Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
10.11.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

33/2-2 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    33/2-2 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    33/2-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    EOTW11:inline 8343 & crossline 15329
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1557-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    100
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    03.03.2015
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    10.06.2015
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.06.2017
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.06.2017
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LUNDE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    340.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3530.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3524.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    7.5
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TEIST FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 45' 7.58'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 36' 40.6'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6847511.82
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    426672.46
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7630

  • Wellbore history
    General
    Well 33/2-2 S, was an exploration well drilled to test the Morkel prospect on the eastern down faulted terrace of the Makrell Horst. The well is located 1.7 km northeast of the closest neighbouring well, 33/5-1 (1979), which was drilled on the crest of the horst. The primary exploration target for the well was to prove petroleum in Late and Middle Jurassic reservoir rocks (Intra-Draupne Formation sandstone and the Brent group). The secondary exploration target was to prove hydrocarbons in Early Jurassic (the Statfjord Group) and Late Triassic reservoir rocks (the Lunde Formation).
    Operations and results
    Wildcat well 33/2-2 S was spudded with the semi-submersible installation Bredford Dolphin on 2 March 2015 and drilled to TD at 3530 m in the Triassic Teist Formation. No significant problem was encountered in the operations. The well was drilled with seawater and hi-vis pills down to 435 m, with Aqua-Drill mud from 435 m to 1754 m, with Carbo-Sea oil based mud from 1754 m to 2793 m, and with Aqua-Drill mud from 2793 m to TD.
    The Early Cretaceous Mime Formation rest unconformably on the Triassic in the well. The Jurassic, including the primary exploration target was not encountered. In the secondary exploration target, the well encountered oil in the Lunde Formation from 2945 m to 3113 m, of which 12 m sandstone of poor reservoir quality. An ODT at 3112 m (3105 m TVD) is supported by the data, but it is not possible to establish hydrocarbon contacts confidently. Hydrocarbon shows were observed in greater parts of the well: from 1410 to 1650 m, from 2242 to 2260 m, and more or less the whole well below 2941 m.
    Four cores were cut in the Triassic section. Core 1 and 2 were cut from 2943 to 2960.4 m. Core 3 was cut from 2988.7 to 2997.2 m, and core 4 from 3049 to 3059 m. Core recovery was from 81 to 98%. MDT fluid samples were taken at 2946.3 m (water), 3005.8 m (oil), 3066.9 m (oil), 3079.4 m (oil). Single stage separation of the samples gave GOR's in the range 193 to 219 Sm3/Sm3 and stock-tank oil density in the range 0.819 to 0.822 g/cm3.
    The well was permanently abandoned on 10 June 2015 as an oil discovery.
    Testing
    One drill stem test was performed from the interval 3007.5 to 3115 m in the Lunde Formation. The test produced approximately 20 Sm3 oil and 4500 Sm3 gas /day through an 18/64" choke. The DST confirms the logging and poro-perm assessment indicating that the reservoir formation is rather tight and has low producability. The DST temperature was 121.5 °C

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    440.00
    3530.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2943.0
    2948.6
    [m ]
    2
    2949.1
    2960.1
    [m ]
    3
    2988.7
    2995.3
    [m ]
    4
    3049.0
    3058.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    32.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3008
    3115
    7.1
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    121
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    20
    4500

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR XPT JAR
    2792
    3526
    FMI MSIP PPC GR JAR
    365
    3529
    MDT SAMP JAR
    3098
    3098
    MDT XLD JAR
    2920
    2936
    MSCT GR 1H
    2975
    0
    MSCT GR 1I
    2963
    3092
    MSCT GR 1J
    3097
    3112
    MSCT GR 1K
    2934
    3478
    MWD - GR PWD RES CAL DEN NEU SON
    2879
    3527
    MWD - GR PWD RES DIR
    365
    422
    MWD - GR PWD RES DIR SON
    435
    1194
    MWD - GR RES PWD DIR DEN NEU SON
    1752
    2785
    MWD - GR RES PWD DIR SON
    1207
    1745
    MWD - PWD GR RES CAL DEN NEU SON
    2793
    2940
    MWD - RES GR DIR
    407
    1205
    UBI HRLA PEX HNGSECS JAR
    2788
    3525
    VSP
    409
    3460

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    431.5
    36
    434.5
    0.00
    PILOT HOLE
    1200.0
    12 1/4
    1200.0
    0.00
    SURF.COND.
    20
    1207.0
    26
    1215.0
    1.60
    LOT
    INTERM.
    13 5/8
    1745.0
    17 1/2
    1754.0
    1.79
    LOT
    LINER
    9 5/8
    2792.0
    12 1/4
    2793.0
    1.91
    LOT
    LINER
    7
    3196.0
    8 1/2
    0.0
    0.00
    OPEN HOLE
    3530.0
    8 1/2
    3530.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    385
    1.51
    21.0
    Water Based
    435
    1.03
    1.0
    Water Based
    906
    1.51
    21.0
    Water Based
    984
    1.30
    11.0
    Water Based
    1215
    1.40
    14.0
    Water Based
    1865
    1.55
    39.0
    Water Based
    2485
    1.48
    18.0
    Water Based
    2720
    1.65
    47.0
    Water Based
    3157
    1.71
    1.0
    Water Based
    3530
    1.78
    33.0
    Water Based