Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/5-2

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/5-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    SUSPENDED
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/5-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    200-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    123
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    16.08.1978
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    16.12.1978
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    16.12.1980
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    05.01.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    VESTLAND GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    TRIASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    HEGRE GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    121.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4322.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    5.75
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    127
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEGRE GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 38' 36.74'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 36' 16.48'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6501352.42
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    419002.37
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    316

  • Wellbore history
    General
    Well 15/5-2 was drilled in the Ve Sub-basin in the North Sea, north of the Sleipner Vest Field and 15/5-1 Gina Krog Discovery. The main objective of the well was to test possible hydrocarbon accumulations in Middle to Late Jurassic Bathonian/Callovian transgressive sandstones and Middle Jurassic Bajocian deltaic sandstones. The well was located in a purposely off-crestal position on an approximately 16 km2 large structure some 7 km north-west of the 15/5-1 discovery.
    The well was planned to penetrate into the Triassic with a projected total depth of 4500 m.
    Operations and results
    Wildcat well 15/5-2 was spudded with the semi-submersible installation Treasure Seeker on 16 August 1978 and drilled to TD at 4322 m in the Triassic Hegre Group. At 1267 m, the string unscrewed in a tight section, but it was fished without problems. After drilling to 2293 m, the string stuck when pulling out of hole. This time the fish was not recovered and a sidetrack was performed with kick-of at 1775 m. Heavy weather caused further delays, otherwise the drilling went forth without significant problems to TD. The well was drilled with seawater mud mixed with gel and Spersene down to 454 m, and with a Spersene/XP-20 (lignosulphonate) mud from 454 m to TD. At 2232 m 1% Diesel was added to the mud.
    Two hydrocarbon bearing sandstone intervals were penetrated by the well. In the Jurassic, only a thin Early to Middle Bathonian sandstone development was penetrated between 4035 m and 4055 m. Interbeds of siltstones and shales reduced the 20 m gross pay to a net pay of 7.3 m from wireline log interpretation. Average porosity and average water saturation over the pay interval was calculated to 14.3 and 41.7% respectively. The top of the Triassic sandstones was encountered at 4141.3 m and continued with interbeds of varicoloured shales and siltstones to TD. From wireline log evaluation hydrocarbon bearing sandstones were seen down to 4158.1 m. Below this a tight cemented sandstone appears, masking the exact hydrocarbon - water contact. Proven gross pay interval is thus 16.8 m while the net pay is 12.8 m. Average porosity over this interval has been calculated to 14.6 % and the average water saturation to 43 %.
    Above top Jurassic weak oil shows were observed on limestones at 2792 and 2828 m in the Tor Formation, between 3488 m and 3517 m in the Lower Hod and Blodøks formations, and between 3707 m and 3723 m in the Rødby Formation. In the Jurassic oil shows were recorded on sandstones from 4008 m to 4055 m. In the Triassic, no oil shows were seen despite the hydrocarbon saturation (gas) in the sandstones shown by the logs.
    Two cores were cut in the Middle Jurassic sequence. Core 1 was taken from 4013.6 m to 4020.6 m and recovered 5.1 m (72.8 %). The core was decided to be cut based on sandstone occurrence in the ditch cuttings, but only shale and coal beds were found in the core. Core 2 was cut from 4032.5 m to 4043.0 m and recovered 9.8 m (93.3 %). The core to log depth shift is ca +4.5 m for both cores. RFT fluid samples were attempted at 4148.5 m, 4145 m, 4053 m, and 4157.5 m. Only mud filtrate was retrieved at all depths.
    The well was suspended on 16 December 1978 for future re-entry and testing. It is classified as a gas discovery.
    Testing
    No drill stem test was performed.
    >

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    195.00
    4323.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4013.6
    4018.8
    [m ]
    2
    4032.5
    4042.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    15.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 4013-4015m
    Core photo at depth: 4015-4018m
    Core photo at depth: 4032-4034m
    Core photo at depth: 4034-4035m
    Core photo at depth: 4035-4037m
    4013-4015m
    4015-4018m
    4032-4034m
    4034-4035m
    4035-4037m
    Core photo at depth: 4037-4039m
    Core photo at depth: 4039-4041m
    Core photo at depth: 4041-4042m
    Core photo at depth:  
    Core photo at depth:  
    4037-4039m
    4039-4041m
    4041-4042m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    3765.0
    [m]
    DC
    RRI
    3820.0
    [m]
    DC
    RRI
    3850.0
    [m]
    DC
    RRI
    4034.1
    [m]
    C
    RRI

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.64
    pdf
    0.09
    pdf
    1.10
    pdf
    0.64

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    3.12
    pdf
    13.18

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CCL
    0
    3696
    CPI
    4005
    4295
    CST
    1655
    2990
    CST
    3000
    3710
    CST
    3720
    3992
    CST
    3753
    4288
    CST
    3753
    4315
    CST
    3758
    4140
    CST
    3912
    4147
    CST
    3925
    3964
    CST
    3968
    4323
    DLL MSFL
    4000
    4324
    FDC CNL
    455
    4325
    HDT
    1593
    3712
    HDT
    3690
    4323
    HRT
    541
    1589
    HRT
    2655
    3652
    ISF SON
    192
    4326
    RFT
    3990
    4292
    RFT
    4053
    0
    RFT
    4148
    0
    RFT
    4157
    0
    VELOCITY
    500
    4323

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    194.0
    36
    194.5
    0.00
    LOT
    SURF.COND.
    20
    454.0
    26
    469.0
    0.00
    LOT
    INTERM.
    13 3/8
    1598.0
    17 1/2
    1615.0
    0.00
    LOT
    INTERM.
    9 5/8
    3696.0
    12 1/4
    3714.0
    0.00
    LOT
    LINER
    7
    4300.0
    8 1/2
    4322.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    194
    1.20
    waterbased
    469
    1.14
    waterbased
    1462
    1.20
    waterbased
    3682
    1.34
    waterbased
    3872
    1.43
    waterbased
    4013
    1.59
    waterbased

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21