Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7220/11-3

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7220/11-3
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7220/11-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN12M01 inline 29006 crossline 24350
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1570-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    81
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.06.2015
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    02.09.2015
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    02.09.2017
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    02.09.2017
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    NO FORMAL NAME
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY PERMIAN
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    ØRN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    30.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    397.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1922.5
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1920.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    7.9
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ØRN FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    72° 1' 12.62'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    20° 31' 41.23'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    8000137.25
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    690231.43
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    33
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7714
  • Wellbore history

    General
    Well 7220/11-3 was drilled to appraise the Alta discovery, about four kilometres south of discovery well 7220/11-1 and approximately 3 kilometres northeast of appraisal wells 7220/11-2 and 7220/11-2 A. The Alta discovery lie on the southern part of the Loppa High in the Barents Sea and comprises a structural trap with closures at the Permian-Triassic and Basement levels. The primary appraisal objectives were to confirm the presence of hydrocarbon columns and fluid contacts in a crestal position of the structure, and to test the reservoir properties of the Permian carbonates.
    Operations and results
    Appraisal well 7220/11-3 was spudded with the semi-submersible installation Island Innovator on 14 June 2015. During coring in karstified chalk and limestone at 1954 m, the core bit ran into a cavern of unknown size. The string suddenly dropped 2 meters with no WOB. Total fluid losses occurred at a loss rate of 60 m3/hr. The well was shut in with seawater in the annulus and a full well control incident occurred. The drill string was shot-off, leaving the core barrel in the hole. The main bore was drilled with seawater and hi-vis pills down to 598 m and with Aqua-Drill mud from 598 m to 1956 m, which became TD. The main wellbore was plugged back to the 13 3/8" casing shoe and a technical sidetrack, 7220/11-3 T2, was kicked off from 1087 m to secure missing data. The sidetrack was drilled to a total depth of 1922.5 m (1920 m TVD) in the Permian Ørn Formation. The technical sidetrack well 7220/11-3 T2 was drilled with Aqua-Drill mud from kick-off to TD.
    Well 7220/11-3 encountered a 75-metre thick gas column and the upper part of an oil column in carbonates in the Gipsdalen Group of good to very good reservoir quality. The reservoir conglomerate was encountered at 1834.5 m (1832.0 m TVD) and the underlying carbonates at 1856 m (1853.5 m TVD). Due to concerns of further severe losses, the technical sidetrack was not drilled to a sufficient depth to penetrate the expected FWL, however, wireline pressures, fluid gradients and samples were acquired in the gas and oil zones suggesting a GOC at 1912.5 m (1910 m TVD). Fluid gradients and pressures were comparable with those acquired in the discovery well. Residual oil shows were observed in the main well bore at 645 to 650 m, 860 to 936 m, 1093 to 1202 m, and 1295 to 1650 m. In the sidetrack similar shows were observed, in addition to shows on cores from the Kobbe and Klappmyss formations (1820 - 1824 m and 1832 to 1834.5 m respectively), and in the reservoir Triassic conglomerates and Permian Carbonates.
    A total of 11 cores were attempted of which 10 were recovered. Cores 1 to 10 were cut in succession from 1814 to 1945.9 m in the main bore with 98% total recovery. The last core was lost in hole because of severe mud losses. Wire line logs were run in the sidetrack where MDT fluid samples were taken at 1919.7 m (oil), 1912 m (gas), and at 1841.9 m (gas).
    The well was plugged back to 1016 m on 2 September 2015 as an oil and gas appraisal well. A geological sidetrack well 7220/11-3 A followed for further drilling and testing.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    610.00
    1946.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1814.0
    1826.9
    [m ]
    2
    1827.2
    1852.2
    [m ]
    3
    1852.2
    1863.1
    [m ]
    4
    1863.2
    1881.8
    [m ]
    5
    1882.2
    1886.6
    [m ]
    6
    1886.9
    1893.7
    [m ]
    7
    1893.9
    1901.3
    [m ]
    8
    1902.2
    1928.7
    [m ]
    9
    1928.7
    1935.9
    [m ]
    10
    1936.1
    1945.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    129.3
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD - GR PWD RES DIR AC
    498
    598
    MWD - PWD DIR
    498
    598
    MWD - PWD GR DIR
    427
    498
    MWD - RES GR PWD DIR AC
    598
    1080
    MWD - RES GR PWD DIR CAL DEN NEU
    1077
    1767
    MWD - RES GR PWD DIR EDEN CAL NE
    1767
    1814
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    493.6
    36
    494.0
    0.00
    SURF.COND.
    20
    590.1
    26
    598.0
    1.41
    LOT
    PILOT HOLE
    598.0
    9 7/8
    598.0
    0.00
    INTERM.
    13 3/8
    1077.0
    17 1/2
    1085.0
    1.40
    LOT
    INTERM.
    9 5/8
    1766.4
    12 1/4
    1774.0
    1.60
    FIT
    OPEN HOLE
    1922.5
    8 1/2
    1922.5
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    450
    1.40
    16.0
    Water Based
    463
    1.03
    2.0
    Water Based
    498
    1.03
    20.0
    Water Based
    498
    1.50
    17.0
    Water Based
    598
    1.20
    12.0
    Water Based
    598
    1.03
    20.0
    Water Based
    705
    1.15
    12.0
    Water Based
    1080
    1.16
    9.0
    Water Based
    1094
    1.20
    11.0
    Water Based
    1358
    1.20
    12.0
    Water Based
    1515
    1.15
    13.0
    Water Based
    1532
    1.20
    13.0
    Water Based
    1746
    1.15
    12.0
    Water Based
    1850
    1.15
    9.0
    Water Based
    1920
    1.16
    11.0
    Water Based