Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
10.11.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/11-27

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/11-27
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/11-27
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    3D survey : NH9301-BIN -inline 1354 & xline878
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1449-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    25
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.05.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    29.05.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    29.05.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    29.05.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PALEOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    HEIMDAL FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    128.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1890.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1890.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    79
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TOR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 14' 15.09'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 32' 49.75'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6566740.69
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    474161.13
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7179
  • Wellbore history

    General
    Well 25/11-27 was drilled on the Grane F-structure, ca nine kilometres northeast of the Grane field in the North Sea. The primary objective was to prove petroleum in Paleocene reservoir rocks (the Heimdal Formation), but also to find out if there could be communication with the Grane field in the event of a discovery.
    Operations and results
    Wildcat well 25/11-27 was spudded with the semi-submersible installation Songa Trym on 4 May 2013 and drilled to TD at 1890 m in the Late Cretaceous Tor Formation. The first attempt to spud failed due a very competent seabed. The re-spud was successful and operations proceeded without further significant problems. No shallow gas was seen. The well was drilled with seawater and hi-vis sweeps down to 1159 m and with XP-07 oil based mud from 1159 m to TD.
    Top of the primary target Heimdal Formation was encountered at 1743 m, 10 m shallow to prognosis. The Heimdal Formation contains four sandstones in the upper part, varying in thickness between 2 to 5 meters, and a 39 m thick massive sandstone with top at 1766 m in the lower part. The sandstones were oil bearing with all five sandstones on the same oil gradient. The OWC was clearly defined at 1785 m in the middle of the lower sandstone. The reservoir had excellent properties. Pressure measurements show a highly undersaturated oil with similar properties and the same pressure regime as the main Grane Field reservoir. No oil shows were described in the well other than in the oil-bearing sandstones in the Heimdal Formation.
    One core was cut from 1769.4 to 1796.5 m in the lower Heimdal massive sandstone. MDT fluid samples were taken at 1766.5 m (oil of density 0.929 g/cm3) and 1803 m (water).
    The well was permanently abandoned on 29 May 2013 as an oil discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1160.00
    1890.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1769.0
    1795.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    26.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1200.0
    [m]
    DC
    FUGRO
    1220.0
    [m]
    DC
    FUGRO
    1240.0
    [m]
    DC
    FUGRO
    1260.0
    [m]
    DC
    FUGRO
    1280.0
    [m]
    DC
    FUGRO
    1300.0
    [m]
    DC
    FUGRO
    1320.0
    [m]
    DC
    FUGRO
    1340.0
    [m]
    DC
    FUGRO
    1360.0
    [m]
    DC
    FUGRO
    1380.0
    [m]
    DC
    FUGRO
    1400.0
    [m]
    DC
    FUGRO
    1420.0
    [m]
    DC
    FUGRO
    1430.0
    [m]
    DC
    FUGRO
    1440.0
    [m]
    DC
    FUGRO
    1450.0
    [m]
    DC
    FUGRO
    1460.0
    [m]
    DC
    FUGRO
    1480.0
    [m]
    DC
    FUGRO
    1500.0
    [m]
    DC
    FUGRO
    1520.0
    [m]
    DC
    FUGRO
    1540.0
    [m]
    DC
    FUGRO
    1560.0
    [m]
    DC
    FUGRO
    1580.0
    [m]
    DC
    FUGRO
    1600.0
    [m]
    DC
    FUGRO
    1620.0
    [m]
    DC
    FUGRO
    1640.0
    [m]
    DC
    FUGRO
    1660.0
    [m]
    DC
    FUGRO
    1670.0
    [m]
    DC
    FUGRO
    1680.0
    [m]
    DC
    FUGRO
    1690.0
    [m]
    DC
    FUGRO
    1693.0
    [m]
    DC
    FUGRO
    1696.0
    [m]
    DC
    FUGRO
    1699.0
    [m]
    DC
    FUGRO
    1702.0
    [m]
    DC
    FUGRO
    1705.0
    [m]
    DC
    FUGRO
    1711.0
    [m]
    DC
    FUGRO
    1717.0
    [m]
    DC
    FUGRO
    1723.0
    [m]
    DC
    FUGRO
    1729.0
    [m]
    DC
    FUGRO
    1732.0
    [m]
    DC
    FUGRO
    1735.0
    [m]
    DC
    FUGRO
    1741.0
    [m]
    DC
    FUGRO
    1747.0
    [m]
    DC
    FUGRO
    1753.0
    [m]
    DC
    FUGRO
    1759.0
    [m]
    DC
    FUGRO
    1765.0
    [m]
    DC
    FUGRO
    1769.5
    [m]
    DC
    FUGRO
    1798.0
    [m]
    DC
    FUGRO
    1804.0
    [m]
    DC
    FUGRO
    1810.0
    [m]
    DC
    FUGRO
    1816.0
    [m]
    DC
    FUGRO
    1822.0
    [m]
    DC
    FUGRO
    1828.0
    [m]
    DC
    FUGRO
    1834.0
    [m]
    DC
    FUGRO
    1840.0
    [m]
    DC
    FUGRO
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MDT
    1716
    1803
    MWD - PD VARC8 TELE GVR8
    1159
    1890
    MWD - PD VARC9 TELE
    208
    1159
    PEX MSIP AIT
    1150
    1896
    VSI4 GR
    356
    1820
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    202.0
    36
    208.0
    0.00
    INTERM.
    13 3/8
    1150.6
    17 1/2
    1159.0
    1.71
    LOT
    OPEN HOLE
    1890.0
    12 1/4
    1890.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    208
    1.03
    seawater
    1159
    1.03
    seawater
    1890
    1.28
    OBM XP-07