Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

31/2-13 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    31/2-13 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    31/2-13
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    81 007-412 SP 337.5 & 82-430 SP 102
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    A/S Norske Shell
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    401-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    74
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    02.01.1984
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    15.03.1984
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    15.03.1986
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    19.12.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    SOGNEFJORD FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    333.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2010.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1727.6
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    46.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    60
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    FENSFJORD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 47' 14.15'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 26' 3.43'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6739329.73
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    523646.72
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    93

  • Wellbore history
    General
    Well 31/2-13 S was drilled as an appraisal in the Troll West oil province in the Northern North Sea. The main objectives of were to investigate the reservoir properties and accumulation conditions between the wells 31/2-5 and 31/2-11. Water and/or gas -coning tests were to be conducted.
    Operations and results
    Appraisal well 31/2-13 S was spudded with the semi-submersible installation Borgny Dolphin on 2 January 1984 and drilled to TD at 2010 m in the Middle Jurassic Fensfjord Formation. Due to bad weather the string parted and was observed lying across the temporary guide base when the well was spudded. The fish was recovered. Straight hole was drilled down to 500 m where the hole was kicked off with an angle of 1 1/2 degree. Some problems due to tight hole occurred in the 17 1/2" hole. Mud losses to the formation occurred at 1531 and 1700 m, 100 bbls at each depth. A drill break occurred at 1744 m in the 12 1/4" hole section. The well was drilled with seawater and viscous pills down to 473 m, with Gelled mud from 473 m from 473 m to 750 m, with seawater from 750 m to 825 m, and with oil based mud from 825 m to TD. The Oil based mud used was termed "Fazekleen, low toxicity invert oil emulsion mud, based on Shell Sol D70 oil"
    Top reservoir (top Sognefjord Formation) was penetrated at 1732 m (1526.5 m TVD), top Heather Formation at 1855 m (1613 m TVD), and top Fensford Formation sandstone at 1934 m (1671 m TVD). Oil and gas were encountered in the Sognefjord Formation. The GOC was at 1790 m (1567 m TVD) and the FWL was estimated at 1828.5 m (1594 m TVD). Strong to moderate fluorescence was observed on the cores down to 1844 m (1606 m TVD), but heavy contamination from the oil-based mud made shows detection somewhat uncertain. The upper half of the oil bearing formation consisted of generally clean sandstones. Below 1555 m TVD the sands were micaceous. Tight calcareous streaks occurred over the whole section. The core permeability in the clean sands ranged from 4 D to 15 D. In the micaceous sands the permeability were from 10 mD to 100 mD.
    Eight fibreglass sleeve cores were cut from 1744 to 1844 m in the Sognefjord Formation sands. Seventy metres (70%) were recovered. An RFT segregated fluid sample was taken in the oil zone at 1800 m.
    The well was permanently abandoned on 15 March 1984 as a gas and oil appraisal well.
    Testing
    A Production test was performed through a 5" production tubing in the Late Jurassic sequence. During clean-up producing 810 Sm3 oil/day gas cap gas broke through. The well was then produced at rates up to 604 Sm3/day. The gas-oil ratio increased from solution GOR (57 Sm3/Sm3) to 552 Sm3/Sm3. The produced oil had a gravity 0.88 - 0.89 G7cm3 (28 deg API), the gas 0.70-0.63 (air = 1). No formation water produced. The estimated critical rate (to gas coning) in 31/2-13, ca 315 Sm3/day, was significantly lower than in 31/2-5 (795 Sm3/day). Maximum down-hole temperature recorded in the production test was 65.2 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    480.00
    2006.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1744.0
    1754.0
    [m ]
    2
    1754.0
    1757.0
    [m ]
    3
    1772.0
    1782.0
    [m ]
    4
    1784.0
    1795.0
    [m ]
    5
    1795.0
    1807.0
    [m ]
    6
    1807.0
    1813.0
    [m ]
    7
    1813.0
    1824.0
    [m ]
    8
    1825.0
    1840.7
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    78.7
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 1744-1756m
    Core photo at depth: 1756-1774m
    Core photo at depth: 1774-1778m
    Core photo at depth: 1778-1781m
    Core photo at depth: 1781-1786m
    1744-1756m
    1756-1774m
    1774-1778m
    1778-1781m
    1781-1786m
    Core photo at depth: 1786-1789m
    Core photo at depth: 1789-1793m
    Core photo at depth: 1793-1796m
    Core photo at depth: 1796-1800m
    Core photo at depth: 1800-1803m
    1786-1789m
    1789-1793m
    1793-1796m
    1796-1800m
    1800-1803m
    Core photo at depth: 1803-1807m
    Core photo at depth: 1807-1811m
    Core photo at depth: 1811-1814m
    Core photo at depth: 1814-1817m
    Core photo at depth: 1818-1822m
    1803-1807m
    1807-1811m
    1811-1814m
    1814-1817m
    1818-1822m
    Core photo at depth: 1822-1825m
    Core photo at depth: 1826-1829m
    Core photo at depth: 1829-1832m
    Core photo at depth: 1833-1837m
    Core photo at depth: 1837-1839m
    1822-1825m
    1826-1829m
    1829-1832m
    1833-1837m
    1837-1839m

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST1
    1801.00
    1806.00
    OIL
    03.03.1984 - 00:00
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    358
    783
    1460
    1460
    1540
    1577
    1718
    1728
    1732
    1732
    1855
    1934

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    PDF
    7.74
    pdf
    5.93
    pdf
    0.10
    pdf
    0.72
    pdf
    2.16
    pdf
    1.50
    pdf
    1.03
    pdf
    0.43
    pdf
    0.26
    pdf
    1.63
    pdf
    6.68
    pdf
    5.80
    pdf
    2.66
    pdf
    2.27
    pdf
    0.72
    pdf
    0.91
    pdf
    0.87
    pdf
    0.83
    pdf
    0.44
    pdf
    0.14
    pdf
    1.74
    pdf
    0.20
    pdf
    0.26
    pdf
    0.15
    pdf
    0.77
    pdf
    2.45
    pdf
    0.72
    pdf
    26.29

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1801
    1807
    21.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    60
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    540
    144180
    0.880
    0.630
    267

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL GR
    635
    1697
    CBL VDL GR
    1450
    1968
    CST
    0
    0
    DIL BHC GR
    805
    1675
    DIL LSS GR
    1699
    2006
    ISF BHC GR
    455
    823
    LDL CNL GR
    804
    1677
    LDL CNL GR
    1699
    2007
    LDT CNL GR
    455
    825
    NGS
    1699
    2007
    RFT
    1800
    1800
    RFT GR HP
    1750
    1992
    VELOCITY
    455
    2006

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    455.5
    36
    468.0
    0.00
    LOT
    SURF.COND.
    20
    806.0
    26
    813.0
    1.81
    LOT
    INTERM.
    13 3/8
    1700.0
    17 1/2
    1710.0
    1.61
    LOT
    INTERM.
    9 5/8
    1999.0
    12 1/4
    2007.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    500
    1.05
    WATER BASED
    550
    1.07
    WATER BASED
    600
    1.10
    WATER BASED
    800
    1.12
    WATER BASED
    830
    1.30
    OIL BASED
    900
    1.31
    OIL BASED
    1140
    1.40
    OIL BASED
    1550
    1.41
    OIL BASED
    1750
    1.25
    OIL BASED

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.17