Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
28.04.2024 - 01:35
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/1-15

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-15
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/1-15
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN 0902 R10 inline 1488 & crossline 5496
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1334-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    74
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    22.01.2011
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.04.2011
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    05.04.2013
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    05.04.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY CRETACEOUS
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA ÅSGARD FM SS
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    PRE-DEVONIAN
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BASEMENT
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    111.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2150.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2150.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    94
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PRE-DEVONIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 52' 23.82'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 15' 41.3'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6526327.33
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    457412.51
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6517

  • Wellbore history
    General
    Well 16/1-15 was drilled on the western side of the Utsira High in the North Sea. The objective was to test Jurassic/Triassic sandstones prognosed at 1925 in the Tellus prospect north of the Luno Discovery. The Luno Discovery has later been officially named the Edvard Grieg Field. The Tellus prospect was separated from Luno by a fault zone trending NW SE.
    Operations and results
    Wildcat well 16/1-15 was spudded with the semi-submersible installation Bredford Dolphin on 22 January 2011 and drilled to TD at 2150 m, 230 m into pre-Devonian basement rock. Due to possible shallow gas sands a precautionary 9 7/8" pilot hole was drilled down to 585 m. Only water filled sands were seen. Several incidents interrupted the progress where the most serious was a failed 20" casing cement job. The other incidents were related to the BOP and a stuck wire line string. The well was drilled with seawater and sweeps down to 585 m, and with Performadril mud from 585 m to TD.
    The well proved an oil column of 48 metres in a thin, Intra Åsgard Formation Sandstone directly overlying weathered and porous / fractured basement. Top of fractured basement was at 1920 m. No Triassic or Jurassic sediments were identified in the well. The Intra Åsgard Formation Sandstone is a chalk arenite, 2.7m thick, with excellent reservoir properties. An oil/water contact was established at approximately 1965 m (1940 m TVD MSL). The acquired pressure, geochemistry and PVT data supports communication between the Luno and Tellus Discoveries, making the Tellus area a northern extension of the Luno Discovery.
    Intermittent oil shows were described on core 1 immediately above the reservoir in a thin Hod Formation limestone. Below OWC shows were described on cores down to 1976 m. Further weak shows were described on cuttings down to 1997 m.
    A total of 61 meter core was recovered in four cores from 1915 to 1976 m (all core depths 2.15 m deeper than logger's depth) in the Hod Formation, Intra Åsgard Formation Sandstones and Basement. The overall recovery rate was 85.2%. Fluid sampling, water and oil, was performed using an extra-large diameter MDT-probe and dual packer. Samples were taken in the oil bearing zone at 1918.99 m, 1921.47 m, 1923.81 m, 1932.96 m,1937.23 m, 1952.43 m, 1959.62 m, and 1967.04 m. A water sample was taken at 2030.52 m. The oil samples show an under saturated light oil similar to the oil found in the Luno Field. The typical GOR from the MDT samples was 125 Sm3/Sm3, the oil density was 0.72 g/cm3 and the gas gravity was 0.95 (air=1).
    The well was plugged back to the 20" casing shoe on 5 April 2011 and a sidetrack 16/1-15 A was prepared. Well 16/1-15 is classified as an oil appraisal.
    Testing
    Two drill stem tests were performed.
    DST 1 tested the interval 1926 to 1960 m in the basement. After a slow initial production, the perforations were cleaned up and the well produced with a continuous flow to surface with an oil-rate of 105 sm3/d on a 40/64" choke and a bottom-hole pressure of 56.6 bar. No water was produced. This was the first successful full-scale production test of a reservoir consisting of cracked and porous bedrock on the Norwegian Continental Shelf.
    DST 2 tested the interval 1917 to 1920 m in the Intra Åsgard Formation Sandstone. The main flow produced 470 sm3/d on a 36/64" choke with a bottom-hole pressure of 179.7 bar. No water was produced. The average GOR was 90 Sm3/Sm3. The maximum temperature at reference depth 1916.9 m was 84.5 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    590.00
    2150.28

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1915.0
    1931.2
    [m ]
    2
    1931.2
    1937.1
    [m ]
    3
    1946.0
    1960.1
    [m ]
    4
    1960.3
    1976.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    52.1
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    0.00
    0.00
    YES
    MDT
    2067.80
    0.00
    OIL
    07.05.2011 - 00:00
    NO

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1926
    1960
    15.8
    2.0
    1917
    1920
    15.8
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    105
    2.0
    620

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR XPT EDTC
    1872
    2146
    FMI PPC MSIP PPC ECRD LEH QT
    1466
    1872
    FMI PPC MSIP PPC ECRD LEH QT
    1872
    2149
    HRLA PEX ECS HNGS
    1872
    2144
    MDT GR LEH QT
    1872
    2149
    MRX LEH QT
    1872
    2149
    MWD LWD - GR RES DEN NEU AC PWD
    557
    2147
    MWD LWD - GR RES PWD DIR
    131
    582
    VSP GR
    136
    2085

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    214.0
    36
    214.0
    0.00
    LOT
    SURF.COND.
    20
    576.0
    26
    585.0
    1.70
    LOT
    PILOT HOLE
    585.0
    9 7/8
    585.0
    0.00
    LOT
    INTERM.
    9 5/8
    1874.0
    12 1/4
    1880.0
    1.91
    LOT
    LINER
    7
    2148.0
    8 1/2
    2150.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    517
    1.35
    16.0
    Polymer Mud
    585
    1.29
    27.0
    PERFORMADRIL
    585
    1.30
    30.0
    PERFORMADRIL
    585
    1.30
    30.0
    Performadril WBM
    619
    1.30
    27.0
    PERFORMADRIL
    635
    1.35
    16.0
    Polymer Mud
    1880
    1.35
    41.0
    PERFORMADRIL
    1914
    1.20
    29.0
    PERFORMADRIL
    1931
    1.20
    27.0
    PERFORMADRIL
    1939
    1.20
    26.0
    PERFORMADRIL
    1960
    1.20
    26.0
    PERFORMADRIL
    1976
    1.20
    27.0
    PERFORMADRIL
    2150
    1.20
    sodium chloride brine
    2150
    1.20
    29.0
    PERFORMADRIL

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22