Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7227/10-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7227/10-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7227/10-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST10011:inline 2171 & xline 11407
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1547-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    30
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    12.10.2014
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    10.11.2014
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.11.2016
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.11.2016
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    40.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    232.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3152.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3135.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    13.4
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    KOBBE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    72° 9' 48.74'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    27° 14' 18.15'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    8007408.64
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    508149.85
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    35
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7589

  • Wellbore history
    General
    Well 7227/10-1 was drilled to test the Saturn prospect in the Nordkapp Basin in the Barents Sea. The primary objective of the well was to prove a commercial oil volume in Intra Carnian (Snadd) reservoir sandstones. Secondary objectives were to test the hydrocarbon and potential in the Early-Middle Triassic Kobbe Formation and to test the presence and quality of the Early-Middle Triassic (Ladinian) source rocks.
    Operations and results
    Wildcat well 7227/10-1 was spudded with the semi-submersible installation Transocean Spitsbergen on 12 October 2014 and drilled to TD at 3152 m in the Middle Triassic Kobbe Formation. No significant problem was encountered in the operations. The well was drilled with seawater and hi-vis sweeps down to 600 m and with Glydril mud from 600 m to TD.
    The well penetrated Tertiary, Cretaceous claystones, Jurassic claystones, sandstones and siltstones as well as Triassic sandstones, claystones, siltstones and coal stringers. Top of the Intra Carnian reservoir was encountered at 2288 m (2282 m TVD). Top of the Kobbe reservoir was encountered at 2785 m (2776 m TVD). No hydrocarbons were encountered in any of the reservoir levels. A thin (2.5 m) source rock sequence was penetrated at 2780.7 m (2779.7 m) at the base of the Snadd Formation. Analyses of sidewall cores from this sequence show average TOC of 5% and average Rock-Eval Hydrogen Index of 400 mg HC/g TOC, which correspond to excellent oil prone character, although too thin in well position to be an effective source rock. Only trace oil shows were described in this well. The shows were observed post-well in the laboratory, mostly in the interval 2450 to 2531 m in the Snadd Formation.
    No cores were cut in the well. MDT water samples were collected at 2320.7 m.
    The well was permanently abandoned on 10 November 2014 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    600.00
    3151.00

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    600.0
    [m]
    DC
    ROBERTSO
    630.0
    [m]
    DC
    ROBERT
    660.0
    [m]
    DC
    ROBERT
    690.0
    [m]
    DC
    ROBERT
    720.0
    [m]
    DC
    ROBERT
    750.0
    [m]
    DC
    ROBERT
    780.0
    [m]
    DC
    ROBERT
    810.0
    [m]
    DC
    ROBERT
    840.0
    [m]
    DC
    ROBERT
    870.0
    [m]
    DC
    ROBERT
    900.0
    [m]
    DC
    ROBERT
    930.0
    [m]
    DC
    ROBERT
    960.0
    [m]
    DC
    ROBERT
    990.0
    [m]
    DC
    ROBERT
    1020.0
    [m]
    DC
    ROBERT
    1050.0
    [m]
    DC
    ROBERT
    1080.0
    [m]
    DC
    ROBERT
    1110.0
    [m]
    DC
    ROBERT
    1140.0
    [m]
    DC
    ROBERT
    1170.0
    [m]
    DC
    ROBERT
    1200.0
    [m]
    DC
    ROBERT
    1230.0
    [m]
    DC
    ROBERT
    1260.0
    [m]
    DC
    ROBERT
    1290.0
    [m]
    DC
    ROBERT
    1320.0
    [m]
    DC
    ROBERT
    1350.0
    [m]
    DC
    ROBERT
    1380.0
    [m]
    DC
    ROBERT
    1400.0
    [m]
    DC
    ROBERT
    1410.0
    [m]
    DC
    ROBERT
    1420.0
    [m]
    DC
    ROBERT
    1480.0
    [m]
    DC
    ROBERT
    1490.0
    [m]
    DC
    ROBERT
    1500.0
    [m]
    DC
    ROBERT
    1510.0
    [m]
    DC
    ROBERT
    1520.0
    [m]
    DC
    ROBERT
    1530.0
    [m]
    DC
    ROBERT
    1540.0
    [m]
    DC
    ROBERT
    1550.0
    [m]
    DC
    ROBERT
    1560.0
    [m]
    DC
    ROBERT
    1570.0
    [m]
    DC
    ROBERT
    1580.0
    [m]
    DC
    ROBERT
    1590.0
    [m]
    DC
    ROBERT
    1600.0
    [m]
    DC
    ROBERT
    1610.0
    [m]
    DC
    ROBERT
    1620.0
    [m]
    DC
    ROBERT
    1630.0
    [m]
    DC
    ROBERT
    1640.0
    [m]
    DC
    ROBERT
    1650.0
    [m]
    DC
    ROBERT
    1660.0
    [m]
    DC
    ROBERT
    1670.0
    [m]
    DC
    ROBERT
    1680.0
    [m]
    DC
    ROBERT
    1690.0
    [m]
    DC
    ROBERT
    1700.0
    [m]
    DC
    ROBERT
    1710.0
    [m]
    DC
    ROBERT
    1720.0
    [m]
    DC
    ROBERT
    1730.0
    [m]
    DC
    ROBERT
    1740.0
    [m]
    DC
    ROBERT
    1750.0
    [m]
    DC
    ROBERT
    1760.0
    [m]
    DC
    ROBERT
    1770.0
    [m]
    DC
    ROBERT
    1780.0
    [m]
    DC
    ROBERT
    1790.0
    [m]
    DC
    ROBERT
    1800.0
    [m]
    DC
    ROBERT
    1810.0
    [m]
    DC
    ROBERT
    1820.0
    [m]
    DC
    ROBERT
    1840.0
    [m]
    DC
    ROBERT
    1860.0
    [m]
    DC
    ROBERT
    1880.0
    [m]
    DC
    ROBERT
    1900.0
    [m]
    DC
    ROBERT
    1920.0
    [m]
    DC
    ROBERT
    1940.0
    [m]
    DC
    ROBERT
    1960.0
    [m]
    DC
    ROBERT
    1980.0
    [m]
    DC
    ROBERT
    2000.0
    [m]
    DC
    ROBERT
    2020.0
    [m]
    DC
    ROBERT
    2040.0
    [m]
    DC
    ROBERT
    2060.0
    [m]
    DC
    ROBERT
    2080.0
    [m]
    DC
    ROBERT
    2100.0
    [m]
    DC
    ROBERT
    2120.0
    [m]
    DC
    ROBERT
    2140.0
    [m]
    DC
    ROBERT
    2160.0
    [m]
    DC
    ROBERT
    2170.0
    [m]
    DC
    ROBERT
    2182.0
    [m]
    DC
    ROBERT
    2194.0
    [m]
    DC
    ROBERT
    2206.0
    [m]
    DC
    ROBERT
    2218.0
    [m]
    DC
    ROBERT
    2230.0
    [m]
    DC
    ROBERT
    2242.0
    [m]
    DC
    ROBERT
    2254.0
    [m]
    DC
    ROBERT
    2266.0
    [m]
    DC
    ROBERT
    2278.0
    [m]
    DC
    ROBERT
    2286.5
    [m]
    SWC
    ROBERT
    2290.0
    [m]
    DC
    ROBERT
    2302.0
    [m]
    DC
    ROBERT
    2305.5
    [m]
    SWC
    ROBERT
    2314.0
    [m]
    DC
    ROBERT
    2326.0
    [m]
    DC
    ROBERT
    2338.0
    [m]
    DC
    ROBERT
    2350.0
    [m]
    DC
    ROBERT
    2362.0
    [m]
    DC
    ROBERT
    2374.0
    [m]
    DC
    ROBERT
    2386.0
    [m]
    DC
    ROBERT
    2398.0
    [m]
    DC
    ROBERT
    2410.0
    [m]
    DC
    ROBERT
    2415.6
    [m]
    SWC
    ROBERT
    2422.0
    [m]
    DC
    ROBERT
    2434.0
    [m]
    DC
    ROBERT
    2446.0
    [m]
    DC
    ROBERT
    2458.0
    [m]
    DC
    ROBERT
    2470.0
    [m]
    DC
    ROBERT
    2472.8
    [m]
    SWC
    ROBERT
    2482.0
    [m]
    DC
    ROBERT
    2494.0
    [m]
    DC
    ROBERT
    2506.0
    [m]
    DC
    ROBERT
    2518.0
    [m]
    DC
    ROBERT
    2530.0
    [m]
    DC
    ROBERT
    2542.0
    [m]
    DC
    ROBERT
    2554.0
    [m]
    DC
    ROBERT
    2566.0
    [m]
    DC
    ROBERT
    2578.0
    [m]
    DC
    ROBERT
    2581.1
    [m]
    SWC
    ROBERT
    2590.0
    [m]
    DC
    ROBERT
    2602.0
    [m]
    DC
    ROBERT
    2610.8
    [m]
    SWC
    ROBERT
    2614.0
    [m]
    DC
    ROBERT
    2626.0
    [m]
    DC
    ROBERT
    2653.0
    [m]
    DC
    ROBERT
    2665.0
    [m]
    DC
    ROBERT
    2677.0
    [m]
    DC
    ROBERT
    2689.0
    [m]
    DC
    ROBERT
    2701.0
    [m]
    DC
    ROBERT
    2708.0
    [m]
    SWC
    ROBERT
    2713.0
    [m]
    DC
    ROBERT
    2725.0
    [m]
    DC
    ROBERT
    2737.0
    [m]
    DC
    ROBERT
    2738.0
    [m]
    SWC
    ROBERT
    2749.0
    [m]
    DC
    ROBERT
    2761.0
    [m]
    DC
    ROBERT
    2768.3
    [m]
    SWC
    ROBERT
    2773.0
    [m]
    DC
    ROBERT
    2776.8
    [m]
    SWC
    ROBERT
    2783.2
    [m]
    SWC
    ROBERT
    2785.0
    [m]
    DC
    ROBERT
    2790.4
    [m]
    SWC
    ROBERT
    2797.0
    [m]
    DC
    ROBERT
    2802.2
    [m]
    SWC
    ROBERT
    2809.0
    [m]
    DC
    ROBERT
    2821.0
    [m]
    DC
    ROBERT
    2833.0
    [m]
    DC
    ROBERT
    2856.2
    [m]
    SWC
    ROBERT
    2857.0
    [m]
    DC
    ROBERT
    2869.0
    [m]
    DC
    ROBERT
    2881.0
    [m]
    DC
    ROBERT
    2893.0
    [m]
    DC
    ROBERT
    2905.0
    [m]
    DC
    ROBERT
    2912.2
    [m]
    SWC
    ROBERT
    2917.0
    [m]
    DC
    ROBERT
    2929.0
    [m]
    DC
    ROBERT
    2941.0
    [m]
    DC
    ROBERT
    2953.0
    [m]
    DC
    ROBERT
    2965.0
    [m]
    DC
    ROBERT
    2970.0
    [m]
    SWC
    ROBERT
    2977.0
    [m]
    DC
    ROBERT
    2989.0
    [m]
    DC
    ROBERT
    3001.0
    [m]
    DC
    ROBERT
    3013.0
    [m]
    DC
    ROBERT
    3025.0
    [m]
    DC
    ROBERT
    3037.0
    [m]
    DC
    ROBERT
    3049.0
    [m]
    DC
    ROBERT
    3061.0
    [m]
    DC
    ROBERT
    3073.0
    [m]
    DC
    ROBERT
    3085.0
    [m]
    DC
    ROBERT
    3097.0
    [m]
    DC
    ROBERT
    3109.0
    [m]
    DC
    ROBERT
    3121.0
    [m]
    DC
    ROBERT
    3133.0
    [m]
    DC
    ROBERT
    3142.0
    [m]
    DC
    ROBERT
    3151.0
    [m]
    DC
    ROBERT

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    FMI GR
    2337
    2860
    FMI GR
    2980
    2980
    MDT GR
    2199
    2967
    MSCT GR
    2203
    2970
    MSIP HRLA PEX GR
    2074
    2980
    MSIP PEX GR
    415
    2145
    MWD - GR RES APWD DIR
    1470
    2171
    MWD - GR RES DIR
    298
    1470
    MWD - RES GR APWD DEN CAL RES NE
    2170
    3152
    USIT CBL
    1404
    2170
    VSP GR
    785
    2980

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    321.0
    42
    329.0
    0.00
    SURF.COND.
    20
    589.0
    26
    597.0
    1.36
    FIT
    INTERM.
    13 3/8
    1462.0
    17 1/2
    1470.0
    0.00
    LINER
    9 5/8
    2170.0
    12 1/4
    2171.0
    2.40
    FIT
    OPEN HOLE
    3152.0
    8 1/2
    3152.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    597
    1.10
    8.0
    Glydril
    1039
    1.13
    11.0
    Glydril
    1470
    1.15
    12.0
    Glydril
    1470
    1.16
    13.0
    Glydril
    2171
    1.16
    12.0
    Glydril
    2218
    1.20
    13.0
    Glydril
    3152
    1.22
    13.0
    Glydril