Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
01.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-30 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-30 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-30
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN12M02R16 Inline: 4701 Xline: 4139
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Equinor Energy AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1764-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    36
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    27.05.2019
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    01.07.2019
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    01.07.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.07.2021
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.11.2021
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    GRID FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    DRAUPNE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    38.6
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    113.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2140.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2057.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    28.9
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    88
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 58' 50.71'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 16' 50.88'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6538281.90
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    458655.69
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8748

  • Wellbore history
    Well 16/1-30 S Lille Prinsen Outer Wedge was drilled to appraise the 16/1-29 Lille Prinsen Discovery o n the north-western part of the Utsira High in the North Sea. The structure was first tested by wells 16/1-6S and 16/1-6 A, which made the Verdandi Discovery in the Eocene Grid and Paleocene Heimdal formations. The Lille Prinsen prospect is mapped in several geographically separate segments at Basement to Base Cretaceous level. These segments are: The Permian Main Carbonate Discovery penetrated by 16/1-29 S, the western Outer Wedge segment, and segments 2,3 and 5 (Carbonate upsides). The primary objective of 16/1-30 S was to appraise the Outer Wedge segment believed to consist of Permian carbonates in  the 16/1-29 S with an overlying package of Triassic to Early Cretaceous siliciclastics. The secondary objective in 16/1-30 S was to appraise the oil and gas in the Grid and Heimdal formations found in the 16/1-6 S Verdandi discovery.
    Operations and results
    Appraisal well 16/1-30 S was spudded with the semi-submersible installation West Phoenix on 27 May 2019 and drilled to TD at 2140 m (1990 m TVD) m in basement rock. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 572 m, with Glydril mud from 572 to 1361 m, and with Versatec oil-based mud from 1361 m to TD.
    Well 16/1-30 S encountered poor quality oil-filled sandstone in the Grid Formation. Shows were observed on core and cuttings in the interval 1499 to 1421 m, including fluorescence and oil stain, and the log responses indicated the sandstone being oil filled. MDT pressure points was not conclusive due to poor reservoir quality, but oil was sampled at 1507.1 m and water at 1548 m.
    The Heimdal Formation was not present.
    Good quality Viking Group sandstone and Basement Group granite reservoirs were encountered in the primary target. Shows were observed on core chips and sidewall cores in the interval 2016 to 2047 m, including odour, oil stains, fluorescence, and oil seeping from SWC’s. MDT pressure points confirmed an oil and a water gradient in the Viking Group. Oil was sampled at 2023.8 m and water at 2042.7 m, and the oil and water gradients intersect at ca 2029 m.
    Four cores were cut. Core 1 was cut in the Grid Formation from 1510.9 to 1537.9 m. Cores 2 to 4 were cut in the interval 2023.2 to 2104.3 m in Intra-Draupne and Intra-Heather sandstones and upper part of Basement. The core-log depth shifts are 0.9 m, 6.2 m, 0.6 m, and 2.05 m respectively for core 1, 2, 3, and 4. MDT fluid samples were taken at 1507.1 m (oil with 8 to 14% OBM contamination) and 1548 m (water) in the Grid Formation, and at 2023.76 m (oil with 8 to 15% OBM contamination) and 2042.7 m (water) in the Viking Group.
    The well was permanently abandoned on 1 July 2019 as an oil appraisal well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    580.00
    2140.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1510.0
    1536.0
    [m ]
    2
    2017.0
    2035.1
    [m ]
    3
    2044.0
    2074.6
    [m ]
    4
    2075.5
    2102.4
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    101.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2078.0
    [m]
    C
    CGG
    2083.0
    [m]
    C
    CGG
    2087.0
    [m]
    C
    CGG

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT PEX HNGS CMR
    2008
    2125
    AIT PEX HNGS MSIP QGEO
    200
    1355
    IBC HD CBL
    700
    1350
    MDT
    1997
    2141
    MDT CMR
    1380
    1999
    MSIP NGI NEXT
    1997
    2141
    MWD - ARC TELE
    203
    572
    MWD - ARC TELE
    1999
    2140
    MWD - PD ARC TELE
    572
    1999
    MWD - TELE
    152
    203
    XLR
    2002
    2128
    ZO VSP
    139
    2136

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    202.0
    42
    203.0
    0.00
    SURF.COND.
    20
    567.0
    36
    567.0
    1.56
    FIT
    INTERM.
    13 3/8
    1355.0
    16
    1355.0
    1.67
    FIT
    INTERM.
    9 5/8
    1999.0
    12 1/4
    1998.0
    1.84
    LOT
    OPEN HOLE
    2140.0
    8 1/2
    2140.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    561
    1.20
    13.0
    Glydril
    1056
    1.20
    14.0
    Glydril
    1355
    1.30
    27.0
    Versatec
    1361
    1.20
    14.0
    Glydril
    1536
    1.30
    31.0
    Versatec
    1950
    1.35
    34.0
    Versatec
    1999
    1.30
    34.0
    Versatec
    2002
    1.05
    12.0
    Versatec
    2017
    1.08
    13.0
    Versatec
    2076
    1.09
    13.0
    Versatec
    2140
    1.09
    4.0
    Versatec