD HRLA MCFL SP CMR CA
    1072
    2211
    HNGS GR CAL HRLA MCFL SP MSIP AP
    681
    1073
    LWD - RAB RES ECD GR DI FPWD
    1073
    2210
    LWD - RAB RES GR PWD DI
    687
    1073
    LWD - RES GR PWD DI SEIS
    474
    687
    MDT 3D GR
    1096
    1290
    MDT 3D GR
    1554
    1781
    MSCT GR 40XL SWC
    1552
    1974
    VSP GR
    386
    2140

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    474.0
    36
    474.0
    0.00
    SURF.COND.
    20
    547.0
    26
    554.0
    0.00
    INTERM.
    13 3/8
    681.0
    17 1/2
    687.0
    1.18
    INTERM.
    9 5/8
    1072.0
    12 1/4
    1073.0
    1.75
    LINER
    7
    2208.0
    8 1/2
    2210.0
    2.30

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    470
    1.37
    9.0
    KCl/Polymer-Glycol
    475
    1.35
    Spud mud
    554
    1.35
    Spud mud
    640
    1.37
    8.0
    KCl/Polymer-Glycol
    687
    1.12
    7.0
    KCl/Polymer-Glycol
    1073
    1.36
    12.0
    KCl/Polymer-Glycol
    1223
    1.37
    10.0
    KCl/Polymer-Glycol
    1554
    1.36
    12.0
    KCl/Polymer-Glycol
    1757
    1.36
    12.0
    KCl/Polymer-Glycol
    2210
    1.35
    Calcium Chloride

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.26