Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/1-6

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/1-6
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/1-6
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    SP 150 line 680301
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Elf Petroleum Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    190-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    52
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    26.01.1978
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    18.03.1978
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    18.03.1980
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.07.2004
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    24.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    105.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2895.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2894.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    54
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    JORSALFARE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 46' 57.68'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 5' 42.23'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6627711.35
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    449192.60
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    352

  • Wellbore history
    General
    Exploration well 25/1-6 is located 12 km southwards of the 25/1-1 well and 6 km south of the Frigg Field boundary. The main objective was a Paleocene seismic structure underlined by a strong discontinuous flat seismic event.
    Geological correlations and geophysical studies indicated a detritic sand body belonging to the Heimdal formation. The Cod or Heimdal clay layer could be the closure of this structure.á The structurally closed Frigg, Cod, and Danian Sands, and Late Cretaceous chalk were secondary objectives.
    Operations and results
    Well 25/6-1 was spudded with the semi-submersible installation Pentagone 84 on 26 January 1978 after spending 10 days on the location waiting on weather. No significant problems were encountered during the drilling to TD at 2895 m in Late Cretaceous limestone. The well was drilled with spud mud to 192 m, with CMC/Bentonite from 192 m to 468 m, and with Lignosulfonate/Dextrid mud from 468 m to TD.
    The first interval of interest was the Eocene Frigg Formation from 2107 m to 2150. This interval turned out to be shaly with thin sand layers up to 3 meter thick only. Some oil shows were recorded in the sands. In the lower part of the Frigg Formation a core was taken with four thin interbeds of sandstones medium to fine grained and weakly cemented. These sandstones were fluorescent (light yellow) and gave a fluorescent, light yellow extract. Massive Heimdal Formation sand was encountered from 2249 m to 2563 m. The unit has good reservoir characteristics with translucent fine to coarse, subrounded to subangular, mostly well-sorted sand. The porosity of the sandy levels varies from 20 to 25% and net sand thickness is about 226 m. The unit was water bearing. No shows were encountered during the drilling or on the lab. The lower part (2675 m to 2799 m) of the Danian sequence (Ty Formation) was composed of many intercalations of sandy levels and shaly beds. The sandy intervals had poor porosity except from 2752 m to 2758 m and from 2786 m to 2799 m where it reached 15%. The considered "flat event" was due to a velocity contrast between the shales and hard sandstone beds, which marked a lithological change within the Danian formations. The Late Cretaceous chalky limestones were encountered at 2799 m. They were tight (porosity about 5%) and without any shows. No fluid samples were taken in the well. The well was permanently abandoned as dry on 18 March 1978.
    Testing
    No drill stem test was performed

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    200.00
    2900.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2127.0
    2136.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    9.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2205.0
    [m]
    DC
    PETROSTR
    2220.0
    [m]
    DC
    PETROS
    2225.0
    [m]
    DC
    PETROS
    2235.0
    [m]
    DC
    PETROS
    2245.0
    [m]
    DC
    PETROS
    2330.0
    [m]
    DC
    PETROS
    2335.0
    [m]
    DC
    PETROS
    2375.0
    [m]
    DC
    PETROS
    2385.0
    [m]
    DC
    PETROS
    2700.0
    [m]
    DC
    RRI
    2710.0
    [m]
    DC
    RRI
    2740.0
    [m]
    DC
    RRI
    2750.0
    [m]
    DC
    RRI
    2790.0
    [m]
    DC
    RRI

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.44

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    5.34
    pdf
    14.65
    PDF
    5.39
    pdf
    23.07
    pdf
    15.46
    pdf
    5.16

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BGT
    1314
    2550
    FDC CNL CAL
    192
    468
    FDC CNL CAL GR
    457
    1322
    FDC CNL GR CAL
    2399
    2550
    FDC CNL GR CAL
    2523
    2895
    FDC GR CAL CNL
    1314
    2400
    FDC GR CAL CNL
    2399
    2550
    HDT
    2000
    2550
    HDT
    2523
    2895
    ISF BHC GR
    192
    468
    ISF BHC GR
    457
    1322
    ISF BHC GR
    1314
    2098
    ISF BHC GR
    1998
    2400
    ISF SL GR SP
    2399
    2550
    ISF SL GR SP
    2523
    2895

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    192.7
    36
    193.0
    0.00
    LOT
    SURF.COND.
    20
    460.0
    26
    463.0
    0.00
    LOT
    INTERM.
    13 3/8
    1314.0
    17 1/2
    1320.0
    0.00
    LOT
    INTERM.
    9 5/8
    2520.0
    12 1/4
    2545.0
    0.00
    LOT
    OPEN HOLE
    2895.0
    8 1/2
    2895.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    192
    1.05
    85.0
    water based
    468
    1.08
    16.0
    water based
    1325
    1.14
    42.0
    water based
    1937
    1.20
    72.0
    water based
    2120
    1.20
    63.0
    water based
    2360
    1.28
    28.0
    water based
    2550
    1.30
    27.0
    water based
    2739
    1.16
    14.0
    water based