Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6406/8-2

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6406/8-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6406/8-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    crossline 2968-inline 1932(TO05M01 PSDM)
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Total E&P Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1124-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    163
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    28.10.2006
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    08.04.2007
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    08.04.2009
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    08.04.2009
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    21.5
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    363.6
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4700.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4697.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    169
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TILJE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 28' 49.95'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 20' 17.62'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7153423.99
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    372069.89
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5435
  • Wellbore history

    General
    Well 6406/8-2 was drilled to evaluate the Hans prospect, a rotated and truncated Jurassic fault block in the southern part of the Sklinna Ridge on the Halten Terrace. The primary objective of the well was to test the hydrocarbon potential of the Middle and Early Jurassic Ile, Tofte and Tilje Formations. As reservoir pressure of 795 bar and reservoir temperature of 150 deg (+/- 5 deg ) were expected at top Ile Formation (-4250m TVDSS), the well was designated as High Pressure High Temperature (HPHT).
    Operations and results
    Well was spudded with the semi-submersible installation Ocean Vanguard on 28 October 2006 and drilled to TD at 4700m in the Early Jurassic Tilje Formation. The well was drilled and logged in 163 days of which ca 28 days were WOW. The well was drilled with seawater and hi-vis sweeps down to 1422 m, with Performadril WBM (0-5% glycol) from 1422 m to 2361 m, and with XP-07 oil based mud (15 - 35 % iso + n-alkanes) from 2361 m to TD.
    A total of 123.5 m of net sands were found in the Middle to Lower Jurassic reservoirs corresponding to a NTG of 33.8%. Effective porosity averaged 15.7% with water saturation of up to 93.4%. All main objectives Ile, Tofte and Tilje Formations were water bearing, with no indication of any hydrocarbons. The only oil shows reported from the well were some very weak shows at 2890 - 2940 m in thin Springar Formation sands. Only one significant gas peak of 5.1% occurred when entering the Ile reservoir.
    No coring, fluid sampling or VSP were acquired. MDT pressures acquired in Ile, Ror and Tilje Formations confirmed a water gradient of 1.02 sg. No wire line fluid samples were taken.
    The well was permanently abandoned on 8 April 2007 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1440.00
    4700.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    ACTS GR CBL VDL
    1976
    2323
    ACTS GR CNL TLD DSI GPIT GR
    2334
    3054
    AIT DSI IS GR
    4142
    4639
    AIT DSI IS LDS APS HNGS
    4142
    4427
    DSI CH
    2400
    3040
    DSI IS LDS APS GR ACTS ECRD
    3040
    4139
    GR MDT
    4264
    4410
    GR MDT
    4264
    4711
    MWD - GABI DIR GR RES PWD
    1430
    1856
    MWD - GR RES PWD DIR
    1856
    2361
    MWD - GR RES PWD DIR
    4152
    4700
    MWD - PWD AGR RES DIR
    3063
    4152
    MWD - PWD DGR RES DIR
    2361
    3063
    MWD - PWD GR RES DIR
    466
    1430
    VDL CBL GR CCL
    2500
    4153
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    458.0
    36
    466.0
    0.00
    LOT
    SURF.COND.
    20
    1409.0
    26
    1422.0
    1.67
    LOT
    INTERM.
    16
    2332.0
    19 3/4
    2339.0
    1.91
    LOT
    INTERM.
    13 3/8
    3034.0
    16
    3063.0
    0.00
    LOT
    INTERM.
    9 5/8
    4136.0
    12 1/4
    4152.0
    2.00
    LOT
    OPEN HOLE
    4700.0
    8 1/2
    4700.0
    2.14
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    958
    1.20
    SPUD MUD
    1200
    1.02
    SPUD MUD
    1430
    1.20
    SPUD MUD
    1610
    1.50
    52.0
    KCL/POLYMER-GLY
    1814
    1.60
    29.0
    KCL/POLYMER-GLY
    1855
    1.60
    58.0
    KCL/POLYMER-GLY
    1920
    1.60
    47.0
    KCL/POLYMER-GLY
    2064
    1.60
    56.0
    KCL/POLYMER-GLY
    2361
    1.50
    21.0
    KCL/POLYMER-GLY
    2380
    1.70
    20.0
    NABM
    3063
    1.78
    30.0
    NABM
    3562
    1.78
    46.0
    NABM
    3900
    1.92
    78.0
    NABM
    4032
    1.91
    58.0
    NABM
    4045
    1.85
    56.0
    NABM
    4152
    1.91
    30.0
    NABM
    4338
    1.91
    30.0
    NABM
    4603
    1.91
    38.0
    DUMMY
    4700
    1.91
    58.0
    NABM