Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

2/1-12

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/1-12
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    2/1-12
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    BP Norway Limited U.A.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    946-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    34
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    08.01.1999
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    10.02.1999
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.02.2001
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    10.02.1999
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.12.2002
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    68.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3550.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3550.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    125
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BRYNE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 52' 13.28'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    3° 18' 46.44'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6303139.22
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    519074.96
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3648

  • Wellbore history
    General
    In September of 1998 BP Norge became operator of the PL 019C licence. The 2/1-12 well was the first well in the licence. The main prospect was the Upper Jurassic Ula Formation. The prospect was prognosed as a four-way dip closure, sealed by Upper Jurassic mudstones. Secondary targets were provided by the Vale Formation sandstones (Tertiary) and by limestones of the Tor Formation (Cretaceous). Well control was provided by the Saga operated wells 2/2-2 (1982) and 2/2-5 (1992) and by the BP well 2/1-5 (1982).
    Operations and results
    Wildcat well 2/1-12 was spudded with the semi-submersible installation "Maersk Jutlander" on 8 January 1999 and reached a Total Depth of 3550.0 m on the 31st January 1999 in sediments of the Middle Jurassic Bryne Formation. A 12 1/4" pilot hole was drilled to 950 m and logged with the CDR tool and was then opened to 17 1/2". No indications of shallow gas were observed on logs.
    At 2808 m, the well was shut in due to a 300 bbl water influx. Shut-in drill pipe pressure was 225 psi and Shut-in casing pressure 345psi. The influx was circulated out with 1.60 sg mud. Analysis of the DxC Exponent and sonic logs shows that the pore pressure was risen to 1.53 sg in the mudstone sequence overlying the Lista Formation at 2704 m. Drilling continued until a flow check was performed at a negative drill break and the well was found to be flowing.
    At 3133 m a crack was noticed in the shaft of the top drive. The bit was pulled into the 9 5/8" casing and repairs were undertaken. These repairs required the well to be static for 42 hrs. After the repairs were completed, circulation was established and after 30 minutes of circulation gas increased to 41.2% and dark brown oil was observed over the shakers and in the header box. No shows were seen in the cuttings or in the electrical logs. Geochemical analysis of a sample of the oil showed it to be similar to the Gyda oil. The well was drilled entirely water based with sea water and bentonite hi-vis pills through 36" and 17 1/2" sections down to 950 m, sodium silicate (Barasilc) mud from 950 m to 2930 m, and with KCl polymer mud from 2930 m to TD.
    The Ula Formation was encountered at 3250.7 m, 16.5 m higher than prognosed. The sand was of good quality, but no hydrocarbon shows were observed and LWD resistivity logs indicated the reservoir was water-wet.
    MDT pressure measurements and sidewall cores were obtained in 8" hole. A detailed pressure survey of the Ula Formation was carried out using the MDT tool and showed the reservoir pressure lay on a water gradient. No conventional cores were taken. No fluid samples were collected. The well was plugged and abandoned as a dry hole on 11 February 1999.
    Testing
    No drill stem test was performed

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    SURF.COND.
    30
    164.0
    36
    165.0
    0.00
    LOT
    INTERM.
    13 3/8
    937.0
    17 1/2
    950.0
    1.80
    LOT
    INTERM.
    9 5/8
    2922.0
    12 1/4
    2922.0
    1.77
    LOT
    OPEN HOLE
    3550.0
    8 1/2
    3550.0
    0.00
    LOT

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AMS MDT GR
    3526
    3553
    CST GR
    3222
    3545
    LWD - CDR
    163
    944
    LWD - CDR ADN GST ISONIC
    2911
    3535
    LWD - CDR ISONIC
    944
    2911

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.34

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.01

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    2.85
    .pdf
    24.89

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    130
    0.00
    DUMMY
    140
    1.03
    WATER BASED MUD
    340
    1.54
    30.0
    WATER BASED MUD
    829
    1.03
    SEAWATER
    950
    1.03
    SEAWATER
    953
    1.30
    17.0
    WATER BASED MUD
    1600
    1.39
    29.0
    WATER BASED MUD
    2200
    1.50
    35.0
    WATER BASED MUD
    2801
    1.50
    28.0
    WATER BASED MUD
    2808
    1.60
    27.0
    WATER BASED MUD
    2866
    1.60
    28.0
    WATER BASED MUD
    2903
    1.60
    26.0
    WATER BASED MUD
    2925
    1.60
    25.0
    WATER BASED MUD
    2925
    1.62
    27.0
    WATER BASED MUD
    2930
    1.55
    26.0
    WATER BASED MUD
    2944
    1.54
    30.0
    WATER BASED MUD
    3133
    1.53
    28.0
    WATER BASED MUD
    3154
    1.54
    25.0
    WATER BASED MUD
    3200
    1.54
    30.0
    WATER BASED MUD
    3321
    1.54
    36.0
    WATER BASED MUD
    3542
    1.54
    30.0
    WATER BASED MUD
    3550
    1.54
    30.0
    WATER BASED MUD