Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/8-21 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/8-21 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/8-21
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    PGS20M05VIK. IL 36361. XL 132580
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    MOL Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1857-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    39
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.05.2021
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    20.06.2021
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    20.06.2021
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    20.06.2023
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    12.09.2023
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    SKAGERRAK FM
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BASEMENT
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    40.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    128.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2703.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2627.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    20.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    105
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PRE-DEVONIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 19' 44.75'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 20' 25.1'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6577036.33
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    462459.85
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    9309
  • Wellbore history

    General
    Well 25/8-21 S was drilled to appraise the Skagerrak Formation Iving oil discovery made in well 25/8-19 S and 25/8-19 A. The Iving discovery is located at the northern part of the Utsira High in the North Sea. The primary objective of the appraisal well was to establish the oil-water contact in the Triassic Skagerrak Formation in Segment 1 of the Iving structure. The well was planned to penetrate 50 m into pre-Permian basement.
    Operations and results
    Appraisal well 25/8-21 S was spudded with the semi-submersible installation Transocean Barents on 13 May 2021 and drilled to TD at 2703 m (2627 m TVD) m in Basement rock. The well is vertical down to 1000 m, building to a ca 19 sail angle from ca 1450 m to TD. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 1040 m and with Innovert oil-based mud from 1040 m to TD.
    Top Skagerrak Formation/BCU was penetrated at 2390.5 m. The middle Skagerrak Formation contained gas over oil in sandstones of poor to good reservoir quality. The gas/oil and oil/water contacts were derived from pressure gradients to be at 2511.5 m (2445.5 m TVD) and 2534.3 m (2467.4 m TVD), respectively. Pressure data indicates communication in the Skagerrak reservoir between the discovery (25/8-19 S & A) and the appraisal well.
    Oil was also encountered in the lower part of the Skagerrak Formation with an oil sample at 2633 m (2561 m TVD), and a separate oil column of about 50 metres was encountered in basement rock. The reservoir properties in the Lower Skagerrak and in the Basement was poor and hydrocarbon contacts were not established. Oil shows, mostly discontinuous, were recorded from 2522 m and downwards to 2641 m, the strongest were in the upper part down to 2585 m.
    Two cores were cut in succession from 2483 to 2593 m in the Skagerrak Formation. Core recoveries were 99.64% and 100% respectively for core 1 and 2. The core-log depth shift is -0.7 m for Core 1 and -1.2 m for core 2. RDT fluid samples were taken at 2507.32 m (gas), 2524.91 m (oil), 2543.94 m (water), 2559.75 m (water), and 2633.24 m (oil).
    The well was permanently abandoned on 20 June 2021 as an oil and gas appraisal well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1060.00
    2703.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2483.0
    2537.8
    [m ]
    2
    2538.0
    2593.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    109.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CSNG GEM XMR
    2240
    2703
    HRSCT
    2010
    2441
    LWD - GR RES DIR PWD
    233
    1040
    LWD - GR RES DIR PWD DEN NEU CAL
    2441
    2703
    LWD - GR RES DIR PWD DN NE SO CA
    2010
    2441
    LWD - GR RES DIR SON PWD
    167
    1040
    LWD - GR RES DIR SON PWD
    1040
    2010
    RDT DPS
    2010
    2441
    RDT DPS EPS SPS
    2507
    2674
    VSP
    1735
    2635
    XSI HFB16 CAST
    2368
    2703
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    30
    233.2
    36
    233.2
    0.00
    INTERM.
    20
    1032.8
    26
    1040.0
    1.50
    FIT
    INTERM.
    13 5/8
    2004.5
    16
    2010.0
    1.59
    LOT
    LINER
    9 5/8
    2440.0
    12 1/4
    2441.0
    2.03
    FIT
    OPEN HOLE
    2524.0
    8 1/2
    2524.0
    2.33
    FIT
    OPEN HOLE
    2703.0
    8 1/2
    2703.0
    0.00
    FIT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    168
    1.04
    36.0
    Oil
    168
    1.04
    36.0
    Water
    217
    1.03
    1.0
    Water
    234
    1.04
    73.0
    Water
    350
    1.31
    11.0
    Oil
    568
    1.04
    36.0
    Water
    1040
    1.31
    6.2
    Oil
    1040
    1.30
    23.0
    Water
    1043
    1.31
    6.7
    Oil
    2410
    1.22
    15.0
    Oil
    2441
    1.14
    17.0
    Oil
    2703
    1.14
    15.0
    Oil