Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
31.10.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

35/11-16 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    35/11-16 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    35/11-16
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    (NH0711STT2).inline 2635 & crossline 1128
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1493-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    65
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.01.2014
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    18.03.2014
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    18.03.2016
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.03.2016
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    367.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3554.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3236.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    40.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    118
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SOGNEFJORD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 8' 14.37'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 30' 35.87'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6778351.42
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    527463.86
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7303
  • Wellbore history

    General
    Well 35/11-16 S was drilled to test the Juv prospect on the Lomre Terrace north of the Troll Field in the North Sea. The primary objective was to prove presence of hydrocarbons in the Sognefjord Formation in the Fram area.
    Operations and results
    Wildcat well 35/11-16 S was spudded with the semi-submersible installation Songa Trym on 10 January 2014. The well was drilled with an S-shaped well path due to simultaneous operations with production drilling in Fram area. The well was drilled down to 12 1/4" section TD at 3272 m in the Draupne Formation. Due rough weather, the hole was left open for 4 days and a wiper trip was performed. During the wiper trip, circulation was lost. The well was plugged back and a technical sidetrack was performed from 1180 m through 13 3/8" casing. The sidetrack reached final TD at 3554 m in the Late Jurassic Sognefjord Formation. The well was drilled with seawater and hi-vis sweeps down to 668 m, with KCl/polymer/GEM GP mud from 668 m to 1321 m, with XP-07 oil based mud from 1321 m to 3008 m, and with KCl/polymer/GEM GP mud from 3008 m to TD.
    The well penetrated about 9 m net of water-bearing Intra Draupne Formation sandstones with relatively good reservoir quality. Oil shows were described in the interval 3329 to 3340 m in these sandstones.
    One short core was cut in the technical sidetrack, from 3348.6 to 3353.8 m. All wire line logs are from the technical side track. No fluid sample was taken.
    The well was permanently abandoned on 18 March 2014 as a dry well with shows.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    680.00
    3272.60
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3348.6
    3351.9
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    3.3
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD-ARC VIS TELE
    443
    668
    MWD-PDX6 ARC9 TELE
    668
    1321
    MWD-TELE
    392
    443
    MWD-XCEED ARC8 TELE SADN8
    1321
    3272
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    439.8
    36
    443.0
    0.00
    SURF.COND.
    20
    661.5
    26
    668.0
    1.22
    FIT
    INTERM.
    13 3/8
    1314.3
    17 1/2
    1321.0
    1.50
    FIT
    LINER
    9 5/8
    3007.8
    12 1/4
    3008.0
    1.43
    FIT
    OPEN HOLE
    3554.0
    8 1/2
    3554.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    668
    1.14
    19.0
    KCl/Polymer/GEM
    1100
    1.33
    24.0
    XP-07 - Yellow
    1140
    1.39
    20.0
    XP-07 - Yellow
    1194
    1.14
    22.0
    KCl/Polymer/GEM
    1200
    1.33
    22.0
    XP-07 - Yellow
    1311
    1.14
    21.0
    KCl/Polymer/GEM
    1343
    1.33
    20.0
    XP-07 - Yellow
    1350
    1.37
    20.0
    XP-07 - Yellow
    1350
    1.24
    15.0
    KCl/Polymer/GEM
    1530
    1.37
    22.0
    XP-07 - Yellow
    1800
    1.33
    24.0
    XP-07 - Yellow
    1938
    1.37
    23.0
    XP-07 - Yellow
    2323
    1.33
    24.0
    XP-07 - Yellow
    2799
    1.39
    24.0
    XP-07 - Yellow
    2850
    1.37
    26.0
    XP-07 - Yellow
    3011
    1.14
    19.0
    KCl/Polymer/GEM
    3065
    1.37
    26.0
    XP-07 - Yellow
    3110
    1.14
    11.0
    KCl/Polymer/GEM
    3200
    1.24
    15.0
    KCl/Polymer/GEM
    3272
    1.39
    29.0
    XP-07 - Yellow
    3274
    1.39
    24.0
    XP-07 - Yellow
    3290
    1.21
    15.0
    KCl/Polymer/GEM
    3348
    1.21
    15.0
    KCl/Polymer/GEM
    3554
    1.25
    12.0
    KCl/Polymer/GEM