Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/10-46 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-46 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    RE-CLASS TO DEV
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-46
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil ASA (old)
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1030-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    79
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.11.2001
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    30.01.2002
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    30.01.2004
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    30.01.2002
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    03.05.2004
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reclassified to wellbore
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    TARBERT FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    82.2
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    134.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    5568.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2368.0
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    94
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    STATFJORD GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 10' 33.86'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 11' 23.22'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6782830.47
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    456420.11
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    4489
  • Wellbore history

    General
    Well 34/10-46 S was drilled to a structure 5 km southwest of the Gullfaks field. The primary objective of the well was to be a water injector in Tarbert.. The other purposes of the well were to prove and produce oil from the Statfjord Formation D1-segment. On the way to the main target the well was going to prove and later produce oil from the Brent Group in the E1-segment.
    Operations and results
    The wildcat well 34/10-46 S was spudded on 12 December 2001 from the permanent installation Gullfaks A and drilled to TD at 5568 m in the Early Jurassic Statfjord Formation. The well was drilled with WBM down to 17 1/2" section, with low KCL content in the upper part of the 17 1/2" section. The 12 1/4" section was drilled with OBM to TD.
    Shallow gas underneath GFA was expected in the intervals 392-399 m and possibly 559-567 m TVD RKB. The possible shallow gas zones in the 24" section were not logged. There was no increase of gas values in the specified intervals.
    In well 34/10-46 S/46 A/46 B the Brent Group in segment E1 and the Statfjord Formation in segment D1 were reached by the 12 1/4" section. Base Cretaceous was penetrated 65 m deeper than prognosis due to a too shallow seismic interpretation. The top of the Brent Group was faulted out in the well and the Tarbert Formation was penetrated 29 m deeper than prognosis. The main fault between the E1 and D1 segments and the top Statfjord Formation were encountered at about estimated depths. A small gas discovery was made in the Brent Group in segment E1, whereas the Statfjord Formation in segment D1 was water-filled.
    The reported reservoir pressures in well bore A-46 S are prognosed initial pressures, as no pressure measurements were performed in this well track. No fluid samples were collected and no coring was performed in the well.
    Only minor amounts of hydrocarbons were encountered, and the well 34/10-46 S was plugged back on 30 January 2002 and re-classed to development well 34/10-A-48. Due to the water-filled Statfjord Formation in segment D1 it was decided to drill a side track, 34/10-46 A to the Cretaceous/Brent Group prospect D1.
    Testing
    No drill stem test was performed
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    20
    1227.0
    24
    1232.0
    1.64
    LOT
    INTERM.
    13 3/8
    2747.0
    17 1/2
    2751.0
    1.79
    LOT
    OPEN HOLE
    5568.0
    12 1/4
    5568.0
    0.00
    LOT
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD LWD - GR
    361
    1232
    MWD LWD - GR
    1232
    2751
    MWD LWD - GR
    2751
    5568
  • Lithostratigraphy

    Lithostratigraphy
    Top depth [mMD RKB]
    Lithostrat. unit
    216
    1728
    2230
    2230
    2530
    3251
    5207
    5207
    5245
    5245
    5273
    5273
    5428
  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .PDF
    1.39
    .PDF
    0.58
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    344
    1.03
    12.0
    CMC/SEAWATER
    361
    1.04
    10.0
    CMC/SEAWATER
    399
    1.04
    10.0
    CMC/SEAWATER
    525
    1.14
    17.0
    CMC/SEAWATER
    997
    1.15
    11.0
    CMC/SEAWATER
    1227
    1.20
    19.0
    CMC/SEAWATER
    1232
    1.20
    12.0
    CMC/SEAWATER
    1787
    1.50
    13.0
    KCL/GLYCOL/POLY
    1989
    1.55
    12.0
    KCL/PAC/XANVIS
    1999
    1.58
    20.0
    KCL/PAC/XANVIS
    2374
    1.59
    20.0
    KCL/PAC/XANVIS
    2702
    1.59
    21.0
    KCL/PAC/XANVIS
    2751
    1.59
    24.0
    KCL/PAC/XANVIS
    2751
    1.59
    28.0
    KCL/PAC/XANVIS
    2779
    1.64
    45.0
    VERSAVERT
    3900
    1.64
    60.0
    VERSAVERT
    4000
    1.64
    42.0
    VERSAVERT
    4680
    1.64
    51.0
    VERSAVERT
    4902
    1.64
    57.0
    VERSAVERT
    5176
    1.64
    50.0
    VERSAVERT