Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7120/6-3 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7120/6-3 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7120/6-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN11 IM07-inline 3490 & crosline 1356
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1392-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    52
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.10.2012
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    30.11.2012
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    30.11.2014
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    11.03.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    24.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    327.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3030.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3017.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    16
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    116
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    NORDMELA FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    71° 41' 2.43'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    20° 43' 16.97'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7953925.23
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    490226.96
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    34
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6772

  • Wellbore history
    General
    Well 7120/6-3 S was drilled on the Juksa prospect in the north-western part of the Hammerfest Basin, in a sub-basin north of the Snøhvit field in the Barents Sea. The primary objective was to test the lower part of the Early Cretaceous Kolmule Formation. Secondary target was wedges of intra-formational quartzitic sandstones in the uppermost Hekkingen/lowermost Knurr Formations. Tertiary target was sandstones in the Early-Middle Jurassic sequence.
    Operations and results
    Wildcat well 7120/6-3 S was spudded with the semi-submersible installation Transocean Arctic on 10 October 2012 and drilled to TD at 3030 m (3017 m TVD) in the Early Jurassic Nordmela Formation. An 8 1/2” pilot hole was drilled from seabed to 780 m to check for shallow gas. No shallow gas was seen. No significant problem was encountered in the operations. The well was drilled with seawater and hi-vis sweeps down to 770 m, with KCl/GEM/polymer mud from 770 m to TD.
    The well encountered sandstones with good shows in the lower Kolmule Formation, but they produced water with only traces of hydrocarbons during RCI sampling. No sands or hydrocarbon shows were seen in the secondary target, assumed to be the Knurr Formation. Sandstones in the Early-Middle Jurassic Stø Formation were water bearing with shows in side wall cores from the interval 2925 -2976 m. The well penetrated a 2-meter thick organic rich shale (oil prone source rock) at 2416 m in the Kolje Formation. The lower part of the Hekkingen Formation also had a high organic content.
    One core was cut from 1974 to 1989.3 m with 100% recovery in the Kolmule Formation. RCI fluid samples were taken at 1977 m, 1982 m, and 1993.5 m in the lower Kolmule sandstones. Water with traces of oil was retrieved in these samples. RCI fluid samples were taken also at 2911 m (water) in the Stø Formation and at 3012 m (water) in the Nordmela Formation.
    The well was permanently abandoned on 30 November 2012 as a well with shows.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    790.00
    3030.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1974.0
    1989.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    15.3
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    790.0
    [m]
    DC
    ROBERTSO
    830.0
    [m]
    DC
    ROBERT
    870.0
    [m]
    DC
    ROBERT
    910.0
    [m]
    DC
    ROBERT
    950.0
    [m]
    DC
    ROBERT
    990.0
    [m]
    DC
    ROBERT
    1030.0
    [m]
    DC
    ROBERT
    1070.0
    [m]
    DC
    ROBERT
    1110.0
    [m]
    DC
    ROBERT
    1150.0
    [m]
    DC
    ROBERT
    1190.0
    [m]
    DC
    ROBERT
    1230.0
    [m]
    DC
    ROBERT
    1250.0
    [m]
    DC
    ROBERT
    1260.0
    [m]
    DC
    ROBERT
    1270.0
    [m]
    DC
    ROBERT
    1280.0
    [m]
    DC
    ROBERT
    1290.0
    [m]
    DC
    ROBERT
    1300.0
    [m]
    DC
    ROBERT
    1310.0
    [m]
    DC
    ROBERT
    1320.0
    [m]
    DC
    ROBERT
    1330.0
    [m]
    DC
    ROBERT
    1340.0
    [m]
    DC
    ROBERT
    1350.0
    [m]
    DC
    ROBERT
    1360.0
    [m]
    DC
    ROBERT
    1370.0
    [m]
    DC
    ROBERT
    1380.0
    [m]
    DC
    ROBERT
    1390.0
    [m]
    DC
    ROBERT
    1400.0
    [m]
    DC
    ROBERT
    1410.0
    [m]
    DC
    ROBERT
    1420.0
    [m]
    DC
    ROBERT
    1430.0
    [m]
    DC
    ROBERT
    1440.0
    [m]
    DC
    ROBERT
    1450.0
    [m]
    DC
    ROBERT
    1460.0
    [m]
    DC
    ROBERT
    1470.0
    [m]
    DC
    ROBERT
    1480.0
    [m]
    DC
    ROBERT
    1490.0
    [m]
    DC
    ROBERT
    1500.0
    [m]
    DC
    ROBERT
    1510.0
    [m]
    DC
    ROBERT
    1520.0
    [m]
    DC
    ROBERT
    1530.0
    [m]
    DC
    ROBERT
    1540.0
    [m]
    DC
    ROBERT
    1580.0
    [m]
    DC
    ROBERT
    1590.0
    [m]
    DC
    ROBERT
    1600.0
    [m]
    DC
    ROBERT
    1610.0
    [m]
    DC
    ROBERT
    1620.0
    [m]
    DC
    ROBERT
    1630.0
    [m]
    DC
    ROBERT
    1640.0
    [m]
    DC
    ROBERT
    1650.0
    [m]
    DC
    ROBERT
    1660.0
    [m]
    DC
    ROBERT
    1670.0
    [m]
    DC
    ROBERT
    1680.0
    [m]
    DC
    ROBERT
    1690.0
    [m]
    DC
    ROBERT
    1700.0
    [m]
    DC
    ROBERT
    1709.0
    [m]
    DC
    ROBERT
    1718.0
    [m]
    DC
    ROBERT
    1727.0
    [m]
    DC
    ROBERT
    1736.0
    [m]
    DC
    ROBERT
    1745.0
    [m]
    DC
    ROBERT
    1754.0
    [m]
    DC
    ROBERT
    1763.0
    [m]
    DC
    ROBERT
    1772.0
    [m]
    DC
    ROBERT
    1781.0
    [m]
    DC
    ROBERT
    1790.0
    [m]
    DC
    ROBERT
    1799.0
    [m]
    DC
    ROBERT
    1808.0
    [m]
    DC
    ROBERT
    1817.0
    [m]
    DC
    ROBERT
    1826.0
    [m]
    DC
    ROBERT
    1835.0
    [m]
    DC
    ROBERT
    1844.0
    [m]
    DC
    ROBERT
    1853.0
    [m]
    DC
    ROBERT
    1862.0
    [m]
    DC
    ROBERT
    1871.0
    [m]
    DC
    ROBERT
    1880.0
    [m]
    DC
    ROBERT
    1889.0
    [m]
    DC
    ROBERT
    1898.0
    [m]
    DC
    ROBERT
    1916.0
    [m]
    DC
    ROBERT
    1925.0
    [m]
    DC
    ROBERT
    1934.0
    [m]
    DC
    ROBERT
    1943.0
    [m]
    DC
    ROBERT
    1952.0
    [m]
    DC
    ROBERT
    1961.0
    [m]
    DC
    ROBERT
    1970.0
    [m]
    DC
    ROBERT
    1974.0
    [m]
    C
    ROBERT
    1974.7
    [m]
    C
    ROBERT
    1975.3
    [m]
    C
    ROBERT
    1976.0
    [m]
    C
    ROBERT
    1977.2
    [m]
    C
    ROBERT
    1978.5
    [m]
    C
    ROBERT
    1978.7
    [m]
    C
    ROBERT
    1982.8
    [m]
    C
    ROBERT
    1983.5
    [m]
    C
    ROBERT
    1983.5
    [m]
    C
    ROBERT
    1984.5
    [m]
    C
    ROBERT
    1984.7
    [m]
    C
    ROBERT
    1985.2
    [m]
    C
    ROBERT
    1985.7
    [m]
    C
    ROBERT
    1987.1
    [m]
    C
    ROBERT
    1987.5
    [m]
    C
    ROBERT
    1988.8
    [m]
    C
    ROBERT
    1997.0
    [m]
    DC
    ROBERT
    2006.0
    [m]
    DC
    ROBERT
    2015.0
    [m]
    DC
    ROBERT
    2024.0
    [m]
    DC
    ROBERT
    2042.0
    [m]
    DC
    ROBERT
    2051.0
    [m]
    DC
    ROBERT
    2069.0
    [m]
    DC
    ROBERT
    2078.0
    [m]
    DC
    ROBERT
    2096.0
    [m]
    DC
    ROBERT
    2105.0
    [m]
    DC
    ROBERT
    2123.0
    [m]
    DC
    ROBERT
    2132.0
    [m]
    DC
    ROBERT
    2141.0
    [m]
    DC
    ROBERT
    2150.0
    [m]
    DC
    ROBERT
    2159.0
    [m]
    DC
    ROBERT
    2168.0
    [m]
    DC
    ROBERT
    2177.0
    [m]
    DC
    ROBERT
    2186.0
    [m]
    DC
    ROBERT
    2195.0
    [m]
    DC
    ROBERT
    2204.0
    [m]
    DC
    ROBERT
    2213.0
    [m]
    DC
    ROBERT
    2231.0
    [m]
    DC
    ROBERT
    2240.0
    [m]
    DC
    ROBERT
    2249.0
    [m]
    DC
    ROBERT
    2258.0
    [m]
    DC
    ROBERT
    2267.0
    [m]
    DC
    ROBERT
    2294.0
    [m]
    DC
    ROBERT
    2303.0
    [m]
    DC
    ROBERT
    2312.0
    [m]
    DC
    ROBERT
    2330.0
    [m]
    DC
    ROBERT
    2357.0
    [m]
    DC
    ROBERT
    2366.0
    [m]
    DC
    ROBERT
    2375.0
    [m]
    DC
    ROBERT
    2393.0
    [m]
    DC
    ROBERT
    2411.0
    [m]
    DC
    ROBERT
    2420.0
    [m]
    DC
    ROBERT
    2429.0
    [m]
    DC
    ROBERT
    2447.0
    [m]
    DC
    ROBERT
    2456.0
    [m]
    DC
    ROBERT
    2465.0
    [m]
    DC
    ROBERT
    2474.0
    [m]
    DC
    ROBERT
    2483.0
    [m]
    DC
    ROBERT
    2492.0
    [m]
    DC
    ROBERT
    2500.0
    [m]
    DC
    ROBERT
    2510.0
    [m]
    DC
    ROBERT
    2609.0
    [m]
    DC
    ROBERT
    2618.0
    [m]
    DC
    ROBERT
    2627.0
    [m]
    DC
    ROBERT
    2636.0
    [m]
    DC
    ROBERT
    2645.0
    [m]
    DC
    ROBERT
    2654.0
    [m]
    DC
    ROBERT
    2663.0
    [m]
    DC
    ROBERT
    2672.0
    [m]
    DC
    ROBERT
    2681.0
    [m]
    DC
    ROBERT
    2690.0
    [m]
    DC
    ROBERT
    2699.0
    [m]
    DC
    ROBERT
    2708.0
    [m]
    DC
    ROBERT
    2717.0
    [m]
    DC
    ROBERT
    2726.0
    [m]
    DC
    ROBERT
    2735.0
    [m]
    DC
    ROBERT
    2744.0
    [m]
    DC
    ROBERT
    2753.0
    [m]
    DC
    ROBERT
    2762.0
    [m]
    DC
    ROBERT
    2771.0
    [m]
    DC
    ROBERT
    2780.0
    [m]
    DC
    ROBERT
    2789.0
    [m]
    DC
    ROBERT
    2798.0
    [m]
    DC
    ROBERT
    2810.0
    [m]
    DC
    ROBERT
    2816.0
    [m]
    DC
    ROBERT
    2825.0
    [m]
    DC
    ROBERT
    2834.0
    [m]
    DC
    ROBERT
    2843.0
    [m]
    DC
    ROBERT
    2852.0
    [m]
    DC
    ROBERT
    2861.0
    [m]
    DC
    ROBERT
    2873.0
    [m]
    DC
    ROBERT
    2879.0
    [m]
    DC
    ROBERT
    2888.0
    [m]
    DC
    ROBERT
    2897.0
    [m]
    DC
    ROBERT
    2906.0
    [m]
    DC
    ROBERT
    2915.0
    [m]
    DC
    ROBERT
    2924.0
    [m]
    DC
    ROBERT
    2933.0
    [m]
    DC
    ROBERT
    2942.0
    [m]
    DC
    ROBERT
    2951.0
    [m]
    DC
    ROBERT
    2960.0
    [m]
    DC
    ROBERT
    2969.0
    [m]
    DC
    ROBERT
    2996.0
    [m]
    DC
    ROBERT
    3005.0
    [m]
    DC
    ROBERT
    3014.0
    [m]
    DC
    ROBERT
    3023.0
    [m]
    DC
    ROBERT
    3030.0
    [m]
    DC
    ROBERT

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DSL CN ZDL RTEX MLL
    1898
    2497
    DSL CN ZDL RTEX MLL ORIT XMAC
    2497
    3029
    DSL MCOR
    1945
    2473
    DSL PCOR
    2512
    3017
    DSL RCX IFX
    1971
    1995
    DSL XMAC ORIT STAR UXPL
    1898
    2479
    GR RCX IFX
    2907
    3012
    MWD - INC RES GR
    735
    1898
    MWD - OT ORD CCN APX
    329
    777
    MWD - PWD GR RES DIR DEN CAL NEU
    735
    1898
    MWD - PWD GR RES DIR DEN CAL NEU
    1847
    3027
    VSP
    390
    3015

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    417.0
    36
    421.0
    0.00
    SURF.COND.
    20
    766.0
    26
    772.0
    1.58
    LOT
    OPEN HOLE
    777.0
    17 1/2
    777.0
    0.00
    PILOT HOLE
    780.0
    8 1/2
    780.0
    0.00
    INTERM.
    9 5/8
    1898.0
    12 1/4
    1903.0
    1.50
    LOT
    LINER
    7
    2498.0
    8 1/2
    2500.0
    1.57
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    357
    1.03
    14.0
    Spud Mud
    772
    1.35
    15.0
    Water Base
    1903
    1.35
    16.0
    Polymer
    2500
    1.11
    22.0
    Polymer
    3030
    1.11
    20.0
    Polymer

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.27