Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
01.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/2-6

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-6
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-6
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1311-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    63
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    20.07.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    20.09.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    20.09.2012
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    16.10.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA DRAUPNE FM SS
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    VESTLAND GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    115.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2131.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2131.0
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ZECHSTEIN GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 49' 25.26'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 36' 54.76'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6520633.12
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    477779.05
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6374
  • Wellbore history

    General
    Well 16/2-6 was drilled on the Avaldsnes prospect on the Utsira High in the North Sea. The primary objective was to prove oil in Jurassic and pre-Jurassic sandstone in the Karmsund Graben. The secondary objective was to prove oil in the Paleocene Ty Formation Sandstone. Planned TD was 50 m into solid basement rock.
    Operations and results
    Wildcat well 16/2-6 was spudded with the semi-submersible installation Transocean Winner on 20 July 2010 and drilled to TD at 2131 m. The well encountered severe loss problems in the Zechstein Group and a technical sidetrack was drilled (well 16/2-6 T2) through the reservoir. The sidetrack was kicked off from 1830 m and drilled to 2131 m where severe losses again were experienced and the well was completed without reaching its planned TD. All wire line logging and a DST were performed in the sidetrack. The well was drilled with seawater and hi-vis pills down to 748 m and with Glydril WBM (3- 5% glycol) from 748 m to TD.
    No Ty Formation sand was seen in the well. Top Viking Group, Draupne Formation was encountered at 1925.5 m (1927.5 m in sidetrack) and top of the Draupne reservoir sand came in at 1931 m (1931 m in sidetrack). The top of the reservoir consists of an 8 m thick, coarse to very coarse, sand. Underlying this is finer grained sand laminated with shale. A reworked calcareous formation lies on top of the Triassic. Pressure points, MDT sampling and DST results confirmed the presence of oil in the reservoir with an oil-water contact at 1948.6 m. Residual oil was found down to 1966 m. In addition to the main reservoir section, oil was sampled in calcareous slumps with vuggy porosity between the Jurassic sandstone and the Triassic. Apart from this there were no shows of hydrocarbons reported elsewhere in the well bores.
    Three conventional cores were cut from 5 m into the Draupne sandstone, through the Middle Jurassic Vestland Group down to 1961.5 m in the Late Triassic Skagerrak Formation. MDT fluid samples were taken at 1933.2 m (oil), 1936.0 m (oil), 1945.2 m (oil), 1948 m (oil and water), 1953 m (water), and at 1962.5 m (water and oil).
    The well was permanently abandoned on 20 September 2010 on as an oil discovery.
    Testing
    A drill stem test was performed from the interval 1931.8 m to 1938.1 m. The test flowed 786 Sm3 oil and 18700 Sm3 through a 52/64" choke. At single stage separation The GOR was 39.6 Sm3/Sm3, the oil density was 0.891 g/cm3, and the gas gravity was 1.012 (air = 1). The maximum DST temperature was 82.7 deg C. The interpretation of the DST indicated a continuous reservoir without barriers in a radius of 2-3 km with extremely good flow characteristics.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    750.00
    2131.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1935.0
    1939.5
    [m ]
    2
    1939.5
    1956.2
    [m ]
    3
    1958.6
    1960.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    22.9
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    11.09.2010 - 00:00
    YES
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    218.0
    36
    220.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    742.0
    17 1/2
    748.0
    1.81
    LOT
    PILOT HOLE
    750.0
    9 7/8
    750.0
    0.00
    LOT
    INTERM.
    9 5/8
    1803.0
    12 1/4
    1810.0
    1.75
    LOT
    OPEN HOLE
    2131.0
    8 1/2
    2131.0
    0.00
    LOT
  • Drill stem tests (DST)

    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1932
    1938
    20.6
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    780
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR HRLA XPT
    1835
    2060
    FMI MSIP
    1300
    2070
    HRLA PEX ECS HNGS
    1803
    2070
    LWD - GR RES DEN NEU SON PWD DIR
    748
    2131
    LWD - GR RES PWD DIR
    141
    750
    LWD - GR RES PWD DIR
    1803
    2068
    LWD - GR RES SON DEN NEU
    2083
    2122
    LWD - PWD DIR
    141
    748
    MDT GR
    1932
    2027
    MSCT GR
    1820
    2053
    VSP GR
    115
    2072
  • Lithostratigraphy

  • Geochemical information

    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.29
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    752
    1.30
    Water
    1633
    1.35
    Water
    1810
    1.37
    Water
    1814
    1.20
    Water
    1965
    1.20
    Water
    2010
    1.18
    Water
    2082
    1.20
    Water
    2103
    1.25
    Water
    2128
    1.20
    Water
    2131
    1.25
    Water