Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6608/2-1 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6608/2-1 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6608/2-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    RD1202-inline 1718 & crossline 5456
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    RWE Dea Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1453-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    143
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    06.06.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.10.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.10.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    26.10.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    303.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    5634.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    5600.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    18
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    202
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LYR FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    66° 58' 7.03'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    8° 23' 37.61'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7428201.21
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    473532.27
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7192
  • Wellbore history

    General
    Well 6608/2-1 S was drilled on the Sverdrup prospect on the northern part of the Utgard High in the Norwegian Sea The primary objective was to test the hydrocarbon potential in the Middle Jurassic Fangst Group with secondary targets in the Early Jurassic Båt Group and the Late Cretaceous Nise Formation sands in the Shetland Group.
    Operations and results
    Wildcat well 6608/2-1 S was spudded with the semi-submersible installation Transocean Winner on 6 June 2013. A 9 7/8" pilot hole was drilled to 783 m where shallow gas was encountered. Because of the shallow gas the 20" casing was set shallow, at 714 m. The tool string stuck at 5073 m while reaming into hole after bit trip at 5263 m. The string was cut, leaving 192.5 m BHA in hole. A technical sidetrack 6608/2-1 S T2 was initiated at 11:00 hrs on 13 September. The kick-off point was at 4686 m in 6608/2-1 S. The T2 track was drilled to final TD at 5634 m (5600 m TVD) m in the Early Cretaceous Lyr Formation. The well was drilled with seawater and hi-vis sweeps down to 720 m, with Glydril mud from 720 m to 2770 m, and with EMS-4600 oil based mud from 2770 m to 5263 m in the primary well bore. The sidetrack was drilled with EMS-4600 oil based mud from kick-off at 4686 m to 4885 m and with WARP mud from 4885 m to TD.
    There were a number of deviations from the proposed stratigraphy in this well. The Kai Formation was not present in the well. Instead, the Nordland Group consisted of a thicker than prognosed Naust Formation. The Early Cretaceous Cromer Knoll Group proved to be much thicker than prognosed. The Late Cretaceous Nise formation had no reservoir development within the wellbore while the Jurassic targets were absent/not reached. The well was dry with no shows.
    No conventional cores were cut and no fluid samples were taken in the well bores. The temperatures encountered were higher than prognosed. Measured temperature was 149 °C (12 degrees higher than prognosed) at 4406 m TVD and 200 °C at 5566 m TVD.
    The well was permanently abandoned on 26 October as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    730.00
    5262.00
  • Lithostratigraphy

    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    329
    329
    2528
    2528
    2638
    2638
    2730
    2740
    2740
    2758
    3247
    3762
    3762
    5334
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    LWD - GR RES ECD DI
    329
    2784
    LWD - GR RES ECD DI SON DEN NEU
    2784
    5634
    MSCT
    5150
    5600
    MSCT
    5320
    5375
    ONB12 GPIT PPC MSIP PPC EDTC LEH
    2600
    4509
    RT APS TLD HNGS GPIT EDTC LEHQT
    2580
    4509
    VSI4
    1148
    4500
    ZOQVSI GR
    3585
    5624
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    396.0
    36
    398.0
    0.00
    SURF.COND.
    20
    714.0
    26
    720.0
    0.00
    LINER
    16
    1799.0
    20
    1845.0
    0.00
    INTERM.
    13 3/8
    2773.0
    17 1/2
    2784.0
    0.00
    LINER
    11 3/4
    3026.0
    14
    3026.0
    0.00
    INTERM.
    9 5/8
    4487.0
    12 1/4
    4500.0
    0.00
    OPEN HOLE
    5634.0
    8 1/2
    5634.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    780
    1.26
    11.0
    Glydril
    1845
    1.24
    13.0
    Glydril WBM
    2530
    1.55
    22.0
    Glydril
    2773
    1.55
    22.0
    Glydril WBM
    2792
    1.62
    43.0
    EMS 4600 synthetic
    2998
    1.70
    39.0
    EMS 4600 synthetic
    3026
    1.72
    38.0
    EMS 4600 synthetic
    3039
    1.62
    24.0
    EMS 4600 synthetic
    4245
    1.76
    52.0
    WARP
    4500
    1.69
    39.0
    EMS 4600 synthetic
    4896
    1.82
    39.0
    WARP
    5634
    1.82
    42.0
    WARP