Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/8-7

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/8-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    SUSPENDED
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/8-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    NH 9001- REKKE 809 & KOLONNE 1200
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    725-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    118
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    21.03.1992
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    16.07.1992
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    16.07.1994
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    24.09.2003
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    COOK FM
    3rd level with HC, age
    Age of lithostratigraphic unit, 3rd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    3rd level with HC, formation
    Name of lithostartigraphic unit, 3rd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    STATFJORD GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    335.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    5460.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    5441.4
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    12.8
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    181
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LUNDE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 19' 9.07'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 33' 32.15'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6798582.22
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    476383.07
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1941

  • Wellbore history
    General
    Well 34/8-7 is located on the western flank of the Tampen Spur and is situated approximately 7.4 kilometres due east of well 34/8-4S, in the Visund prospect. This was the third exploration well to be drilled in the licence area. The primary objective of well 34/8-7 was to test the Jurassic Brent Group and Statfjord Formation in the hanging wall of the Visund Fault. The secondary objectives were to establish a good seismic to well correlation and to fulfil licence obligations.
    Operations and results
    Exploration well 34/8-7 was spudded with the semi-submersible rig "Polar Pioneer" on 21 March 1992 and drilled to TD at 5460 m in the Triassic Hegre Group. The well was drilled with spud mud down to 1444 m and with KCl/PHPA/Polymer mud from 1444 m to 3288 m. From 3288 m the mud system was gradually changed to a HTHP (high temperature stable polymers) mud. Still, towards TD of the well it was evident that some of the chemical/polymers was decomposing and forming carbonates.
    Conglomeratic density flow deposits (Intra Draupne Formation sandstone) were found in the upper part of the Draupne Formation. From a gross thickness of 134.5m, 5.75m of net sand were identified of which 5.25m were regarded as net pay. An average porosity value 9.4% and average Sw of 50.1% were computed for the pay section. A core cut in the Intra Draupne sandstone gave 5.2 % core porosity on average.
    The primary objective Brent Group was encountered at 4632.5 m. The entire Brent Group was interpreted as being gas bearing. From a gross thickness of 134.5m, 36.5m of net sand were recognised with 36.5m of net pay. An average porosity of 9.8% and average Sw of 30.4% were determined. A core cut in the Brent Group, gave an average porosity of 9.9 %. The sandy member of Cook Formation was found to be gas bearing, but poor reservoir properties reduced the net pay to only 2.0 m with an average porosity of 8.3 % and average Sw of 36.1 %.
    No net pay was identified in the Amundsen sand.
    The Statfjord Formation came in at 5118 m. It was 88.5 m thick of which 22.5 m was net sand and 18.75 m was identified as net gas bearing pay. Cores cut in the Statfjord Formation gave an average core porosity of 7.1 % porosity.
    A total of five cores were cut in isolated intervals throughout the well. Core number 1 was cut in the Intra Draupne Sandstone, core number 2 was cut in the Tarbert and Ness Formations, cores number 3 and 4 were cut in the Statfjord Formation, while core number 5 was cut in the Hegre Group. Attempts to take RFT pre-test in the Draupne equivalent conglomerate proved to be unsuccessful due to the tight nature of the Formation. Because of hole washouts and high down hole temperature and pressure anomalies, no RFT pressure measurements could be obtained in the Brent Group and Statfjord Formations.
    After running the liner as part of preparing for drill stem testing, "Polar Pioneer" had to be released for other purposes. The well was therefore suspended on 16 July 1992 with the provision that testing of the reservoir zones would be performed at a later date. The well was re-entered (34/8-7 R) with the semi-submersible installation "Polar Pioneer" on 19 November 1992 for testing. It was permanently abandoned as a gas discovery on 10 February 1993.
    Testing
    Well 34/8-7 R was tested in two intervals. In Test 1 in the Statfjord Formation (5117.8 m ? 5210.0 m) no production was achieved. Test 2 in the Brent Group (4671.7 m ? 4731.0 m) produced gas.
    <

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1450.00
    5460.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4471.0
    4491.4
    [m ]
    2
    4654.0
    4656.8
    [m ]
    3
    5118.0
    5118.3
    [m ]
    4
    5127.0
    5132.3
    [m ]
    5
    5422.0
    5429.9
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    36.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 4471-4476m
    Core photo at depth: 4476-4481m
    Core photo at depth: 4481-4486m
    Core photo at depth: 4486-4491m
    Core photo at depth: 4491-4491m
    4471-4476m
    4476-4481m
    4481-4486m
    4486-4491m
    4491-4491m
    Core photo at depth: 4648-4653m
    Core photo at depth: 4653-4656m
    Core photo at depth: 5118-5129m
    Core photo at depth: 5129-5132m
    Core photo at depth: 5422-5427m
    4648-4653m
    4653-4656m
    5118-5129m
    5129-5132m
    5422-5427m
    Core photo at depth: 5427-5429m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    5427-5429m

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2694.0
    [m]
    SWC
    HYDRO
    3470.5
    [m]
    SWC
    HYDRO
    3484.0
    [m]
    SWC
    HYDRO
    3492.5
    [m]
    SWC
    HYDRO
    3506.0
    [m]
    SWC
    HYDRO
    3538.0
    [m]
    SWC
    HYDRO
    3549.5
    [m]
    SWC
    HYDRO
    3565.5
    [m]
    SWC
    HYDRO
    3580.0
    [m]
    SWC
    HYDRO
    3597.0
    [m]
    SWC
    HYDRO
    3608.0
    [m]
    SWC
    HYDRO
    3625.0
    [m]
    SWC
    HYDRO
    3646.0
    [m]
    SWC
    HYDRO
    3660.0
    [m]
    SWC
    HYDRO
    3670.0
    [m]
    SWC
    HYDRO
    3685.0
    [m]
    SWC
    HYDRO
    3709.0
    [m]
    SWC
    HYDRO
    3740.0
    [m]
    SWC
    HYDRO
    3754.5
    [m]
    SWC
    HYDRO
    3763.0
    [m]
    SWC
    HYDRO
    3777.0
    [m]
    SWC
    HYDRO
    3794.0
    [m]
    SWC
    HYDRO
    3800.0
    [m]
    SWC
    HYDRO
    3841.5
    [m]
    SWC
    HYDRO
    3855.0
    [m]
    SWC
    HYDRO
    3986.0
    [m]
    SWC
    HYDRO
    4013.0
    [m]
    SWC
    HYDRO
    4043.0
    [m]
    SWC
    HYDRO
    4155.0
    [m]
    SWC
    HYDRO
    4207.0
    [m]
    SWC
    HYDRO
    4227.0
    [m]
    SWC
    HYDRO
    4261.0
    [m]
    SWC
    HYDRO
    4278.0
    [m]
    SWC
    HYDRO
    4322.0
    [m]
    SWC
    HYDRO
    4337.0
    [m]
    SWC
    HYDRO
    4352.0
    [m]
    SWC
    HYDRO
    4379.0
    [m]
    SWC
    HYDRO
    4396.0
    [m]
    SWC
    HYDRO
    4402.0
    [m]
    SWC
    HYDRO
    4457.0
    [m]
    SWC
    HYDRO
    4471.5
    [m]
    C
    HYDRO
    4474.3
    [m]
    C
    HYDRO
    4476.0
    [m]
    C
    OD
    4476.5
    [m]
    C
    HYDRO
    4478.0
    [m]
    C
    HYDRO
    4478.0
    [m]
    C
    OD
    4479.0
    [m]
    C
    HYDRO
    4481.5
    [m]
    C
    HYDRO
    4482.5
    [m]
    C
    HYDRO
    4485.1
    [m]
    C
    HYDRO
    4486.0
    [m]
    C
    OD
    4487.6
    [m]
    C
    HYDRO
    4490.0
    [m]
    C
    HYDRO
    4490.0
    [m]
    C
    OD
    4522.5
    [m]
    SWC
    HYDRO
    4574.0
    [m]
    SWC
    HYDRO
    4645.8
    [m]
    C
    HYDRO
    4649.8
    [m]
    C
    HYDRO
    4652.0
    [m]
    C
    OD
    4652.1
    [m]
    C
    HYDRO
    4654.0
    [m]
    C
    OD
    4656.0
    [m]
    C
    OD
    4656.8
    [m]
    C
    OD
    4850.0
    [m]
    DC
    OD
    4900.0
    [m]
    DC
    OD
    4950.0
    [m]
    DC
    OD
    5000.0
    [m]
    DC
    OD
    5050.0
    [m]
    DC
    OD
    5100.0
    [m]
    DC
    OD
    5118.2
    [m]
    C
    HYDRO
    5127.7
    [m]
    C
    HYDRO
    5132.2
    [m]
    C
    OD
    5132.2
    [m]
    C
    HYDRO
    5150.0
    [m]
    DC
    OD
    5200.0
    [m]
    DC
    OD
    5231.0
    [m]
    DC
    OD

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.71

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.93
    pdf
    0.36

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    17.95

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CST GR
    3470
    3855
    CST GR
    3986
    4866
    DIL LSS GR SP AMS
    4813
    5236
    DIL LSS LDL CNL NGT SP AMS
    3210
    3855
    DIL LSS LDL CNL NGT SP AMS
    3949
    4900
    DIL LSS SP GR AMS
    1436
    3285
    DLL GR AMS
    4300
    4898
    DLL MSFL CAL GR AMS
    5168
    5467
    DLL MSFL GR AMS
    4810
    5224
    FMS-4 CAL GR AMS
    5250
    5463
    FMS-4 GR
    4783
    5232
    FMS-4 GR AMS
    3949
    4900
    LDL CNL CAL GR AMS
    5166
    5438
    LDL CNL NGT AMS
    4823
    5225
    MSFL GR AMS
    4300
    4893
    MSFL GR AMS
    4300
    4893
    MWD - GR RES DIR
    368
    4769
    RFT GR AMS
    4398
    4828
    RFT GR AMS
    4466
    4840
    RFT GR AMS
    4699
    5141
    VSP
    3300
    5220

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    444.5
    36
    446.0
    0.00
    LOT
    INTERM.
    18 5/8
    1436.0
    26
    1438.0
    1.65
    LOT
    INTERM.
    13 3/8
    3264.0
    17 1/2
    3270.0
    1.89
    LOT
    INTERM.
    9 5/8
    3945.0
    12 1/4
    3947.0
    2.00
    LOT
    LINER
    7
    5460.0
    8 1/2
    5460.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    445
    1.20
    11.0
    WATER BASED
    506
    1.08
    27.0
    WATER BASED
    1065
    1.08
    25.0
    WATER BASED
    1441
    1.08
    26.0
    WATER BASED
    1750
    1.39
    23.0
    WATER BASED
    2151
    1.39
    27.0
    WATER BASED
    2349
    1.39
    26.0
    WATER BASED
    2483
    1.39
    25.0
    WATER BASED
    2553
    1.39
    26.0
    WATER BASED
    2556
    1.39
    25.0
    WATER BASED
    2664
    1.39
    26.0
    WATER BASED
    2766
    1.39
    27.0
    WATER BASED
    2792
    1.39
    27.0
    WATER BASED
    2800
    1.39
    27.0
    WATER BASED
    2888
    1.39
    27.0
    WATER BASED
    2955
    1.39
    27.0
    WATER BASED
    3009
    1.40
    26.0
    WATER BASED
    3060
    1.39
    27.0
    WATER BASED
    3133
    1.39
    27.0
    WATER BASED
    3153
    1.39
    27.0
    WATER BASED
    3261
    1.39
    25.0
    WATER BASED
    3288
    1.39
    28.0
    WATER BASED
    3332
    1.39
    25.0
    WATER BASED
    3376
    1.39
    25.0
    WATER BASED
    3453
    1.39
    17.0
    WATER BASED
    3533
    1.39
    19.0
    WATER BASED
    3562
    1.39
    22.0
    WATER BASED
    3636
    1.39
    19.0
    WATER BASED
    3712
    1.39
    18.0
    WATER BASED
    3724
    1.39
    18.0
    WATER BASED
    3763
    1.39
    18.0
    WATER BASED
    3839
    1.39
    21.0
    WATER BASED
    3923
    1.39
    20.0
    WATER BASED
    3961
    1.39
    16.0
    WATER BASED
    3961
    1.39
    21.0
    WATER BASED
    4006
    1.39
    18.0
    WATER BASED
    4180
    1.39
    21.0
    WATER BASED
    4337
    1.50
    25.0
    WATER BASED
    4446
    1.50
    22.0
    WATER BASED
    4471
    1.62
    25.0
    WATER BASED
    4474
    1.62
    26.0
    WATER BASED
    4492
    1.62
    26.0
    WATER BASED
    4518
    1.65
    24.0
    WATER BASED
    4568
    1.70
    22.0
    WATER BASED
    4580
    1.76
    28.0
    WATER BASED
    4589
    1.76
    25.0
    WATER BASED
    4605
    1.82
    22.0
    WATER BASED
    4648
    1.82
    23.0
    WATER BASED
    4657
    1.82
    23.0
    WATER BASED
    4725
    1.82
    18.0
    WATER BASED
    4766
    1.82
    25.0
    WATER BASED
    4900
    1.82
    15.0
    WATER BASED
    4947
    1.82
    16.0
    WATER BASED
    4961
    1.82
    17.0
    WATER BASED
    5005
    1.82
    19.0
    WATER BASED
    5041
    1.82
    24.0
    WATER BASED
    5092
    1.82
    26.0
    WATER BASED
    5112
    1.82
    20.0
    WATER BASED
    5127
    1.82
    22.0
    WATER BASED
    5133
    1.82
    28.0
    WATER BASED
    5169
    1.82
    27.0
    WATER BASED
    5227
    1.82
    25.0
    WATER BASED
    5231
    1.82
    28.0
    WATER BASED
    5250
    1.82
    28.0
    WATER BASED
    5302
    1.82
    30.0
    WATER BASED
    5319
    1.82
    28.0
    WATER BASED
    5370
    1.82
    26.0
    WATER BASED
    5403
    1.82
    27.0
    WATER BASED
    5422
    1.82
    26.0
    WATER BASED
    5431
    1.82
    22.0
    WATER BASED
    5460
    1.82
    20.0
    WATER BASED

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    4471.13
    [m ]
    4479.50
    [m ]
    4483.73
    [m ]
    4486.46
    [m ]
    4489.06
    [m ]
    4489.36
    [m ]
    4648.40
    [m ]
    4653.27
    [m ]
    4655.90
    [m ]
    5130.96
    [m ]
    5422.54
    [m ]
    5423.86
    [m ]
    5427.53
    [m ]
    5129.60
    [m ]
    5118.20
    [m ]
    4825.30
    [m ]
    4817.20
    [m ]