Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
25.11.2024 - 01:30
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7220/6-2 R

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7220/6-2 R
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7220/6-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN11M04 inline 7758 & crossline 3828
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1590-L2
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    31
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    23.10.2016
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.11.2016
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    22.11.2016
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.11.2018
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    22.11.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    YES
    Reentry activity
    Reason for reentry of the wellbore. Only relevant for exploration wellbores. Example of legal values: DRILLING, DRILLING/PLUGGING, LOGGING, PLUGGING, TESTING, TESTING/PLUGGING.
    DRILLING/TESTING/PLUGGING
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    PERMIAN
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    ØRN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    387.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1318.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1318.0
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    72° 34' 13.1'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    20° 58' 19.66'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    8062692.32
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    699378.62
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    33
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8026
  • Wellbore history

    Wellbore history
    General
    Well 7220/6-2 and its re-entry 7220/6-2 R were drilled to test the Neiden prospect on the western side of the Loppa High in the Barents Sea. The well location is ca 4 km north-northwest of the Obelix well 7220/6-1, which had shows and traces of live oil in the Permian Ørn Formation. The primary objectives were to test the reservoir properties and hydrocarbon potential in sandstones within the Triassic Snadd Formation and in the carbonates of the Ørn Formation. Wellbore 7220/6-2 was drilled with Island Innovator and was suspended in the Triassic Snadd Formation on 4 November 2015 due to rig classification in the Barents Sea for the prevailing winter. The re-entry 7220/6-2 R was drilled to test the Permian target not reached by 7220/6-2.
    Operations and results
    Well 7220/6-2 was re-entered on 23 October 2016. Well 7220/6-2 R was drilled with the semi-submersible installation Leiv Eiriksson to TD at 1318 m, 99 m into metamorphic basement rock. Operations proceeded without significant problems. The well was drilled with KCl/Polymer/GEM water based mud all through.
    Snadd claystones were found to rest directly upon carbonates of the Permian Ørn Formation. The Ørn Formation was encountered in the 7220/6-2 R at 1059.5 m. The formation had a gross thickness of 168.9 m of carbonates, and was mainly composed of dolomites, dolomitic limestones, dolomitic conglomerates and cherts. The Ørn Formation yielded both gas and oil and contained a gross 31 m hydrocarbon column. The Gas-Oil contact is indicated to be in the interval 1067 to 1077 m. An Oil-Water contact was identified at 1091 m. Oil shows (spotty direct and cut fluorescence, but no odour) continued below the OWC and down to top basement at 1270 m
    A total of 43.8 m core was cut in seven cores in the intervals 1050 to 1053.3 m and 1062 to 1102.5. Total recovery for all seven cores was 96.9%. MDT fluid samples were taken at 1066 m (gas), 1074.4 m (oil), 1078.7 m (oil), 1091 m (oil), 1096 m (water) and 1119.5 m (water).
    The well was permanently abandoned on 22 November 2016 as an oil and gas discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    983.00
    1317.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1050.0
    1052.8
    [m ]
    2
    1062.0
    1070.3
    [m ]
    3
    1070.7
    1073.4
    [m ]
    4
    1073.4
    1085.5
    [m ]
    5
    1085.6
    1097.4
    [m ]
    6
    1097.4
    1099.8
    [m ]
    7
    1099.9
    1102.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    42.7
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    412
    412
    481
    481
    510
    510
    1060
    1060
    1229
    1270
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR NEXT UBI XPT
    931
    1315
    FMI MSIP
    931
    1316
    MDT
    1066
    1119
    MSCT
    1044
    1300
    MWD - GR PWD RES ST DEN CAL NEU
    979
    1317
    PEX HRLA ADT
    830
    1319
    VSP
    335
    1310
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    478.0
    36
    478.0
    0.00
    SURF.COND.
    13 3/8
    494.8
    20
    497.0
    1.26
    FIT
    PILOT HOLE
    497.0
    9 7/8
    497.0
    0.00
    LINER
    9 5/8
    605.2
    12 1/4
    606.0
    1.44
    FIT
    LINER
    7
    978.0
    8 1/2
    979.0
    1.40
    FIT
    OPEN HOLE
    1317.8
    6
    1317.8
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    430
    1.15
    16.0
    KCL/Gem
    498
    1.14
    16.0
    KCL/Gem
    734
    1.14
    13.0
    KCL/Gem
    1055
    1.15
    19.0
    KCL/Gem
    1105
    1.14
    16.0
    KCL/Gem
    1105
    1.16
    14.0
    KCL/Gem
    1207
    1.14
    17.0
    KCL/Gem
    1323
    1.14
    22.0
    KCL/Gem