Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

36/7-4

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    36/7-4
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    36/7-4
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    ENGIE E&P Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1630-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    71
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    18.07.2016
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    26.09.2016
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    26.09.2018
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    26.09.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    AGAT FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    24.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    349.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2726.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2726.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    86
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ÅSGARD FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 24' 59.72'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    4° 4' 8.06'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6809820.06
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    557055.06
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7988

  • Wellbore history
    Wellbore history
    General
    Well 36/7-4 was drilled to test the Cara prospect ca 5 km northeast of the Gjøa Field in the North Sea. The primary objective was to test for hydrocarbons in the Early Cretaceous Agat Formation.
    Operations and results
    Wildcat well 36/7-4 was spudded with the semi-submersible installation Transocean Arctic on 18 July 2016 and drilled to TD at 2726 m in the Early Cretaceous Åsgard Formation. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis sweeps down to 587 m and with KCl/glycol mud from 587 m to TD.
    Well 36/7-4 successfully penetrated 118.1 of hydrocarbon-bearing Agat Formation sandstone reservoir before reaching a final TD of 2726 m in the Åsgard Formation. The well proved a 51.7 m gas column in good quality reservoir, with a GOC at 2479.2 m. Oil was proven down to close to the base of the Agat sandstone at 2544.4 m, but the reservoir below 2492 m is of reduced quality with low permeability and poor production potential. No oil-water contact (OWC) was seen, neither from pressures, nor on logs or core.
    Three cores were cut from 2437 to 2555 m in the Agat Formation, including the Agat Formation basal conglomerates. MDT fluid samples were taken at 2440 m (gas), 2458.13 m (gas), 2484.03 m (oil), 2488 m (oil), 2536.61 m (oil), and 2544.4 m (oil/water).
    The well was permanently abandoned on 26 September 2016 as an oil and gas discovery.
    Testing
    A drill stem test was conducted from the gas column in the interval 2428 to 2470 m.
    Very good overall reservoir properties were proven. The maximum gas rate achieved was 1240000 Sm3/day, through a 72/64" fixed choke. The gas gravity was 0.6378 (air = 1). The condensate had a density of 0.801 g/cm3 (45.2 ºAPI). The Gas/Condensate Ratio was 15592 Sm3/Sm3. The gas had 0.5% CO2 and 0.2 ppm H2S. Measurements at the end of the main shut-in periods (up to 72 hrs) gave the most representative formation temperatures. The temperature at the gas-oil contact is estimated to 80.0 °C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    590.00
    2726.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2436.9
    2490.7
    [m ]
    2
    2491.0
    2499.7
    [m ]
    3
    2499.7
    2554.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    117.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    439.0
    36
    439.0
    0.00
    SURF.COND.
    20
    583.0
    26
    587.0
    0.00
    PILOT HOLE
    587.0
    9 7/8
    587.0
    0.00
    590.0
    590.0
    1.25
    LOT
    INTERM.
    13 3/8
    1701.0
    17 1/2
    1710.0
    0.00
    1713.0
    1713.0
    1.50
    FIT
    INTERM.
    9 5/8
    2364.0
    12 1/4
    2370.0
    0.00
    2374.0
    2374.0
    1.48
    LOT
    LINER
    7
    2663.0
    8 1/2
    2726.0
    0.00

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2428
    2470
    28.6
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    1240000
    0.801
    0.637
    15592

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR ADT HRLA PEX ECS
    2364
    2724
    FMI MSIP GR
    2364
    2725
    MDT GR
    2429
    2567
    MDT GR SP
    2435
    2536
    MSCT SWC
    2378
    2640
    MWD - DIR ECD
    373
    439
    MWD - GR DIR ECD RES
    439
    587
    MWD - GR DIR ECD RES SON
    487
    590
    MWD - GR DIR ECD RES SON
    590
    1710
    MWD - GR ECD RES SON DIR
    1710
    2115
    MWD - GR ECD RES SON NEU POR DEN
    2115
    2780
    MWD - GR RES ECD RES SON
    373
    587
    USIT CBL GR
    0
    0
    VSP GR
    1689
    2656

  • Lithostratigraphy

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    372
    1.03
    9.0
    Sweeps
    439
    1.15
    40.0
    KCL/Polymer/Glycol
    442
    1.49
    36.0
    Kill/DIsplacment Mud
    504
    1.03
    13.0
    Sweeps
    504
    1.49
    34.0
    Kill/DIsplacment Mud
    535
    1.01
    1.0
    Seawater
    535
    1.17
    19.0
    KCl mud
    587
    1.15
    40.0
    KCL/Polymer/Glycol
    587
    1.49
    34.0
    Kill/DIsplacment Mud
    590
    1.15
    25.0
    KCL/Polymer/Glycol
    917
    1.16
    24.0
    KCL/Polymer/Glycol
    1091
    1.17
    24.0
    KCL/Polymer/Glycol
    1234
    1.16
    23.0
    KCL/Polymer/Glycol
    1488
    1.17
    22.0
    KCL/Polymer/Glycol
    1525
    1.16
    25.0
    KCL/Polymer/Glycol
    1710
    1.17
    26.0
    KCL/Polymer/Glycol
    1710
    1.15
    27.0
    KCL/Polymer/Glycol
    2100
    1.19
    17.0
    KCl mud
    2100
    1.17
    17.0
    KCl mud
    2141
    1.17
    20.0
    KCL/Polymer/GEM
    2374
    1.19
    22.0
    KCL/Polymer/Glycol
    2665
    1.19
    2.0
    NaCl Brine
    2665
    1.21
    17.0
    KCl Polymer GEM
    2726
    1.19
    22.0
    KCL/Polymer/Glycol