Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

1/3-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/3-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/3-1
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    A/S Norske Shell
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    15-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    129
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    06.07.1968
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    11.11.1968
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    11.11.1970
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    30.04.2010
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    TOR FM
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY CRETACEOUS
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    CROMER KNOLL GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    71.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4877.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    18
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    182
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ZECHSTEIN GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 51' 21'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 51' 5'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6301488.86
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    490936.87
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    154

  • Wellbore history
    General
    Well 1/3-1 was drilled on the crest of a salt-induced anticline on the Hidra High in the North Sea. The purpose of the well was to investigate Tertiary and Mesozoic sequences down to top salt.
    The well is Type Well for the Våle, Hidra, Hod, and Tor Formations, and Reference Well for the Vidar, Ekofisk and Blodøks Formations.
    Operations and results
    Well 1/3-1 was spudded with the four leg jack-up installation Orion on 6 July 1968 and drilled to TD at 4877 m in the Permian Zechstein Group. From the deviation survey it is seen that the well starts to deviate significantly at 4037 m (8 deg deviation), and at TD the deviation is 18 deg. This will correspond to a TVD RKB that is ca 25 m less than MD RKB. Several drilling problems occurred during the drilling operations of well 1/3-1. While drilling the 17 1/2" hole for the 20" casing, circulation losses started at 220 m (720') and became total at 238 m (781'). While drilling on with sea water, without returns, the pipe stuck. The lost circulation zone eventually had to be sealed off with a cement plug. In the Tertiary plastic clays the problems included tight hole conditions, bit balling, and difficulties in lowering the logging tools. The mud weight had to be raised from 10.8 ppg to 13.6 ppg to stabilize the hole. At 4131 m (13554') the bit twisted off, but was retrieved on the second fishing run. A hydrocarbon bearing zone was encountered at 4567 m (14984'). The mud became gas cut. At 4592 m (15064') the degasser was overloaded and the circulation lost, probably higher in the hole. A cement plug was needed to combat the lost circulation problems. It was then decided to set a 7" casing. Circulation was lost while running the casing, which had to be cemented in two stages. Drilling continued with a 5 7/8" bit. Around 4677 m (15346'), when drilling into salt, the penetration rate increased from 10 to 50 ft/hr. Further deepening to TD went without problems. The well was drilled water based.
    Well 1/3-1 found no sand of any significance in the Tertiary section. An unexpectedly thick Danian/Late Cretaceous chalk section (Shetland Group) was penetrated from 3258 m to 4441 m. The underlying Cromer Knoll Group was found resting directly on Permian salt at 4671 m. Minor gas was confirmed by testing in the Tor Formation. No source rock section was identified in the well. Shows were reported in the interval from 2999 m to 3423 m as follows: direct and cut "faint" fluorescence were reported on sidewall cores from the interval 2999 to 3002 m; weak cut fluorescence was recorded on cuttings from 3039 m; strong cuttings fluorescence and moderate cut was recorded at 3357 m; "fair" - "soaked w/oil, giving yellowish-grn flu, but no cut" on the conventional core at 3405 to 3423 m
    One core was cut from 11165 to 11232 ft (3403.1 to 3423.5 m). No wire line fluid samples were taken. A sea bed core (0 - 46 m from seabed) was taken for geotechnical purposes at the 1/3-1 location. Samples from this core are available at the NPD.
    The well was permanently abandoned on 11 November 1968 as a minor gas discovery.
    Testing
    Three Drill Stem Tests were conducted. They produced some fluids at very low rates:
    DST 1 tested the interval 4583.6 - 4601.0 m in the Cromer Knoll Group and recovered a total of 0.74 bbl gas cut mud in 45 minutes, corresponding to a standard rate of 40 bbl (1133 Sm3) gas/day.
    DST 2 tested the interval 4563.5 - 4581.8 m in the Cromer knoll Group and recovered a total of 18 bbl of gas cut mud with traces of condensate and slugs of gas in 140 minutes. This corresponds to a standard rate of 234 bbl (6626 Sm3) gas/day.
    DST 3 tested the interval 3355.2 - 3359.8 m in the Tor Formation and recovered a total of 30 bbl of gas cut mud and slugs of gas in 45 minutes. This corresponds to a standard rate of 1000 bbl (28317 Sm3) gas/day.

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3403.4
    3422.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    19.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    140.0
    36
    137.0
    0.00
    LOT
    SURF.COND.
    20
    408.0
    26
    415.0
    0.00
    LOT
    INTERM.
    13 3/8
    1529.0
    17 1/2
    1535.0
    0.00
    LOT
    INTERM.
    9 5/8
    3118.0
    12 1/4
    3128.0
    0.00
    LOT
    LINER
    7
    4585.0
    8 1/2
    4593.0
    0.00
    LOT

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    4585
    4602
    12.5
    2.0
    4565
    4602
    12.5
    3.0
    3356
    3361
    12.5
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    80.000
    61.000
    2.0
    52.000
    40.000
    3.0
    70.000
    50.000
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    1132
    2.0
    6626
    3.0
    28317

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BRIDGEPLUG-1
    3480
    3480
    BRIDGEPLUG-2
    3337
    3337
    BS GRC
    137
    4745
    CALI
    365
    1435
    CBL
    71
    1310
    CBL
    2895
    4583
    CDM
    1529
    4757
    FDC
    405
    4645
    IE.7
    1530
    4758
    IES
    408
    3736
    MLLC
    1529
    4867
    PERF
    3355
    3359
    PERF
    4563
    4565
    PERF
    4573
    4578
    PERF
    4580
    4581
    SNP
    2819
    4767
    SWS
    1533
    3116
    SWS
    4588
    4733
    TS
    30
    3313
    VELOCITY
    609
    4458

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.88
    pdf
    1.24

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    3.01
    pdf
    4.16
    pdf
    24.93
    pdf
    2.31
    pdf
    23.69

  • Documents – Norwegian Offshore Directorate papers
    Documents – Norwegian Offshore Directorate papers
    Document name
    Document format
    Document size [MB]
    pdf
    14.98
    pdf
    78.91

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    415
    1.07
    42.0
    waterbased
    861
    1.12
    48.0
    waterbased
    1218
    1.13
    43.0
    waterbased
    1534
    1.18
    45.0
    waterbased
    2034
    1.31
    49.0
    waterbased
    2455
    1.34
    46.0
    waterbased
    3127
    1.53
    48.0
    waterbased
    3409
    1.56
    47.0
    waterbased
    4220
    1.60
    48.0
    waterbased

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    4510.0
    [ft]
    DC
    4780.0
    [ft]
    DC
    5170.0
    [ft]
    DC
    5440.0
    [ft]
    DC
    5740.0
    [ft]
    DC
    6070.0
    [ft]
    DC
    6280.0
    [ft]
    DC
    6600.0
    [ft]
    DC
    6860.0
    [ft]
    DC
    7140.0
    [ft]
    DC
    7400.0
    [ft]
    DC
    7690.0
    [ft]
    DC
    7960.0
    [ft]
    DC
    8240.0
    [ft]
    DC
    8550.0
    [ft]
    DC
    8800.0
    [ft]
    DC
    9060.0
    [ft]
    DC
    9350.0
    [ft]
    DC
    9570.0
    [ft]
    DC
    9780.0
    [ft]
    DC
    10080.0
    [ft]
    DC
    UNIVSHEF
    10140.0
    [ft]
    DC
    UNIVSH
    10270.0
    [ft]
    DC
    UNIVSH
    10330.0
    [ft]
    DC
    UNIVSH
    10390.0
    [ft]
    DC
    UNIVSH
    10600.0
    [ft]
    DC
    10810.0
    [ft]
    DC
    11370.0
    [ft]
    DC
    11680.0
    [ft]
    DC
    11980.0
    [ft]
    DC
    12210.0
    [ft]
    DC
    12490.0
    [ft]
    DC
    12780.0
    [ft]
    DC
    13060.0
    [ft]
    DC
    13350.0
    [ft]
    DC
    13560.0
    [ft]
    DC
    13840.0
    [ft]
    DC
    14050.0
    [ft]
    DC
    14310.0
    [ft]
    DC
    14590.0
    [ft]
    DC
    14850.0
    [ft]
    DC
    15100.0
    [ft]
    DC
    15310.0
    [ft]
    DC
    15560.0
    [ft]
    DC

  • Thin sections at the Norwegian Offshore Directorate
    Thin sections at the Norwegian Offshore Directorate
    Depth
    Unit
    11221.00
    [ft ]
    11221.00
    [ft ]