Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/3-2

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/3-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    SUSPENDED
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/3-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    702 154 SP. 233
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    256-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    43
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.07.1980
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    15.08.1980
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    15.08.1982
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    17.10.2007
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    186.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    955.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    955.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    35
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIOCENE
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HORDALAND GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 47' 49.23'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 55' 18.06'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6740339.45
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    495736.96
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    203

  • Wellbore history
    General
    Well 30/3-2 is located ca 7 km north of the Oseberg Field in the Northern North Sea. The primary objective of the well was to test sandstones belonging to the Brent and Dunlin group. Secondary objective was sandstones in the Statfjord formation.
    Operations and results
    Wildcat well 30/3-2 was spudded with the semi-submersible installation Deepsea Saga on 4 July 1980. Due to a strike beginning at July 13 drilling was temporary abandoned at 955 m in Miocene sediments of the Hordaland Group. The well was drilled with pre-hydrated gel.
    No cores were cut and no wire line fluid samples were taken.
    The well was suspended on 15 August 1980 and the rig was taken to Bergen. The strike was terminated on 14 August and the rig was back on location on August 29. The well was re-entered and operations resumed, now formally as a new well, 30/3-2 R.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    260.00
    3567.00

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1360.0
    [m]
    DC
    GEOCH
    1390.0
    [m]
    DC
    GEOCH
    1420.0
    [m]
    DC
    GEOCH
    1460.0
    [m]
    DC
    GEOCH
    1490.0
    [m]
    DC
    GEOCH
    1520.0
    [m]
    DC
    GEOCH
    1550.0
    [m]
    DC
    GEOCH
    1590.0
    [m]
    DC
    GEOCH
    1620.0
    [m]
    DC
    GEOCH
    1650.0
    [m]
    DC
    GEOCH
    1680.0
    [m]
    DC
    GEOCH
    1710.0
    [m]
    DC
    GEOCH
    1740.0
    [m]
    DC
    GEOCH
    1770.0
    [m]
    DC
    GEOCH
    1800.0
    [m]
    DC
    GEOCH
    1830.0
    [m]
    DC
    GEOCH
    1860.0
    [m]
    DC
    GEOCH
    1890.0
    [m]
    DC
    GEOCH
    1920.0
    [m]
    DC
    GEOCH
    1950.0
    [m]
    DC
    GEOCH
    1983.0
    [m]
    DC
    GEOCH
    2031.0
    [m]
    DC
    GEOCH
    2061.0
    [m]
    DC
    GEOCH
    2112.0
    [m]
    DC
    GEOCH
    2139.0
    [m]
    DC
    GEOCH
    2169.0
    [m]
    DC
    GEOCH
    2196.0
    [m]
    DC
    GEOCH
    2223.0
    [m]
    DC
    GEOCH
    2250.0
    [m]
    DC
    GEOCH
    2700.0
    [m]
    DC
    PETROSTR
    2706.0
    [m]
    DC
    PETROS
    2712.0
    [m]
    DC
    PETROS
    2715.0
    [m]
    DC
    PETROS
    2718.0
    [m]
    DC
    PETROS
    2721.0
    [m]
    DC
    PETROS
    2727.0
    [m]
    DC
    PETROS
    2730.0
    [m]
    DC
    PETROS
    2733.0
    [m]
    DC
    PETROS
    2736.0
    [m]
    DC
    PETROS
    2739.0
    [m]
    DC
    PETROS
    2742.0
    [m]
    DC
    PETROS
    2748.0
    [m]
    DC
    PETROS
    2751.0
    [m]
    DC
    PETROS
    2754.0
    [m]
    DC
    PETROS
    3224.0
    [m]
    SWC
    FUGRO
    3225.0
    [m]
    DC
    FUGRO
    3232.0
    [m]
    SWC
    FUGRO
    3246.0
    [m]
    DC
    FUGRO
    3255.0
    [m]
    DC
    FUGRO
    3258.0
    [m]
    DC
    FUGRO
    3261.0
    [m]
    DC
    FUGRO
    3270.0
    [m]
    SWC
    FUGRO
    3279.0
    [m]
    DC
    FUGRO
    3285.0
    [m]
    SWC
    FUGRO
    3296.7
    [m]
    C
    FUGRO
    3297.3
    [m]
    C
    FUGRO
    3303.7
    [m]
    C
    FUGRO
    3305.7
    [m]
    C
    FUGRO
    3313.0
    [m]
    SWC
    FUGRO
    3324.0
    [m]
    DC
    FUGRO
    3336.0
    [m]
    DC
    FUGRO
    3342.0
    [m]
    SWC
    FUGRO

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    TEST1
    2916.00
    2923.00
    23.12.1980 - 00:00
    YES
    DST
    TEST2C
    2870.00
    2874.00
    24.01.1981 - 01:00
    YES

  • Lithostratigraphy
    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    211
    770
    819
    894

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    30.60

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2916
    2923
    0.0
    2.0
    2870
    2874
    0.0
    3.0
    2832
    2837
    0.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    3.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    2.0
    3.0

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    260.0
    36
    261.0
    0.00
    LOT
    SURF.COND.
    20
    940.0
    26
    955.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    186
    1.05
    waterbased
    709
    1.10
    waterbased

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    3074.40
    [m ]
    3078.10
    [m ]
    3085.10
    [m ]
    3091.60
    [m ]
    3097.20
    [m ]