Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/11-3

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/11-3
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/11-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ANO 75-12 .SP 160
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Amoco Norway Oil Company
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    184-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    55
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.10.1977
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.12.1977
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    03.12.1979
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    22.03.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    36.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    72.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3052.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    89
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    RØDBY FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 10' 53.74'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 27' 51.78'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6226525.75
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    528827.92
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    286

  • Wellbore history
    General
    Well 2/11-3 is located 2.5 km due east from 2/11-2 and 6.5 km south-southeast from the Valhall well 2/11-1. The primary objective of well 2/11-3 was the Late Cretaceous chalk section on the western flank of the East Lobe of the Hod structure. The West Lobe was found to be oil bearing by 2/11-2 in 1974. Seismic indicated an expansion of the chalk section compared to 2/11-2 and that the graben feature found on Valhall extended south-eastward over the East Hod and therefore the possibility for the high reservoir quality Maestrichtian rock to be present in this area.
    Operations and results
    Well 2/11-3 was spudded with the jacket 4 legs installation Dyvi Beta on 10 October 1977 and drilled to TD at 3052 m in the Early Cretaceous Rødby Formation. The well was drilled in a total of 47 days without any major drilling problems. However, 3 days were spent waiting for the correct Cameron BOP Adaptor Spool.
    Well 2/11-3 proved the Hod complex to consist of two individual structures. A domal West Hod structure has a seismically defined closure area of 7.5 square km. East Hod, where 2/11-3 was located, is a northwest-southeast trending anticline covering approximately 6 square km.
    The well penetrated a normal sequence of Quarternary-Tertiary section from the surface to the top of the Late Cretaceous at 2774.5 m. This interval typically consists of predominantly clay and shale with thin stringers of limestone and dolomite scattered throughout. The basal Tertiary unit is marked by the occurrence of the Paleocene Ash marker that displays the characteristic metallic blue grey-violet colour of the volcanic tuff. This correlative unit was encountered at 2714.5 m and is 18 meters thick. The chalk section was found to be 247 meters thick compared to 112 meters in 2/11-2 and 258 meters in 2/11-1. There were no hydrocarbon-bearing formations in the well. The top three meters of the chalk section showed patchy, orange yellow fluorescence. Further below only traces of orange yellow, residual oil fluorescence were occasionally seen, normally associated with an increase in total gas readings. Otherwise no oil shows were recorded in the well.
    Three conventional cores were cut at the top chalk section, from 2776.5 m to 2811.0 m. No wire line fluid samples were taken.
    The well was permanently abandoned on 3 December 1977 as a dry well with shows.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    150.00
    3051.60

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2776.0
    2792.0
    [m ]
    2
    2789.0
    2789.5
    [m ]
    3
    2792.0
    2811.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    35.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 2776-2779m
    Core photo at depth: 2779-2782m
    Core photo at depth: 2785-2788m
    Core photo at depth: 2788-2791m
    Core photo at depth: 2789-2789m
    2776-2779m
    2779-2782m
    2785-2788m
    2788-2791m
    2789-2789m
    Core photo at depth: 2791-2792m
    Core photo at depth: 2792-2795m
    Core photo at depth: 2795-2798m
    Core photo at depth: 2798-2801m
    Core photo at depth: 2801-2804m
    2791-2792m
    2792-2795m
    2795-2798m
    2798-2801m
    2801-2804m
    Core photo at depth: 2804-2807m
    Core photo at depth: 2807-2810m
    Core photo at depth: 2810-2811m
    Core photo at depth:  
    Core photo at depth:  
    2804-2807m
    2807-2810m
    2810-2811m

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    108
    1515
    2714
    2714
    2727
    2747
    2775
    2775
    3022
    3022

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    2.61
    pdf
    46.03

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL CCL
    185
    1258
    CBL VDL CCL TT
    1573
    2715
    CBL VDL TT
    185
    1215
    CONT-DIP
    1286
    2749
    CONT-DIP
    2737
    3049
    DLL MSFL SP GR CAL
    2737
    3048
    FDC CNL GR CAL
    2737
    3048
    ISF SON SP GR
    169
    409
    ISF SON SP GR
    406
    1278
    ISF SON SP GR CAL
    1286
    2749
    ISF SON SP GR CAL
    2737
    3048
    TEMP
    1
    2197
    VELOCITY
    145
    3010

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    170.0
    36
    170.0
    0.00
    LOT
    SURF.COND.
    20
    408.0
    26
    412.0
    0.00
    LOT
    INTERM.
    13 3/8
    1286.0
    17 1/2
    1287.0
    0.00
    LOT
    INTERM.
    9 5/8
    2740.0
    12 1/4
    2749.0
    0.00
    LOT
    OPEN HOLE
    3052.0
    8 1/2
    3052.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    325
    1.07
    waterbased
    1021
    1.25
    waterbased
    1287
    1.30
    waterbased
    1715
    1.79
    waterbased
    2525
    1.79
    waterbased
    3051
    1.79
    waterbased