Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/8-2

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/8-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/8-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST04M01-inline1965 & xline 3475
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1372-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    60
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    20.08.2011
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    21.10.2011
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    21.10.2013
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    21.10.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    119.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4386.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4382.5
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    8.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    143
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SLEIPNER FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 24' 55.1'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 32' 49.9'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6476013.73
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    415122.23
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6681
  • Wellbore history

    General
    The 15/8-2 well was drilled in the Ve sub-basin, west of the Sleipner Field and ca 3 km from the UK border in the North Sea. The primary objective was to prove a commercial hydrocarbon accumulation within Upper and Lower Hugin Formation. The secondary objectives were to test possible hydrocarbon presence within the Sleipner Formation and leads in the Hod Formation (Goldfinger lead) and Late Jurassic.
    Operations and results
    Well 15/8-2 was spudded with the semi-submersible installation COSLPioneer on 20 August 2011 and drilled to TD at 4386 m in the Middle Jurassic Sleipner Formation. Before spud, a shallow gas class 1 warning was given. A 9 7/8" pilot hole was drilled from 208.5 to 1100 m. However, no shallow gas was observed by the ROV at the wellhead or by the MWD during drilling. No significant problem was encountered in the operations. The well was drilled with Seawater and bentonite hi-vis sweeps down to 1133 m, with Glydril mud from 1133 m to 2419 m, and with Versatec OBM from 2419 m to TD.
    The well penetrated rocks of Quaternary, Tertiary, Cretaceous, and Jurassic age. No hydrocarbon indications were observed in the Hod Formation (Goldfinger) and only thin sandstone stringers were observed in the Late Jurassic. The main target Upper Hugin Formation was encountered at 3881.5 m, 31 m higher than prognosed, and the Lower Hugin Formation came in at 4065 m, 1 m shallower than prognosed. The secondary target Sleipner Formation was encountered at 4238 m, i.e. 61 m deeper than prognosed. No movable hydrocarbons were proven in the well.
    Shows: Bright yellowish direct fluorescence, and a slow streaming cloudy bluish white cut fluorescence was recorded in siltstones in the Draupne Formation in the interval from 3812 m to 3818 m and Heather Formation from 3845 m to 3857 m. In the Hugin Formation sandstones questionable shows (oil-based mud?) were recorded in the intervals from 3881 m to 3911 m and 4013m to 4120m.
    No cores were cut. The MDT tool was run for pressure and fluid sampling. Four water samples were taken at 4011 m.
    The well was permanently abandoned on 21 October 2011 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1140.00
    4385.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    DSI PEX GR
    3708
    4381
    MDT GR
    3888
    4363
    MDT GR
    3912
    3913
    MWD - ARC PP
    2419
    3706
    MWD - ARC TELE
    208
    1133
    MWD - GVR PERI TELE
    3706
    4386
    MWD - LWD - ARC PP
    208
    1100
    MWD - PD ARC PP
    1133
    2419
    MWD - TELE DIR
    144
    208
    USIT CBL GR
    3110
    3708
    VSP GR
    195
    4350
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    204.5
    36
    209.0
    0.00
    LOT
    PILOT HOLE
    1100.0
    9 7/8
    1100.0
    0.00
    LOT
    SURF.COND.
    20
    1127.7
    26
    1133.0
    1.44
    LOT
    INTERM.
    13 3/8
    2409.8
    17 1/2
    2419.0
    1.72
    LOT
    INTERM.
    9 5/8
    3708.0
    12 1/4
    3708.0
    1.55
    LOT
    OPEN HOLE
    4386.0
    8 1/2
    4386.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1133
    1.35
    14.0
    Spud Mud
    1136
    1.22
    12.0
    Glydril
    1215
    1.22
    13.0
    Glydril
    1820
    1.22
    13.0
    Glydril
    2379
    1.32
    9.0
    Glydril
    2419
    1.35
    18.0
    Glydril
    2985
    1.30
    31.0
    Versatec
    3188
    1.30
    30.0
    Versatec
    3236
    1.30
    32.0
    Versatec
    3650
    1.30
    34.0
    Versatec
    3706
    1.30
    30.0
    Versatec
    3849
    1.41
    40.0
    Versatec
    4340
    1.41
    35.0
    Versatec
    4386
    1.41
    32.0
    Versatec