Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
24.12.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7/9-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7/9-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7/9-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LINE N 7-3. SP.42
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Conoco Norway Inc.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    54-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    38
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    22.04.1971
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    29.05.1971
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    29.05.1973
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    24.09.2004
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    31.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    70.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2931.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    5.5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    113
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ZECHSTEIN GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    57° 20' 37.1'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 51' 21.4'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6355791.53
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    491329.32
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    191

  • Wellbore history
    General
    Well 7/9-1 is located on the Reke Fault Zone between the Jæren High and the Sørvestlandet High. The objective of the well was to test for hydrocarbons in Tertiary, Cretaceous, Jurassic, and Triassic reservoirs over a Zechstein salt well which showed 1300 feet of vertical closure over an area of about 65 square km at the base Tertiary level.
    The well is Reference Well for the Gassum and Fjerritslev formations.
    Operations and results
    Wildcat well 7/9-1 was spudded with the jack-up installation Mærsk Explorer on 22 April 1970 and drilled to TD at 2931 m in Zechstein salt. The well was spudded using a high viscosity gel-seawater mud. After drilling out of the 20" casing, which stuck at 242 m, the mud was converted to a lignosulphonate-seawater. The 213 m of 26" rat hole left below the 20" casing gave considerable trouble by acting as a build up area for large balls of gumbo, which collected there as 17 1/2" hole was being made. An attempt to run electric logs at the 13 3/8" casing point failed because of the fill at 442 m. Drilling detergent was used to reduce torque and drag and was successful in the upper part of the hole. The diesel oil content of the mud was maintained between 4% and 7%. A deviation problem arose in the 8 1/2" hole, starting around 2255 m where the angle was 4.5°. It increased steadily and at 2723 m the last survey point was 5.5°. Light bit weight, high rotary speeds, and a bottom hole assembly usually successful in dropping angle had no effect.
    The Tertiary Paleocene Sands were not developed over the structure. The other objectives, the Tertiary Danian calceranites, the late Cretaceous Maastrichtian chalk, and the Middle Jurassic to Triassic sandstones, were confirmed, but were water bearing. During the drilling of the Tertiary section to a depth of 1676 m shale gas from the sometimes richly organic shales maintained a high background between 0.5% and 1% methane in the mud with maximum values of 2.5% recorded between 503 m and 594 m. Below 1676 m background readings were generally below 0.1% methane to the base of the Tertiary shale section. The upper Jurassic shales between 2454 m and 2484 m also gave indications up to 0.1% methane. Apart from the shale gas recorded no shows were encountered in any of the porous sections. Organic geochemical analyses showed that the vitrinite in the well was immature to TD (%Ro only up to 0.5), while the maturity based on spore coloration indicated mature kerogen below ca 2000 m. Relatively high TOC was measured in Cretaceous "grey shales", in the Jurassic, and possibly in the Zechstein Group. However, the data appear highly affected by cavings, and from picked lithologies only the Late Jurassic Mandal Formation appeared to be a reliable source rock. It had TOC around 4% and Hydrogen Index around 250 mg HC /g rock.
    Two conventional cores were cut in the well and both jammed off. The first retrieved 4.7 m chalky limestone of Danian age (Ekofisk Formation) from the interval 2209.5 m to 2216.8 m. The second core retrieved 3 m of Maastrichtian chalk (Tor Formation) from the interval 2256.4 m to 2260.4 m. No fluid sample was taken.
    The well was plugged and abandoned as a dry hole on 29 May 1971.
    Testing
    No drill stem test was performed

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    NO
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    102.10
    2930.35

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    7249.0
    7264.5
    [ft ]
    2
    7403.0
    7413.0
    [ft ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    7.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.29

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.34
    pdf
    0.69
    pdf
    0.36

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    0.71
    pdf
    3.81
    pdf
    0.15
    pdf
    0.30

  • Documents – Norwegian Offshore Directorate papers
    Documents – Norwegian Offshore Directorate papers
    Document name
    Document format
    Document size [MB]
    pdf
    33.18
    pdf
    0.49
    pdf
    0.35

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BHC GR
    91
    2149
    BHC SONIC
    1070
    2149
    BHC SONIC GR
    2145
    2927
    DIP
    2144
    2930
    FDC GR
    2327
    2930
    IEL SP
    1070
    2914
    MLL
    2143
    2928
    SWC
    2209
    2260
    VSP
    91
    2930

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    108.0
    36
    110.0
    0.00
    LOT
    SURF.COND.
    20
    241.0
    26
    244.0
    0.00
    LOT
    INTERM.
    13 3/8
    1070.0
    17 1/2
    1076.0
    0.00
    LOT
    INTERM.
    9 5/8
    2143.0
    12 1/4
    2144.0
    0.00
    LOT
    OPEN HOLE
    2931.0
    8 1/2
    2931.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    457
    1.19
    42.0
    seawater
    717
    1.17
    45.0
    seawater
    1070
    1.43
    50.0
    seawater
    1563
    1.54
    55.0
    seawater
    2046
    1.56
    52.0
    seawater
    2405
    1.67
    46.0
    seawater
    2930
    1.68
    53.0
    seawater