Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/3-5 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/3-5 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    RE-CLASS TO DEV
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/3-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST 8513-1486 & CDP. 176
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    728-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    50
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    01.05.1992
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    19.06.1992
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    19.06.1994
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    03.10.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reclassified to wellbore
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    DUNLIN GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    56.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    175.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4724.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3340.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    69.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    120
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    STATFJORD GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 46' 57.82'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 53' 52.7'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6738750.57
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    494443.81
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1950

  • Wellbore history
    General
    Well 30/3-5 S was drilled on the G prospect, which lies to the east of the Veslefrikk Field. The main target was the Brent Group with Early Jurassic Statfjord Group as a secondary target. The well was designed to be completed as an oil producer on the G prospect.
    Operations and results
    Well 30/3-5 S was spudded through slot 6 on the fixed installation Veslefrikk A on 1 May 1992 and drilled to TD at 4724 m (3340 m TVD) in the Early Jurassic Statfjord Group. Severe doglegs and ledging in the well path created problems in the 24" section from 472 to 1409 m. An attempt to reach an additional target in the Statfjord Formation failed due to problems with directional drilling. The well was drilled with gypsum/PAC mud down to 2551 m and with oil based mud from 2551 m to TD.
    The planned targets were reached. The top of the Brent Group was penetrated at 4050 m, 8 m vertically deeper than prognosed. As expected, a fully developed Brent Group was present in the well. Apart from the Amundsen Formation, which came in 3.5 m shallower than prognosed, the formation tops came in slightly deeper than prognosed. The well proved hydrocarbons in the Brent Group and in the Cook Formation of the Dunlin Group. Differential pressure depletion was observed in some zones of the Brent Formation, attributed to communication with the main Veslefrikk Field which has been in production since 1989. The Statfjord Group had shows in the uppermost part. Rare, weak shows were seen in limestones and siltstones in the Shetland Group. No other shows were reported outside the reservoir section.
    Five cores were cut. Cores 1 to 3 were cut from 4060 to 4160 m in the Ness-Etive-Rannoch-Oseberg formations, core 4 was cut from 4168 to 4213 m in the Oseberg Formation, and core 5 was cut from 4429 to 4446 m in the Cook Formation. All cores had significant positive depth shifts compared to logs; 5.5 m, 5.0 m, 5.5 m, 7.0 m, and 6.0 m respectively for cores 1 to 5. RFT fluid samples were taken at 4222 m and at 4426 m.
    The well was completed on 19 June 1992 as an oil appraisal well. It was converted to development well 30/3-A-14.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    480.00
    4710.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4060.0
    4066.0
    [m ]
    2
    4076.0
    4107.7
    [m ]
    3
    4108.0
    4160.8
    [m ]
    4
    4168.0
    4213.1
    [m ]
    5
    4429.0
    4445.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    152.1
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 4060-4065m
    Core photo at depth: 4065-4070m
    Core photo at depth: 4070-4075m
    Core photo at depth: 4075-4075m
    Core photo at depth: 4076-4081m
    4060-4065m
    4065-4070m
    4070-4075m
    4075-4075m
    4076-4081m
    Core photo at depth: 4081-4086m
    Core photo at depth: 4086-4091m
    Core photo at depth: 4091-4096m
    Core photo at depth: 4096-4101m
    Core photo at depth: 4101-4106m
    4081-4086m
    4086-4091m
    4091-4096m
    4096-4101m
    4101-4106m
    Core photo at depth: 4106-4107m
    Core photo at depth: 4108-4113m
    Core photo at depth: 4113-4118m
    Core photo at depth: 4118-4123m
    Core photo at depth: 4123-4128m
    4106-4107m
    4108-4113m
    4113-4118m
    4118-4123m
    4123-4128m
    Core photo at depth: 4128-4133m
    Core photo at depth: 4133-4138m
    Core photo at depth: 4138-4143m
    Core photo at depth: 4143-4148m
    Core photo at depth: 4148-4153m
    4128-4133m
    4133-4138m
    4138-4143m
    4143-4148m
    4148-4153m
    Core photo at depth: 4153-4158m
    Core photo at depth: 4158-4160m
    Core photo at depth: 4168-4173m
    Core photo at depth: 4173-4178m
    Core photo at depth: 4178-4183m
    4153-4158m
    4158-4160m
    4168-4173m
    4173-4178m
    4178-4183m
    Core photo at depth: 4183-4188m
    Core photo at depth: 4188-4193m
    Core photo at depth: 4193-4198m
    Core photo at depth: 4198-4203m
    Core photo at depth: 4203-4208m
    4183-4188m
    4188-4193m
    4193-4198m
    4198-4203m
    4203-4208m
    Core photo at depth: 4208-4213m
    Core photo at depth: 4213-4213m
    Core photo at depth: 4429-4434m
    Core photo at depth: 4434-4439m
    Core photo at depth: 4439-4444m
    4208-4213m
    4213-4213m
    4429-4434m
    4434-4439m
    4439-4444m
    Core photo at depth: 4444-4445m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    4444-4445m

  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    0.88
    pdf
    5.66

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BHC GR
    3966
    4060
    BHC GR
    3966
    4535
    CBL VDL GR
    3780
    4530
    DITE BHC LDT CNT GR AMS
    3870
    4335
    MWD DPR - GR
    3956
    4710
    RFT HP GR AMS
    4053
    4438
    RFT HP GR AMS
    4422
    4422
    RFT HP GR AMS
    4426
    4426
    VSP
    3540
    4480

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    26
    463.0
    30
    464.0
    0.00
    LOT
    INTERM.
    20
    1153.0
    24
    1409.0
    1.65
    LOT
    INTERM.
    13 3/8
    2548.0
    17 1/2
    2551.0
    1.94
    LOT
    INTERM.
    9 5/8
    3955.0
    12 1/4
    3956.0
    1.62
    LOT
    LINER
    7
    4530.0
    8 1/2
    4724.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    510
    1.12
    11.0
    water based
    887
    1.18
    12.0
    water based
    1327
    1.20
    18.0
    water based
    1409
    1.20
    15.0
    water based
    1752
    1.39
    23.0
    water based
    1975
    1.60
    30.0
    water based
    2524
    1.62
    35.0
    water based
    2551
    1.61
    47.0
    oil based
    2697
    1.62
    35.0
    oil based
    3034
    1.62
    35.0
    oil based
    3296
    1.62
    59.0
    oil based
    3679
    1.61
    50.0
    oil based
    3956
    1.55
    35.0
    oil based
    4027
    1.20
    24.0
    oil based
    4236
    1.23
    27.0
    oil based
    4724
    1.23
    28.0
    oil based

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22