6403/6-1

hide details Export:  PDF

• General information

  General information

  Attribute	Value
  Wellbore name Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.	6403/6-1
  Type Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)	EXPLORATION
  Purpose Final classification of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS. Legal values for other wellbores: SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities), SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location), PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore), SCIENTIFIC (drilling according to Law of Scientific research and exploration), STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).	WILDCAT
  Status Status for the wellbore. Legal values are: BLOWOUT: A blowout has occurred in the well. CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported. DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging, JUNKED: The drilling operation has been terminated due to technical problems. P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations. PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage. PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate. INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate. PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores. RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore. RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production. SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.	P&A
  Press release	link
  Multilateral Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.	NO
  Factmaps in new window	link
  Main area Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.	NORWEGIAN SEA
  Well name Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.	6403/6-1
  Production licence Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).	322
  Drilling operator Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.	Statoil ASA (old)
  Drill permit The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.	1111-L
  Drilling facility Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.	EIRIK RAUDE
  Drilling days Number of days from wellbore entry to wellbore completion.	105
  Entered date The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,	10.04.2006
  Completed date Exploration wellbores from moveable facilities: For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores: Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore. Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.	23.07.2006
  Release date Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.	23.07.2008
  Publication date Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.	20.08.2008
  Purpose - planned Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.	WILDCAT
  Content For exploration wellbores, status of discovery. Legal values: DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS. SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment. Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER For development wellbores, type of produced/injected fluid. Legal values: WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.	DRY
  Discovery wellbore Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.	NO
  Kelly bushing elevation [m] Elevation of the rotary kelly bushing (RKB) above mean sea level.	25.0
  Water depth [m] Depth in metres betweem mean sea level and sea floor.	1721.0
  Total depth (MD) [m RKB] Total measured length of wellbore from kelly bushing to total depth (driller's depth).	4120.0
  Final vertical depth (TVD) [m RKB] Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).	4120.0
  Maximum inclination [°] Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.	2.7
  Bottom hole temperature [°C] Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.	118
  Oldest penetrated age Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.	LATE CRETACEOUS
  Oldest penetrated formation Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.	LYSING FM
  Geodetic datum Reference system for coordinates. Example of legal values: ED50.	ED50
  NS degrees Geographic coordinate of the wellhead, north-south degrees.	64° 36' 30.46'' N
  EW degrees Geographic coordinate of the wellhead, east-west degrees.	3° 43' 9.58'' E
  NS UTM [m] Universal Transverse Mercator coordinate of the wellhead, north-south.	7165192.95
  EW UTM [m] Universal Transverse Mercator coordinate of the wellhead, east-west.	534417.98
  UTM zone Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.	31
  NPDID wellbore Norwegian Offshore Directorate's unique id for the wellbore.	5296

• Wellbore history

  General

  Wildcat well 6403/6-1 is located ca 80 km west-northwest of the 6405/7-1 Ellida oil discovery. It was drilled on the Edvarda structure, located along the Jan-Mayen Lineament in the transition zone between the Møre Basin in the south and the Vøring Basin in the north. The objective of the well was to verify the presence of hydrocarbons in reservoir formations of Campanian age in the Nise Formation and the Lysing member of the Kvitnos Formation. An additional objective was to test for the presence of reservoirs in Paleocene and Maastrichtian deposits.

  Operations and results

  Well 6406/3-1 was spudded on 10 April 2006 with the semi-submersible installation Eirik Raude and drilled to TD at 4120 m in the Late Cretaceous Kvitnos Formation. An 8 1/2" pilot hole, designated 6403/6-U-1, was spudded on 6 April 2006 and drilled to a total depth of 2400 m prior to drilling the main hole. The objective of the pilot hole was to detect for possibly overpressured sands in the shallow formations whilst secondarily, to get good logging data of the upper section. Both the pilot and the main holes were drilled without significant technical problems and within time budget.

  The pilot 6403/6-U-1was drilled with Seawater/Bentonite all through. The main hole was drilled with Seawater/CMC down to 2394 m, with the Ultradrill mud system from 2394 m to 2748 m, with Ultradrill DeepWater mud system (with hydrate inhibition) from 2748 m to 3177 m, and with Ultradrill mud from 3177 m to TD. The Ultradrill mud contains the "Ultrafree NS" agent, a Linear Alfa Olefin (LAO) component. Gas chromatographic analyses showed that it contained two (not one) major olefins in addition to many more organic compounds.

  Well 6403/6-1 was spudded 44 m from the pilot hole location in 1721 m of water depth. The well was drilled vertically through Quaternary, Tertiary and Late Cretaceous formations to a total depth of 4120 m, in the Lysing member. The primary Nise Formation target was penetrated at 3047.5 m and consisted of interbedded sandstones, siltstones and shales. One core was cut from 3058 m to 3084.5 m. Extensive wire line data acquisition was performed, including MDT pressure testing and sidewall cores. No fluid samples were acquired due to the very tight nature of the sands. No shows were recorded while drilling, but traces of migrated hydrocarbons were interpreted from post-well organic geochemical analyses in an SWC at 3056.5 m in the uppermost Nise Formation. The secondary target, the Lysing member, was encountered at 4018 m, the base not being penetrated. This formation consisted of interbedded shales and sands with very poor reservoir properties. The coring criteria were not met, but an extensive wire line data acquisition program was performed. The reservoir quality was such that neither pre-tests nor fluid samples could be acquired. No shows were recorded.

  The well was permanently abandoned on 23 July 2006 as a dry well.

  Testing

  No drill stem test was performed.

• Cuttings at the Norwegian Offshore Directorate

  Cuttings at the Norwegian Offshore Directorate

  Cuttings available for sampling?	YES

  Cuttings at the Norwegian Offshore Directorate

  Cutting sample, top depth [m]	Cutting samples, bottom depth [m]
  2405.00	4119.00

• Cores at the Norwegian Offshore Directorate

  Cores at the Norwegian Offshore Directorate

  Core sample number	Core sample - top depth	Core sample - bottom depth	Core sample depth - uom
  1	3058.1	3084.4	[m ]

  Cores at the Norwegian Offshore Directorate

  Total core sample length [m]	26.2

  Cores at the Norwegian Offshore Directorate

  Cores available for sampling?	YES

• Casing and leak–off tests

  Casing and leak–off tests

  Casing type	Casing diam. [inch]	Casing depth [m]	Hole diam. [inch]	Hole depth [m]	LOT/FIT mud eqv. [g/cm3]	Formation test type
  CONDUCTOR	30	1843.0	36	1845.0	0.00	LOT
  SURF.COND.	20	2394.0	26	2394.0	1.19	LOT
  INTERM.	16	2548.0	17 1/2	2560.0	1.29	LOT
  INTERM.	13 3/8	2741.0	14 3/4	2748.0	1.34	LOT
  INTERM.	9 5/8	2983.0	12 1/4	2983.0	1.46	LOT
  INTERM.	7	3768.0	8 1/2	3775.0	1.50	LOT
  OPEN HOLE		4120.0	6	4120.0	0.00	LOT

• Logs

  Logs

  Log type	Log top depth [m]	Log bottom depth [m]
  DSI HRLA PEX HNGS	1883	2560
  DSI HRLA PEX HNGS	2464	2750
  DSI PEX HRLA HNGS	2740	2976
  FMI MSIP	3768	4120
  MDT	2983	3050
  MDT	2983	3066
  MDT-DP GR	3053	3235
  MSCT GR	2405	2545
  MSCT GR	2762	2993
  MSCT GR	3784	4112
  MSIP FMI HNGS	2983	3773
  MWD - ONTRACK	1843	2400
  MWD - ONTRACK ECD GR APX DIR	2749	2983
  MWD - ONTRACK ECD GR RES DIR	2395	2749
  MWD - ONTRACK ECD GR RES DIR	2983	4120
  MWD - ONTRACK ORD CCN APX	1746	1758
  MWD - ONTRACK ORD CCN APX	2122	2122
  PEX HRLA ECS	2983	3772
  PEX HRLA HNGS	2347	4110
  PEX HRLA HNGS	3768	4120
  VSI GR	1758	2348
  VSI GR	2150	2740
  VSI GR	2654	3029

• Lithostratigraphy

  Lithostratigraphy

  Top depth [mMD RKB]	Lithostrat. unit
  1746	NORDLAND GP
  1746	NAUST FM
  1786	KAI FM
  1906	HORDALAND GP
  1906	BRYGGE FM
  2140	ROGALAND GP
  2140	TARE FM
  2256	TANG FM
  2439	SHETLAND GP
  2439	SPRINGAR FM
  3048	NISE FM
  3475	KVITNOS FM
  4018	CROMER KNOLL GP
  4018	LYSING FM

• Composite logs

  Composite logs

  Document name	Document format	Document size [MB]
  5296_6403_6_1	pdf	0.52

• Geochemical information

  Geochemical information

  Document name	Document format	Document size [MB]
  5296_01_6403_6_1_gch_transfer _1	txt	0.00
  5296_02_6403_6_1_gch_results _1	txt	0.22
  5296_1	pdf	0.28
  5296_2	pdf	1.79

• Drilling mud

  Drilling mud

  Depth MD [m]	Mud weight [g/cm3]	Visc. [mPa.s]	Yield point [Pa]	Mud type	Date measured
  2400	1.08	30.0		ULTRADRILL
  2560	1.12	16.0		ULTRADRILL
  2608	1.14			ULTRADRILL
  2675	1.18	17.0		ULTRADRILL
  2850	1.22	16.0		ULTRADRILL
  2983	1.23	15.0		ULTRADRILL
  3000	1.25	15.0		ULTRADRILL
  3027	1.23	18.0		ULTRADRILL
  3138	1.23	17.0		ULTRADRILL
  3579	1.18	15.0		ULTRADRILL
  3768	1.29	20.0		ULTRADRILL
  3775	1.18	16.0		ULTRADRILL
  3782	1.21	15.0		ULTRADRILL
  4120	1.29	20.0		ULTRADRILL

• Palynological slides at the Norwegian Offshore Directorate

  Palynological slides at the Norwegian Offshore Directorate

  Sample depth	Depth unit	Sample type	Laboratory
  1773.0	[m]	ROV	PETROSTR
  1802.0	[m]	ROV	PETROS
  1831.0	[m]	ROV	PETROS
  1861.0	[m]	ROV	PETROS
  1946.0	[m]	ROV	PETROS
  1977.0	[m]	ROV	PETROS
  2035.0	[m]	ROV	PETROS
  2092.0	[m]	ROV	PETROS
  2151.0	[m]	ROV	PETROS
  2180.0	[m]	ROV	PETROS
  2235.0	[m]	ROV	PETROS
  2259.0	[m]	ROV	PETROS
  2286.0	[m]	ROV	PETROS
  2312.0	[m]	ROV	PETROS
  2370.0	[m]	ROV	PETROS
  2400.0	[m]	ROV	PETROS
  2410.0	[m]	DC	PETROS
  2420.0	[m]	DC	PETROS
  2430.0	[m]	DC	PETROS
  2440.0	[m]	DC	PETROS
  2450.0	[m]	DC	PETROS
  2460.0	[m]	DC	PETROS
  2470.0	[m]	DC	PETROS
  2480.0	[m]	DC	PETROS
  2490.0	[m]	DC	PETROS
  2500.0	[m]	DC	PETROS
  2510.0	[m]	DC	PETROS
  2520.0	[m]	DC	PETROS
  2530.0	[m]	DC	PETROS
  2540.0	[m]	DC	PETROS
  2550.0	[m]	DC	PETROS
  2560.0	[m]	DC	PETROS
  2570.0	[m]	DC	PETROS
  2580.0	[m]	DC	PETROS
  2590.0	[m]	DC	PETROS
  2600.0	[m]	DC	PETROS
  2610.0	[m]	DC	PETROS
  2620.0	[m]	DC	PETROS
  2630.0	[m]	DC	PETROS
  2640.0	[m]	DC	PETROS
  2650.0	[m]	DC	PETROS
  2670.0	[m]	DC	PETROS
  2690.0	[m]	DC	PETROS
  2700.0	[m]	DC	PETROS
  2710.0	[m]	DC	PETROS
  2720.0	[m]	DC	PETROS
  2730.0	[m]	DC	PETROS
  2740.0	[m]	DC	PETROS
  2748.0	[m]	DC	PETROS
  2760.0	[m]	DC	PETROS
  2770.0	[m]	DC	PETROS
  2780.0	[m]	DC	PETROS
  2790.0	[m]	DC	PETROS
  2800.0	[m]	DC	PETROS
  2810.0	[m]	DC	PETROS
  2820.0	[m]	DC	PETROS
  2830.0	[m]	DC	PETROS
  2840.0	[m]	DC	PETROS
  2850.0	[m]	DC	PETROS
  2860.0	[m]	DC	PETROS
  2870.0	[m]	DC	PETROS
  2880.0	[m]	DC	PETROS
  2890.0	[m]	DC	PETROS
  2900.0	[m]	DC	PETROS
  2910.0	[m]	DC	PETROS
  2920.0	[m]	DC	PETROS
  2930.0	[m]	DC	PETROS
  2940.0	[m]	DC	PETROS
  2950.0	[m]	DC	PETROS
  2960.0	[m]	DC	PETROS
  2970.0	[m]	DC	PETROS
  2990.0	[m]	DC	PETROS
  3000.0	[m]	DC	PETROS
  3010.0	[m]	DC	PETROS
  3020.0	[m]	DC	PETROS
  3030.0	[m]	DC	PETROS
  3039.0	[m]	DC	PETROS
  3048.0	[m]	DC	PETROS
  3054.0	[m]	DC	PETROS
  3060.0	[m]	DC	PETROS
  3087.0	[m]	DC	PETROS
  3093.0	[m]	DC	PETROS
  3099.0	[m]	DC	PETROS
  3105.0	[m]	DC	PETROS
  3111.0	[m]	DC	PETROS
  3117.0	[m]	DC	PETROS
  3123.0	[m]	DC	PETROS
  3129.0	[m]	DC	PETROS
  3135.0	[m]	DC	PETROS
  3141.0	[m]	DC	PETROS
  3147.0	[m]	DC	PETROS
  3153.0	[m]	DC	PETROS
  3159.0	[m]	DC	PETROS
  3165.0	[m]	DC	PETROS
  3171.0	[m]	DC	PETROS
  3177.0	[m]	DC	PETROS
  3183.0	[m]	DC	PETROS
  3195.0	[m]	DC	PETROS
  3201.0	[m]	DC	PETROS
  3207.0	[m]	DC	PETROS
  3213.0	[m]	DC	PETROS
  3219.0	[m]	DC	PETROS
  3225.0	[m]	DC	PETROS
  3231.0	[m]	DC	PETROS
  3237.0	[m]	DC	PETROS
  3243.0	[m]	DC	PETROS
  3249.0	[m]	DC	PETROS
  3255.0	[m]	DC	PETROS
  3261.0	[m]	DC	PETROS
  3267.0	[m]	DC	PETROS
  3273.0	[m]	DC	PETROS
  3282.0	[m]	DC	PETROS
  3288.0	[m]	DC	PETROS
  3294.0	[m]	DC	PETROS
  3300.0	[m]	DC	PETROS
  3306.0	[m]	DC	PETROS
  3312.0	[m]	DC	PETROS
  3317.0	[m]	DC	PETROS
  3324.0	[m]	DC	PETROS
  3330.0	[m]	DC	PETROS
  3336.0	[m]	DC	PETROS
  3342.0	[m]	DC	PETROS
  3354.0	[m]	DC	PETROS
  3360.0	[m]	DC	PETROS
  3372.0	[m]	DC	PETROS
  3378.0	[m]	DC	PETROS
  3384.0	[m]	DC	PETROS
  3390.0	[m]	DC	PETROS
  3396.0	[m]	DC	PETROS
  3402.0	[m]	DC	PETROS
  3408.0	[m]	DC	PETROS
  3414.0	[m]	DC	PETROS
  3420.0	[m]	DC	PETROS
  3429.0	[m]	DC	PETROS
  3432.0	[m]	DC	PETROS
  3438.0	[m]	DC	PETROS
  3444.0	[m]	DC	PETROS
  3450.0	[m]	DC	PETROS
  3456.0	[m]	DC	PETROS
  3462.0	[m]	DC	PETROS
  3468.0	[m]	DC	PETROS
  3474.0	[m]	DC	PETROS
  3480.0	[m]	DC	PETROS
  3486.0	[m]	DC	PETROS
  3492.0	[m]	DC	PETROS
  3501.0	[m]	DC	PETROS
  3504.0	[m]	DC	PETROS
  3510.0	[m]	DC	PETROS
  3516.0	[m]	DC	PETROS
  3522.0	[m]	DC	PETROS
  3528.0	[m]	DC	PETROS
  3534.0	[m]	DC	PETROS
  3540.0	[m]	DC	PETROS
  3546.0	[m]	DC	PETROS
  3552.0	[m]	DC	PETROS
  3558.0	[m]	DC	PETROS
  3564.0	[m]	DC	PETROS
  3570.0	[m]	DC	PETROS
  3576.0	[m]	DC	PETROS
  3582.0	[m]	DC	PETROS
  3588.0	[m]	DC	PETROS
  3594.0	[m]	DC	PETROS
  3600.0	[m]	DC	PETROS
  3606.0	[m]	DC	PETROS
  3612.0	[m]	DC	PETROS
  3618.0	[m]	DC	PETROS
  3627.0	[m]	DC	PETROS
  3630.0	[m]	DC	PETROS
  3636.0	[m]	DC	PETROS
  3642.0	[m]	DC	PETROS
  3648.0	[m]	DC	PETROS
  3651.0	[m]	DC	PETROS
  3663.0	[m]	DC	PETROS
  3666.0	[m]	DC	PETROS
  3672.0	[m]	DC	PETROS
  3678.0	[m]	DC	PETROS
  3684.0	[m]	DC	PETROS
  3690.0	[m]	DC	PETROS
  3696.0	[m]	DC	PETROS
  3702.0	[m]	DC	PETROS
  3708.0	[m]	DC	PETROS
  3714.0	[m]	DC	PETROS
  3720.0	[m]	DC	PETROS
  3738.0	[m]	DC	PETROS
  3744.0	[m]	DC	PETROS
  3750.0	[m]	DC	PETROS
  3756.0	[m]	DC	PETROS
  3762.0	[m]	DC	PETROS
  3768.0	[m]	DC	PETROS
  3774.0	[m]	DC	PETROS
  3780.0	[m]	DC	PETROS
  3789.0	[m]	DC	PETROS
  3798.0	[m]	DC	PETROS
  3807.0	[m]	DC	PETROS
  3816.0	[m]	DC	PETROS
  3825.0	[m]	DC	PETROS
  3834.0	[m]	DC	PETROS
  3843.0	[m]	DC	PETROS
  3852.0	[m]	DC	PETROS
  3861.0	[m]	DC	PETROS
  3870.0	[m]	DC	PETROS
  3879.0	[m]	DC	PETROS
  3891.0	[m]	DC	PETROS
  3903.0	[m]	DC	PETROS
  3915.0	[m]	DC	PETROS
  3924.0	[m]	DC	PETROS
  3933.0	[m]	DC	PETROS
  3942.0	[m]	DC	PETROS
  3951.0	[m]	DC	PETROS
  3960.0	[m]	DC	PETROS
  3969.0	[m]	DC	PETROS
  3978.0	[m]	DC	PETROS
  3987.0	[m]	DC	PETROS
  3996.0	[m]	DC	PETROS
  4005.0	[m]	DC	PETROS
  4014.0	[m]	DC	PETROS
  4023.0	[m]	DC	PETROS
  4032.0	[m]	DC	PETROS
  4041.0	[m]	DC	PETROS
  4050.0	[m]	DC	PETROS
  4059.0	[m]	DC	PETROS
  4068.0	[m]	DC	PETROS
  4077.0	[m]	DC	PETROS
  4086.0	[m]	DC	PETROS
  4095.0	[m]	DC	PETROS
  4110.0	[m]	DC	PETROS
  4119.0	[m]	DC	PETROS

• Thin sections at the Norwegian Offshore Directorate

  Thin sections at the Norwegian Offshore Directorate

  Depth	Unit
  3068.74	[m ]