Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/2-1

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-1
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-1
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Esso Exploration and Production Norway A/S
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    3-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    30
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    11.07.1967
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    09.08.1967
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    09.08.1969
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    19.10.2006
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    113.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    1906.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    1906.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    73
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PRE-DEVONIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 53' 35.19'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 21' 25.77'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6528477.90
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    462951.38
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    144

  • Wellbore history
    General
    Well 16/2-1 is located on the very western part of the Utsira High in the central part of the Vestland Arch. The Utsira High is a large, flat, fault bounded basement feature. The objective of this early well in the North Sea was: "To test the hydrocarbon potential of the sedimentary section; investigate the lithology and sequence in this portion of the North Sea basin; and to partially fulfil Esso's drilling obligation to the Norwegian Government incurred on behalf of the Licences."
    Operations and results
    Wildcat well 16/2-1 was spudded with the semi-submersible installation Ocean Traveler on 11 July 1967 and drilled to TD at 1906 m, 33 m into basement rock. There were no noteworthy drilling problems encountered while drilling. Initial drilling from the sea floor to 381 m was with seawater and gel without casing. Returns were to the sea floor. Below 381 m to total depth of 1906 m, a seawater slurry with gel, CMC, Spersene, XP-20, Caustic Soda, Barite, and 0-10% diesel oil was used.
    Oil shows were seen on cores in tight Cretaceous carbonate rocks in the Tor Formation. The shows were strong and continuous from top Tor Formation down to 1776 m, and then became patchy. These rocks were too impermeable to justify further tests in this well. Weak shows were seen also in a thin Oligocene sand from 1256 m to 1263 m and in Eocene mudstones from 1631 m to 1637 m, Balder Formation. Dead oil/tar was observed in fractures in the basement rock.
    Five cores were cut from 1739.5 m to 1821.8 m in the Tor Formation chalk and two more cores were cut from 1879.1 m to 1883.7 m in the basement. Four Formation Interval Tests (FIT) were performed at 1748.9 m, 1733.4 m, 1642.6 m, and at 1738.2 m. The tests, one in Early Tertiary shales and three in Late Cretaceous carbonates, did not show any hydrocarbons.
    The well was permanently abandoned on 9 August 1967 as a well with shows.
    Testing
    No drill stem test was performed

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    381.00
    1905.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    5705.0
    5737.0
    [ft ]
    2
    5737.0
    5797.0
    [ft ]
    3
    5796.0
    5856.0
    [ft ]
    4
    5857.0
    5917.0
    [ft ]
    5
    5917.0
    5977.0
    [ft ]
    6
    6165.0
    6170.0
    [ft ]
    7
    6175.0
    6180.0
    [ft ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    86.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    164.0
    36
    164.0
    0.00
    LOT
    SURF.COND.
    20
    186.0
    26
    186.0
    0.00
    LOT
    INTERM.
    13 3/8
    363.0
    17 1/2
    363.0
    0.00
    LOT
    INTERM.
    9 5/8
    1110.0
    12 1/4
    1110.0
    0.00
    LOT
    OPEN HOLE
    1905.0
    8 1/2
    1905.0
    0.00
    LOT

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BHC SONIC GR
    140
    1907
    CDM
    365
    1910
    FDC
    365
    1910
    IES
    365
    1909
    LL7
    365
    1908
    MLL
    365
    1910

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.27

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.26

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.25
    pdf
    3.70

  • Documents – Norwegian Offshore Directorate papers
    Documents – Norwegian Offshore Directorate papers
    Document name
    Document format
    Document size [MB]
    pdf
    11.51
    pdf
    51.08

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    164
    0.00
    sea water
    381
    0.00
    sea water/g

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1650.0
    [ft]
    DC
    2550.0
    [ft]
    DC
    3110.0
    [ft]
    DC
    3200.0
    [ft]
    DC
    3290.0
    [ft]
    DC
    3380.0
    [ft]
    DC
    3400.0
    [ft]
    DC
    3410.0
    [ft]
    DC
    3470.0
    [ft]
    DC
    3500.0
    [ft]
    DC
    3560.0
    [ft]
    DC
    3590.0
    [ft]
    DC
    3650.0
    [ft]
    DC
    3710.0
    [ft]
    DC
    3740.0
    [ft]
    DC
    3800.0
    [ft]
    DC
    3830.0
    [ft]
    DC
    3910.0
    [ft]
    DC
    3970.0
    [ft]
    DC
    4000.0
    [ft]
    DC
    4090.0
    [ft]
    DC
    4134.0
    [ft]
    SWC
    4140.0
    [ft]
    SWC
    4180.0
    [ft]
    DC
    4210.0
    [ft]
    DC
    4270.0
    [ft]
    DC
    4300.0
    [ft]
    DC
    4360.0
    [ft]
    DC
    4390.0
    [ft]
    DC
    4420.0
    [ft]
    DC
    4426.0
    [ft]
    SWC
    4460.0
    [ft]
    DC
    4480.0
    [ft]
    DC
    4500.0
    [ft]
    DC
    4553.0
    [ft]
    DC
    4580.0
    [ft]
    DC
    4600.0
    [ft]
    DC
    4660.0
    [ft]
    DC
    4680.0
    [ft]
    DC
    4760.0
    [ft]
    DC
    4780.0
    [ft]
    DC
    4860.0
    [ft]
    DC
    4880.0
    [ft]
    DC
    4943.0
    [ft]
    SWC
    4960.0
    [ft]
    DC
    4960.0
    [ft]
    DC
    4980.0
    [ft]
    DC
    5022.0
    [ft]
    SWC
    5022.0
    [ft]
    DC
    5036.0
    [ft]
    SWC
    5038.0
    [ft]
    DC
    5060.0
    [ft]
    DC
    5080.0
    [ft]
    DC
    5144.0
    [ft]
    DC
    5144.0
    [ft]
    SWC
    5160.0
    [ft]
    DC
    5180.0
    [ft]
    DC
    5226.0
    [ft]
    SWC
    5226.0
    [ft]
    DC
    5260.0
    [ft]
    DC
    5280.0
    [ft]
    DC
    5350.0
    [ft]
    SWC
    5360.0
    [ft]
    SWC
    5360.0
    [ft]
    DC
    5371.0
    [ft]
    SWC
    5375.0
    [ft]
    DC
    5400.0
    [ft]
    DC
    5460.0
    [ft]
    DC
    5480.0
    [ft]
    DC
    5540.0
    [ft]
    DC
    5560.0
    [ft]
    DC
    5580.0
    [ft]
    DC
    5580.0
    [ft]
    DC
    5600.0
    [ft]
    DC
    5612.0
    [ft]
    SWC
    5620.0
    [ft]
    DC
    5620.0
    [ft]
    DC
    5660.0
    [ft]
    DC
    5680.0
    [ft]
    DC
    5707.0
    [ft]
    DC
    ESSO
    5715.0
    [ft]
    DC
    ESSO
    5726.5
    [ft]
    SWC
    ESSO
    5739.0
    [ft]
    DC
    ESSO
    5752.5
    [ft]
    SWC
    ESSO
    5763.5
    [ft]
    SWC
    ESSO
    5773.0
    [ft]
    DC
    ESSO
    5780.0
    [ft]
    DC
    5789.0
    [ft]
    DC
    ESSO
    5801.5
    [ft]
    SWC
    ESSO
    5815.0
    [ft]
    DC
    ESSO
    5828.5
    [ft]
    SWC
    ESSO
    5839.5
    [ft]
    SWC
    ESSO
    5852.5
    [ft]
    SWC
    ESSO
    5856.0
    [ft]
    DC
    5863.0
    [ft]
    DC
    ESSO
    5871.0
    [ft]
    SWC
    5875.0
    [ft]
    DC
    ESSO
    5887.0
    [ft]
    DC
    ESSO
    5902.0
    [ft]
    DC
    ESSO
    5916.0
    [ft]
    DC
    ESSO
    5929.0
    [ft]
    DC
    ESSO
    5940.0
    [ft]
    DC
    ESSO
    5951.0
    [ft]
    DC
    ESSO
    5965.0
    [ft]
    DC
    ESSO
    5977.0
    [ft]
    DC
    ESSO
    5980.0
    [ft]
    DC
    6030.0
    [ft]
    DC
    6040.0
    [ft]
    DC
    6060.0
    [ft]
    DC
    6080.0
    [ft]
    DC
    6090.0
    [ft]
    DC
    6110.0
    [ft]
    DC
    6110.0
    [ft]
    DC
    6120.0
    [ft]
    DC
    6130.0
    [ft]
    DC
    6130.0
    [ft]
    DC
    6140.0
    [ft]
    DC
    6180.0
    [ft]
    DC
    6230.0
    [ft]
    DC