Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
26.11.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-14

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-14
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Multilateral
    Indicator telling if the parent well is multilateral, meaning it has more than one branch radiating from the main borehole. Example of legal values: YES, NO. See also Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    NO
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-14
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1315-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    66
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    26.09.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    30.11.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    30.11.2012
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    30.11.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EOCENE
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA BALDER FM SS
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    PALEOCENE
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    HEIMDAL FM
    3rd level with HC, age
    Age of lithostratigraphic unit, 3rd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY CRETACEOUS
    3rd level with HC, formation
    Name of lithostartigraphic unit, 3rd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    INTRA ÅSGARD FM SS
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    110.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2550.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2550.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    10
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    99
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 53' 9.28'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 12' 10.46'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6527772.15
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    454052.09
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6399

  • Wellbore history
    General
    Well 16/1-14 was drilled to explore the Jurassic Apollo Prospect situated south of the Draupne Discovery and down flank of the Luno Discovery. The well is located on the eastern margin of the South Viking Graben in the North Sea. The structure is situated between eastern part of the Gudrun Terrace and the western flank of the Utsira High. The primary objective was to test the Vestland Group, Hugin Formation sands and to verify communication with the 16/1-9 Draupne Discovery. A thickening and improving reservoir quality in the Hugin Formation, when compared to well 16/1-9 was expected towards the Apollo. Prospect.
    Operations and results
    Well 16/1-14 was drilled with the semi-submersible installation Transocean Winner. First a 9 7/8" pilot hole was drilled to 606 m. This hole was abandoned due to shallow gas and it was named 16/1-U-6.  Wildcat well 16/1-14 was spudded ca 15 m west of 16/1-U-6 on 26 September 2010 and drilled to TD at 2550 m in Late Triassic sediments of the Skagerrak Formation. As the Cretaceous to Eocene hydrocarbon bearing reservoirs were insufficiently logged and cored a sidetrack was decided. The 16/1-14 T2 sidetrack was made through a window in the 9 5/8" casing at 1800 m. The sidetrack was drilled to TD at 2295 m (2293.4 m TVD) in the Late Jurassic Draupne Formation. The well was drilled with seawater and hi-vis sweeps down to 378 m and with Glydril mud from 378 m to TD in both well tracks.
    The primary objective of the well was not realised because the Hugin Formation was found to be dry. However, well 16/1-14 encountered oil in three levels, the Balder Formation, the Heimdal Formation and one in the Lower Cretaceous (Berriasian to Valangian) Åsgard Formation. Free water levels were estimated to be at 2004 m (1978 m TVD MSL) in the Paleocene (Balder-Heimdal) discovery and at 2181 m (2155 m TVD MSL) in the Lower Cretaceous Åsgard discovery. In well 16/1-14 several thin sands were encountered in the Lista Formation. The sands were oil-filled and displayed moderate properties from log analysis. However, no fluid gradients could be acquired from pressure-points. In the sidetrack, 16/1-14 T2, the corresponding sand intervals were found to be missing or to be thinner. In the Heimdal Formation 6.5 to 7 m net sand of good quality was interpreted from the logs. Oil was confirmed by sampling. In the Åsgard Formation, a 9 m interval of very good sand was oil filled. Mobilities derived from the MDT results showed up to 3500 mD/cp. A water filled Intra Draupne Formation sandstone was found 16 m thick in the primary well bore, but was only 4 m thick in the sidetrack, indicating a pinch-out of this sand towards the south-west. The primary target Hugin Formation came in at 2472 m; deeper than prognosed and water bearing. However, oil shows were recorded from 2472 m to 2495 m. Weak oil shows were also recorded in intervals in siltstones and claystones of the Draupne and Heather formations.
    Three conventional cores were cut in the main wellbore from 2373 m to 2454.6 m, and four additional cores were cut in the sidetrack from 2052 m to 2101 m and from 2167 m to 2221.46 m. In 16/1-14 fluid scanning (LFA) confirmed oil at 2063.3 m, and at 2098.1 m, where 3 oil samples were acquired. A further MDT water sample was acquired at 2491.5 m. In the sidetrack MDT oil samples were acquired at 1998 m (Balder Formation), 2002.8 m (Balder Formation), 2102.2 m (Heimdal Member) and 2174 and 2178.8 m (Åsgard Formation). MDT water samples were acquired in the sidetrack at 2106 m (Heimdal Member) and 2188 m (Åsgard Formation).
    The well was permanently abandoned on 30 November 2010 as an oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    380.00
    2548.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2373.0
    2413.1
    [m ]
    2
    2400.1
    2427.7
    [m ]
    3
    2427.7
    2454.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    94.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    211.0
    36
    215.0
    0.00
    LOT
    SURF.COND.
    20
    371.0
    26
    378.0
    1.60
    LOT
    PILOT HOLE
    606.0
    9 7/8
    606.0
    0.00
    LOT
    INTERM.
    13 3/8
    1478.0
    17 1/2
    1484.0
    1.99
    LOT
    INTERM.
    9 5/8
    2228.0
    12 1/4
    2235.0
    1.57
    LOT
    OPEN HOLE
    2550.0
    8 1/2
    2550.0
    0.00
    LOT

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MDT GR
    1478
    2235
    MDT GR
    2491
    2491
    MSCT
    2238
    2530
    MWD - DIR GR RES PWD
    136
    606
    MWD - DIR GR RES PWD SON DEN NEU
    1478
    2549
    MWD - DIR PWD GR RES SON
    372
    1473
    PEX HRLA MSIP
    2227
    2523
    VSI
    789
    2540
    XPT GR
    2227
    2548

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    txt
    0.00
    txt
    0.55

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    166
    1.05
    Water
    300
    1.25
    Water
    378
    1.20
    Water
    477
    1.50
    Water
    1053
    1.23
    Water
    1484
    1.29
    Water
    1517
    1.29
    Water
    2079
    1.25
    Water
    2235
    1.38
    Water
    2295
    1.25
    Water
    2550
    1.20
    Water