Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
05.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/9-19

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/9-19
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/9-19
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH9201- INLINE 439 & X-LINE 1341
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    937-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    44
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    09.09.1998
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.10.1998
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.10.2000
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    24.01.2014
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    TARBERT FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    NESS FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    29.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    105.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3560.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3559.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    126
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    DRAKE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 27' 35.38'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 41' 38.94'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6702819.74
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    483176.89
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3561
  • Wellbore history

    General
    Well 30/9-19 was the first well to be drilled on the Delta structure west of the Oseberg Field in the North Sea. The primary objective was to prove hydrocarbons in the Middle Jurassic Tarbert Formation. The underlying Middle Jurassic Ness Formation was a secondary target.
    Operations and results
    Wildcat well 30/9-19 was spudded with the semi-submersible installation West Delta on 9 September 1998 and drilled to TD at 3560 m in the Early Jurassic Drake Formation. A 9 5/8" pilot hole was drilled prior to the 26" section to check for shallow gas. No gas was encountered. No significant problem was encountered in the operations although 25% of the rig time was counted as down time. This was a sum of various minor equipment failures, fishing for MDT tool and WOW. The well was drilled with sea water and hi-vis pills down to 1205 m and with ANCO 2000 mud from 1205 m to TD.
    The Tarbert Formation was penetrated from 3092 m to 3264 m. The main Tarbert reservoir was encountered at 3138 m and it contained gas in the upper part down to 3216 m and oil from ca 3231 m down to 3247 m. The gas and the oil columns are separated by a shaley siltstone with a double coal layer. The oil column was over-pressured compared to the gas column.
    An allochtonous Ness block (3062.5 - 3087 m) has been interpreted in the Early Cretaceous section, supposed to be a slide associated with degradation of the major fault zone to the east. This block contains a thin gas-filled sand layer at 3072 to 3075 m. Gas was also encountered in a channel sand within the lowermost Ness Formation from 3452 -3456.5 m.
    Three cores were cut in the well. Core no 1 (3184 - 3240 m) and core no 2 (3240 -3247 m) were cut in the Tarbert Formation, while core no 3 (3494 - 3522 m) was cut in the Oseberg/Rannoch (OR) formations and into the underlying Dunlin Group. Wire line fluid samples were taken at 3153 m, 3233 m, 3234 m, 3244 m, and 3488.5 m. Pressure points were taken between 3196 and 3215 m.
    The well was permanently abandoned on 22 October 1998 as a gas and oil discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1210.00
    3560.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3184.0
    3240.3
    [m ]
    2
    3240.3
    3246.7
    [m ]
    3
    3494.0
    3521.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    90.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Core photos

    Core photos
    Core photo at depth: 3184-3189m
    Core photo at depth: 3189-3194m
    Core photo at depth: 3194-3199m
    Core photo at depth: 3199-3204m
    Core photo at depth: 3204-3209m
    3184-3189m
    3189-3194m
    3194-3199m
    3199-3204m
    3204-3209m
    Core photo at depth: 3209-3214m
    Core photo at depth: 3214-3219m
    Core photo at depth: 3219-3224m
    Core photo at depth: 3224-3229m
    Core photo at depth: 3229-3234m
    3209-3214m
    3214-3219m
    3219-3224m
    3224-3229m
    3229-3234m
    Core photo at depth: 3234-3239m
    Core photo at depth: 3239-3243m
    Core photo at depth: 3243-3246m
    Core photo at depth: 3494-3499m
    Core photo at depth: 3499-3504m
    3234-3239m
    3239-3243m
    3243-3246m
    3494-3499m
    3499-3504m
    Core photo at depth: 3504-3509m
    Core photo at depth: 3509-3514m
    Core photo at depth: 3514-3519m
    Core photo at depth: 3519-3521m
    Core photo at depth:  
    3504-3509m
    3509-3514m
    3514-3519m
    3519-3521m
  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    32.94
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR GR
    3065
    3515
    CST GR
    2975
    3136
    FMI NGT DSI ACTS
    2907
    3556
    MDT GR
    3029
    3497
    MDT GR
    3247
    3247
    PEX HALS TLD HGNS AMS
    1341
    3255
    PEX HALS TLD HGNS AMS
    3200
    3556
    VSP GR
    2530
    3198
    VSP GR
    3190
    3520
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    231.0
    36
    231.0
    0.00
    LOT
    SURF.COND.
    20
    1198.0
    26
    1205.0
    0.00
    LOT
    PILOT HOLE
    1202.0
    9 7/8
    1202.0
    0.00
    LOT
    INTERM.
    13 3/8
    2318.5
    17 1/2
    2329.0
    0.00
    LOT
    INTERM.
    9 5/8
    2907.0
    12 1/4
    2922.0
    0.00
    LOT
    OPEN HOLE
    3560.0
    8 1/2
    3560.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    231
    1.05
    water based
    1175
    1.20
    water based
    1205
    1.20
    water based
    1580
    1.45
    19.0
    water based
    2750
    1.35
    21.0
    water based
    3238
    1.26
    17.0
    water based
    3560
    1.31
    17.0
    water based
  • Pressure plots

    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.21